Download or read book Handbook of Laboratory Health and Safety written by R. Scott Stricoff and published by Wiley-Interscience. This book was released on 2010-10-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Laboratory Health and Safety 3rd Edition provides a valuable reference tool for chemical and industrial hygienists, laboratory personnel, and professionals who need information and guidance on health and safety issues and regulatory compliance. It presents a feasible, easy-to-use approach to provide a safe workplace and to help protect the surrounding community and environment while complying with regulatory requirements. This new edition provides updates to regulations in the field, changes in crisis management and emergency planning, biosafety, advances in ergonomics, behavioral safety science, laboratory design, and laboratory ventilation, hoods and vented enclosures.
Download or read book Biosafety in the Laboratory written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1989-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosafety in the Laboratory is a concise set of practical guidelines for handling and disposing of biohazardous material. The consensus of top experts in laboratory safety, this volume provides the information needed for immediate improvement of safety practices. It discusses high- and low-risk biological agents (including the highest-risk materials handled in labs today), presents the "seven basic rules of biosafety," addresses special issues such as the shipping of dangerous materials, covers waste disposal in detail, offers a checklist for administering laboratory safetyâ€"and more.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Safe Science written by National Research Council and published by National Academies Press. This book was released on 2014-10-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent serious and sometimes fatal accidents in chemical research laboratories at United States universities have driven government agencies, professional societies, industries, and universities themselves to examine the culture of safety in research laboratories. These incidents have triggered a broader discussion of how serious incidents can be prevented in the future and how best to train researchers and emergency personnel to respond appropriately when incidents do occur. As the priority placed on safety increases, many institutions have expressed a desire to go beyond simple compliance with regulations to work toward fostering a strong, positive safety culture: affirming a constant commitment to safety throughout their institutions, while integrating safety as an essential element in the daily work of laboratory researchers. Safe Science takes on this challenge. This report examines the culture of safety in research institutions and makes recommendations for university leadership, laboratory researchers, and environmental health and safety professionals to support safety as a core value of their institutions. The report discusses ways to fulfill that commitment through prioritizing funding for safety equipment and training, as well as making safety an ongoing operational priority. A strong, positive safety culture arises not because of a set of rules but because of a constant commitment to safety throughout an organization. Such a culture supports the free exchange of safety information, emphasizes learning and improvement, and assigns greater importance to solving problems than to placing blame. High importance is assigned to safety at all times, not just when it is convenient or does not threaten personal or institutional productivity goals. Safe Science will be a guide to make the changes needed at all levels to protect students, researchers, and staff.
Download or read book CRC Handbook of Laboratory Safety 5th Edition written by A. Keith Furr and published by CRC Press. This book was released on 2000-04-12 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and updated, The CRC Handbook of Laboratory Safety, Fifth Edition provides information on planning and building a facility, developing an organization infrastructure, planning for emergencies and contingencies, choosing the correct equipment, developing operational plans, and meeting regulatory requirements. Still the essential reference tool, the New Edition helps you organize your safety efforts to adhere to the latest regulations and use the newest technology. Thoroughly revised, the CRC Handbook of Laboratory Safety, Fifth Edition includes new OSHA laboratory safety standards, the 1994 NRC radiation safety standards, guidelines for X-ray use in hospitals, enforcement of standards for dealing with blood-borne pathogens, OSHA actions covering hazardous waste operations and emergency response, and the latest CDC guidelines for research with microbial hazards. Every word on every page has been scrutinized, and literally hundreds of changes have been made to bring the material up to date. See what's new in the New Edition New figures and tables illustrating the new material Internet references in addition to journal articles Changes in the Clean Air Act regarding incineration of hospital, medical, and infectious waste Obsolete articles removed and replaced - over one hundred pages of new material New information on respiratory protection guidelines
Download or read book Safe Handling of Radioactive Isotopes written by National Committee on Radiation Protection (U.S.) and published by . This book was released on 1949 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Occupational Health and Safety in the Care and Use of Research Animals written by Committee on Occupational Safety and Health in Research Animal Facilities and published by National Academies Press. This book was released on 1997-06-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has been written about the care of research animals. Yet little guidance has appeared on protecting the health and safety of the people who care for or use these animals. This book, an implementation handbook and companion to Guide For the Care and Use of Laboratory Animals, identifies principles for building a program and discusses the accountability of institutional leaders, managers, and employees for a program's success. It provides a detailed description of risks-- physical and chemical hazards, allergens and zoonoses, and hazards from experiments--which will serve as a continuing reference for the laboratory. The book offers specific recommendations for controlling risk through administrative procedures, facility design, engineering controls, and periodic evaluations. The volume focuses on the worker, with detailed discussions of work practices, the use of personal protective gear, and the development of an emergency response plan. This handbook will be invaluable to administrators, researchers, and employees in any animal research facility. It will also be of interest to personnel in zoos, animal shelters, and veterinary facilities.
Download or read book Chemical Safety in the Laboratory written by Stephen K. Hall and published by CRC Press. This book was released on 2018-12-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing is more important to an organization than the health and safety of its workers. The managerial effectiveness of any health and safety program is judged on the basis of how well it prevents injuries and ill health. Chemical Safety in the Laboratory provides a proven approach to implementing and maintaining an effective chemical safety program for laboratories in hospital, industrial, and educational settings. Based on 20 years of experience managing and auditing chemical safety programs, the author discusses the OSHA Laboratory Standard and the Chemical Hygiene Plan, provides guidelines for the effective use of personal protective equipment, and details chemical emergency planning and response procedures. He also outlines a 19-step decontamination procedure for emergency responders. Employee chemical exposure monitoring and victim handling procedures are among the other major topics covered in this essential guide.
Download or read book Complete Guide to Laboratory Safety written by Dan Scungio and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terry Jo Gile (the Safety Lady) and Dan Scungio have completely updated this trusted lab safety training and compliance resource for 2014. The Complete Guide to Laboratory Safety, Fourth Edition, consolidates regulations from all relevant agencies, including OSHA, The Joint Commission, CAP, CLSI, DOT, and state health departments. This proven guide offers customizable policies, procedures, and checklists to develop and update a compliance program and avoid costly fines. The Complete Guide to Laboratory Safety will help you: - Create and update your policies and procedures with fully customizable templates - Build a culture of safety with checklists and tools related to topics including waste management, specimen transportation, chemical hygiene, and ergonomics in the lab setting - Keep up to date with regulations from OSHA, The Joint Commission, - CAP, CLSI, DOT, and state regulators - Employ best practices to avoid worker injury and costly citations What's New? - This edition is updated with all relevant regulations, including the new American National Standards Institute (ANSI) guidelines for fire safety and the revised International Air Transportation Association (IATA) requirements - New case studies are featured in each chapter.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.
Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...this substantial and engaging text offers a wealth of practical (in every sense of the word) advice...Every undergraduate laboratory, and, ideally, every undergraduate chemist, should have a copy of what is by some distance the best book I have seen on safety in the undergraduate laboratory." Chemistry World, March 2011 Laboratory Safety for Chemistry Students is uniquely designed to accompany students throughout their four-year undergraduate education and beyond, progressively teaching them the skills and knowledge they need to learn their science and stay safe while working in any lab. This new principles-based approach treats lab safety as a distinct, essential discipline of chemistry, enabling you to instill and sustain a culture of safety among students. As students progress through the text, they’ll learn about laboratory and chemical hazards, about routes of exposure, about ways to manage these hazards, and about handling common laboratory emergencies. Most importantly, they’ll learn that it is very possible to safely use hazardous chemicals in the laboratory by applying safety principles that prevent and minimize exposures. Continuously Reinforces and Builds Safety Knowledge and Safety Culture Each of the book’s eight chapters is organized into three tiers of sections, with a variety of topics suited to beginning, intermediate, and advanced course levels. This enables your students to gather relevant safety information as they advance in their lab work. In some cases, individual topics are presented more than once, progressively building knowledge with new information that’s appropriate at different levels. A Better, Easier Way to Teach and Learn Lab Safety We all know that safety is of the utmost importance; however, instructors continue to struggle with finding ways to incorporate safety into their curricula. Laboratory Safety for Chemistry Students is the ideal solution: Each section can be treated as a pre-lab assignment, enabling you to easily incorporate lab safety into all your lab courses without building in additional teaching time. Sections begin with a preview, a quote, and a brief description of a laboratory incident that illustrates the importance of the topic. References at the end of each section guide your students to the latest print and web resources. Students will also find “Chemical Connections” that illustrate how chemical principles apply to laboratory safety and “Special Topics” that amplify certain sections by exploring additional, relevant safety issues. Visit the companion site at http://userpages.wittenberg.edu/dfinster/LSCS/.
Download or read book Promoting Chemical Laboratory Safety and Security in Developing Countries written by National Research Council and published by National Academies Press. This book was released on 2010-09-07 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is growing concern about the possible use of toxic industrial chemicals or other hazardous chemicals by those seeking to perpetrate acts of terrorism. The U.S. Chemical Security Engagement Program (CSP), funded by the U.S. Department of State and run by Sandia National Laboratories, seeks to develop and facilitate cooperative international activities that promote best practices in chemical security and safe management of toxic chemicals, including: Partnering with host governments, chemical professionals, and industry to assess and fill gaps in chemical security abroad. Providing technical expertise and training to improve best practices in security and safety among chemical professionals and industry. Increasing transparency and accountability for dangerous chemical materials, expertise, and technologies. Providing opportunities for collaboration with the international professional chemical community. The Department of State called on the National Academies to assist in the CSP's efforts to promote chemical safety and security in developing countries.
Download or read book Selecting Evaluating and Using Sharps Disposal Containers written by and published by . This book was released on 1998 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Health and Safety Guidelines for the Laboratory written by Lynn Montgomery and published by . This book was released on 1995 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Safety CSMLS Guidelines written by Gene Shematek and published by . This book was released on 2017 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Biosafety Manual written by World Health Organization and published by . This book was released on 1983 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safe Work Practices for the Environmental Laboratory written by Frank R. Spellman and published by CRC Press. This book was released on 1998-10-02 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make your environmental lab--and lab technicians' work practices--the safest possible. * Protect workers from hazardous material they handle on-site * Protect the civilian population from harm in a hazardous materials emergency * Prevent accidents before they happen The purpose of Safe Work Practices for the Environmental Laboratory is twofold: 1. For the person designated as the laboratory's Chemical Hygiene Officer or Safety Officer, this text is a user friendly reference that will provide a format, a template, a guide to compliance with OSHA's Laboratory Standard (29 CFR 1910.145); and 2. for the person who is assigned to work in the environmental laboratory, this user-friendly text provides the information needed not only to perform routine laboratory tasks correctly, but also to perform them safely. The environmental lab is involved with performing analytical testing and sampling protocols relating to air, soil, biosolids, sludges, drinking water, wastewater, groundwater, stormwater, waste characterization, petroleum products, and HRSD/NPDES effluent studies. Many wastewater treatment plants and water works have their own environmental laboratories. These labs primarily perform analysis of process conditions to ensure optimization of the process. However, even these small labs (a few are quite large) perform "environmental sampling" and therefore are environmental labs. The actual genesis of the environmental laboratory can be attributed to the environmental regulations that have been generated by USEPA, AOAC, ASTM, NIOSH, OSHA, and other regulatory and advisory entities. The typical environmental laboratory contains several different types of hazards the lab worker must guard against. This is the case even though modern environmental laboratories have been designed to take maximum advantage of engineering controls that work to "engineer-out" most hazards. The main hazard discussed in this text has to do with hazardous materials--dangerous chemicals and compounds--and the effect they can have on work practices. OSHA is quite specific in regard to protecting the laboratory worker from harm that could result from handling hazardous materials--these specifics are discussed in detail throughout this text. It is important to point out that this text will provide the user with more than just a "safety book." For example, this text provides the user with a sample Chemical Hygiene Plan, it discusses various safe work practices for standard operating procedures normally performed in the environmental laboratory, and it discusses procedures to use for emergency response activities, such as clean-up of chemical spills. The bottom line is that probably the most important benefit to be derived from using this text is the exposure the user receives to the lessons and examples presented throughout the text; these lessons learned and examples provide information on how to make your environmental laboratory and the performance of your individual work practices safer. When you get right down to it, isn't this what a safety text should be all about?
