Download or read book Heat Transfer Augmentation Methods of Plate Fin Natural Convection Heat Sinks written by and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Enhancement in Plate and Fin Extended Surfaces written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-06-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver fin, heat transfer and friction correlations, flow structure in the louver fin array, analytical model for heat transfer and friction, convex louver fin, wavy fin, 3D corrugated fin, perforated fin, pin fins and wire mesh, types of vortex generators, metal foam fin, plain fin, packings, numerical simulation of various types of fins.
Download or read book Resource Constrained Heat Sink Optimization written by Madhusudan Krishnan Iyengar and published by . This book was released on 2003 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enhancement of Natural Convection Heat Transfer from Heat Sinks by Shrouding written by Peter Tien Lin Zing and published by . This book was released on 1987 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Analysis of Heat Transfer for Fin Type Surfaces written by Bengt Sundén and published by Witpress. This book was released on 2000 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descripción del editor: "This volume is concerned with the heat transfer from extended surfaces, such as fins attached to a primary transfer surface. These are used extensively within heat exchanges and on heat transfer equipment to ensure that a specified rate of heat transfer is achieved between a heat source and sink. All of the chapters come from invited contributors and follow a unified outline and presentation.Contents: Overview of Extended Surface Heat Transfer ââ,¬â€œ Fins; Coupled Forced Convection, Conduction and Thermal Radiation of a Rectangular Fin in a Confined Space; Mechanistic Investigation of the Performance of a Triangular Fin; Conjugate Free and Mixed Convection Heat Transfer from a Vertical Fin Embedded in a Porous Medium; About Fin Performance and Optimization; Two-Dimensional Effects in Extended Surface Assessment; Steady-State Heat Transfer and Performance Assessment; Multi-Louvred Fin Surfaces; Methodology for the Design of Multi-Stream Plate-Fin Heat Exchangers; Incorporation of a Consideration of Operability into the Design of Multi-Stream Heat Exchangers." (WIT Press).
Download or read book Extended Surface Heat Transfer written by Allan D. Kraus and published by John Wiley & Sons. This book was released on 2002-03-14 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drei anerkannte Experten dieses schnellebigen, modernen Fachgebiets erläutern hier Theorie, Design und Anwendungen eines breiten Spektrums von Oberflächen, die speziell für den effizienten Wärmetransport ausgelegt sind. Behandelt werden u. a. kompakte Wärmetauscher, periodische Wärmeströme und Siedevorgänge an Kühlrippen. Umfassend und informativ!
Download or read book Advanced Computational Methods in Heat Transfer written by and published by . This book was released on 2000 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Enhanced Heat Transfer written by Ralph L. Webb and published by Wiley-Interscience. This book was released on 1994-03-28 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indeed, today "second generation" enhancement concepts are routing in the automotive and refrigeration industries to obtain lower cost, smaller heat exchanger size, and higher energy efficiency in system operation. And the aerospace, process, and power generation industries are not far behind.
Download or read book Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-26 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with externally finned tubes, their geometric parameters, Reynolds number, dimensionless variables, friction factor, plain plate fins on round tubes, the effect of fin spacing, correlations, pain individually finned tubes, circular fins with staggered tubes, low integral fin tubes, wavy fin, enhanced plate fin geometries with round tubes, Offset Strip Fins, convex louver fins, louvered fin, perforated fin, mesh fin, vortex generator, enhanced circular fin geometries, spine or segmented fin, wire loop fin, flat extruded tubes with internal membranes, plate and fin automotive radiators, performance comparison, numerical simulation, advanced fin geometries, hydrophilic coatings, internally finned tubes and annuli, spirally fluted and indented tube, advanced internal fin geometries, and finned annuli. The book is ideal for professionals and researchers dealing with thermal management in devices.
Download or read book Study of Forced Convection Heat Transfer from an Array of Elliptical Pin Fin Heat Sink written by Independently Published and published by . This book was released on 2018-08-16 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modernization, heat sink plays a key role to enhance heat transfer. A heat sink is a device which helps to dissipate the heat from heated surface using direct contact or radiant thermal contact. Heat sinks are basically used to enhance the heat transfer from the heated surface to eliminate the effect of overheating or burning. The heat sinks made up of copper and aluminum and directly attached to the heated surface. Extended surfaces are commonly used to improve the heat transfer in many industries. The extended surface of heat sink helps to increase the surface area in contact with air. It maintains the thermal stability of the system in limits for every electrical and electronic component of any system. There are different kinds of heat sink with different fin geometries and operating with natural or forced convection. Most of the work has been done on rectangular pin fin and circular pin fin under natural and forced convection. In present work, the modeling and fabrication is done on elliptical heat sink and perforated elliptical heat sink with circular perforation. In this work different wattages (100, 150, 200 and 250 W) are used with Reynolds number ranging from 8400 to 21000. The various flow velocities used are 4m/sec, 6m/sec, 8m/sec and 10m/sec. The perforation is done in the middle of the pin fin to achieve maximum heat transfer. The overall performance of the pin fin heat sink is affected by the perforation. In present study the experiment analysis is performed w.r.t the heat transfer coefficient, temperature variation and nusselt number for heat sinks. In experiment the working fluid is used as air. In the present work two different arrangements: elliptical pin fin heat sink and perforated elliptical pin fin heat sink are selected. Within the Reynolds number range 8400 to 21000 perforated elliptical pin fin heat has higher heat transfer coefficient in comparison to elliptical pin fin heat sink. The temperature variation in perforated elliptical pin fin heat sink is more as compare to other one. It was observe that the Nusselt number is directly proportional to the number of perforations. As the number perforation or perforation size increases the heat transfer coefficient also increases.
Download or read book Advances in Mechanical Engineering written by B. B. Biswal and published by Springer Nature. This book was released on 2020-01-16 with total page 1688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018). The book contains peer reviewed articles covering thematic areas such as fluid mechanics, renewable energy, materials and manufacturing, thermal engineering, vibration and acoustics, experimental aerodynamics, turbo machinery, and robotics and mechatronics. Algorithms and methodologies of real-time problems are described in this book. The contents of this book will be useful for both academics and industry professionals.
Download or read book Advances in Heat Transfer Enhancement written by Sujoy Kumar Saha and published by Springer. This book was released on 2016-04-23 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief addresses the phenomena of heat transfer enhancement. A companion edition in the SpringerBrief Subseries on Thermal Engineering and Applied Science to three other monographs including “Critical Heat Flux in Flow Boiling in Microchannels,” this volume is idea for professionals, researchers, and graduate students concerned with electronic cooling.
Download or read book Square Wave Voltammetry written by Valentin Mirceski and published by Springer Science & Business Media. This book was released on 2007-11-08 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a real tour-de-force of scientific publishing, three distinguished experts here systematically deliver both the underlying theory and the practical guidance needed to effectively apply square-wave voltammetry techniques. Square-wave voltammetry is a technique used in analytical applications and fundamental studies of electrode mechanisms. In order to take full advantage of this technique, a solid understanding of signal generation, thermodynamics, and kinetics is essential. Not only does this book cover all the necessary background and basics, but it also offers an appendix on mathematical modeling plus a chapter on electrode mechanisms that briefly reviews the numerical formulae needed to simulate experiments using popular software tools.
Download or read book Thermal Performance of Nanofluids in Miniature Heat Sinks with Conduits written by S. Harikrishnan and published by Springer Nature. This book was released on 2022-01-04 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book focuses on the basic physical features and purpose of nanofluids and miniature heat sinks. The contents demonstrate the design modification, fabrication, experimental investigation, and various applications of miniature heat sinks. The book provides context for thermal performance of miniature heat sinks as well as summaries of experimental results correlations that reflect the current technical innovations are included. This book is a useful reference for both academia and industry alike.
Download or read book Computational Fluid Dynamics written by Jiri Blazek and published by Elsevier. This book was released on 2005-12-20 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences as well as in biology. The objective of this book is to provide university students with a solid foundation for understanding the numerical methods employed in today's CFD and to familiarise them with modern CFD codes by hands-on experience. It is also intended for engineers and scientists starting to work in the field of CFD or for those who apply CFD codes. Due to the detailed index, the text can serve as a reference handbook too. Each chapter includes an extensive bibliography, which provides an excellent basis for further studies.
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
