Download or read book Supermagnets Hard Magnetic Materials written by G.J Long and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book you are now holding represents the final step in a long process for the editors and organizers of the Advanced Study Institute on hard magnetic materials. The editors interest in hard magnetic materials began in 1985 with an attempt to better understand the moments associated with the different iron sites in Nd Fe B. These 14 moments can be obtained from neutron diffraction studies, but we qUickly realized that iron-57 Mossbauer spectroscopy should lead to a better determination of these moments. However, it was also realized that the complex Mossbauer spectra obtained for these hard magnetic materials could not be easily understood without a broad knowledge of their various structural, electronic, and magnetic properties. Hence it seemed useful to the editors to bring together scientists and engineers to discuss, in a tutorial setting, the various properties of these and future hard magnetic materials. We believe the inclusion of engineers as well as scientists in these discussions was essential because the design of new magnetic materials depends very much upon the mode in which they are used in practical devices.

Download or read book Hard Magnetic Alloys written by and published by Springer. This book was released on 1992-12-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Download or read book Hard Magnetic Alloys written by and published by Springer. This book was released on 1992-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Download or read book Hard Magnetic Alloys written by and published by Springer. This book was released on 1992-12-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Download or read book Hard Magnetic Alloys written by and published by Springer. This book was released on 1992-12-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Download or read book Novel Functional Magnetic Materials written by Arcady Zhukov and published by Springer. This book was released on 2016-03-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research on advanced magnetic materials and multifunctional composites. Recent advances in technology and engineering have resulted from the development of advanced magnetic materials with improved functional magnetic and magneto-transport properties. Certain industrial sectors, such as magnetic sensors, microelectronics, and security, demand cost-effective materials with reduced dimensionality and desirable magnetic properties such as enhanced magnetic softness, giant magnetic field sensitivity, and large magnetocaloric effect. Expert chapters present the most up-to-date information on the fabrication process, processing, tailoring of properties, and applications of different families of modern functional materials for advanced smart applications. Topics covered include novel magnetic materials and applications; amorphous and nanocrystalline magnetic materials and applications; hard magnetic materials; magnetic shape memory alloys; and magnetic oxides. The book's highly interdisciplinary and forward-looking approach will benefit the scientific community, particularly researchers and advanced graduate students working in the field of advanced magnetic materials, composites, and high-performance sensor and microwave devices.

Download or read book Hard Magnetic Alloys written by and published by Springer. This book was released on 1992-12-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Download or read book Frontiers in Magnetic Materials written by Chen Wu and published by CRC Press. This book was released on 2022-08-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book aims to provide comprehensive and practical guidance on magnetism and magnetic materials. It involves four parts, focusing on fundamental magnetism, hard magnetic materials, soft magnetic materials and other functional magnetic materials. Part I highlights the ubiquity of magnetism and the close relationships between magnetic materials and our daily life. Perspectives on magnetism from Engineering and Physics are provided to introduce the two unit systems, followed by the origin and categories of magnetisms. An introduction of important parameters during magnetization and magnetic measurement techniques are then provided to lay a solid foundation for the readers for better understandings of the design and development of different magnetic materials. Important magnetic materials are then introduced in the subsequent parts, delivering an overview of design principles, production technologies, research developments and real-world applications. For instance, rare-earth-free and rare-earth-based hard magnetic materials as well as soft magnetic materials such as Fe-based alloys, composites and ferrites are discussed. Other functional magnetic materials span a wide range, involving smart materials with magneto-X effects, together with magnetic materials for applications including electromagnetic wave absorption, biomedicine and catalysis, etc. For these magnetic materials, more emphasis is placed on the latest advances and interdisciplinary perspectives.

Download or read book Handbook of Advanced Magnetic Materials written by Yi Liu and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 1844 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 2002, the world's first commercial magnetic levitation super-train went into operation in Shanghai. The train is held just above the rails by magnetic levitation (maglev) and can travel at a speed of 400 km/hr, completing the 30km journey from the city to the airport in minutes. Now consumers are enjoying 50 GB hard drives compared to 0.5 GB hard drives ten years ago. Achievements in magnetic materials research have made dreams of a few decades ago reality. The objective of the four volume reference, Handbook of Advanced Magnetic Materials, is to provide a comprehensive review of recent progress in magnetic materials research. Each chapter will have an introduction to give a clear definition of basic and important concepts of the topic. The details of the topic are then elucidated theoretically and experimentally. New ideas for further advancement are then discussed. Sufficient references are also included for those who wish to read the original work. In the last decade, one of the most significant thrust areas of materials research has been nanostructured magnetic materials. There are several critical sizes that control the behavior of a magnetic material, and size effects become especially critical when dimensions approach a few nanometers, where quantum phenomena appear. The first volume of the book, Nanostructured Advanced Magnetic Materials, has therefore been devoted to the recent development of nanostructured magnetic materials, emphasizing size effects. Our understanding of magnetism has advanced with the establishment of the theory of atomic magnetic moments and itinerant magnetism. Simulation is a powerful tool for exploration and explanation of properties of various magnetic materials. Simulation also provides insight for further development of new materials. Naturally, before any simulation can be started, a model must be constructed. This requires that the material be well characterized. Therefore the second volume, Characterization and Simulation provides a comprehensive review of both experimental methods and simulation techniques for the characterization of magnetic materials. After an introduction, each section gives a detailed description of the method and the following sections provide examples and results of the method. Finally further development of the method will be discussed. The success of each type of magnetic material depends on its properties and cost which are directly related to its fabrication process. Processing of a material can be critical for development of artificial materials such as multilayer films, clusters, etc. Moreover, cost-effective processing usually determines whether a material can be commercialized. In recent years processing of materials has continuously evolved from improvement of traditional methods to more sophisticated and novel methods. The objective of the third volume, Processing of Advanced Magnetic Materials, is to provide a comprehensive review of recent developments in processing of advanced magnetic materials. Each chapter will have an introduction and a section to provide a detailed description of the processing method. The following sections give detailed descriptions of the processing, properties and applications of the relevant materials. Finally the potential and limitation of the processing method will be discussed. The properties of a magnetic material can be characterized by intrinsic properties such as anisotropy, saturation magnetization and extrinsic properties such as coercivity. The properties of a magnetic material can be affected by its chemical composition and processing route. With the continuous search for new materials and invention of new processing routes, magnetic properties of materials cover a wide spectrum of soft magnetic materials, hard magnetic materials, recording materials, sensor materials and others. The objective of the fourth volume, Properties and Applications of Advanced Magnetic Materials, is to provide a comprehensive review of recent development of various magnetic materials and their applications. Each chapter will have an introduction of the materials and the principles of their applications. The following sections give a detailed description of the processing, properties and applications. Finally the potential and limitation of the materials will be discussed.

Download or read book Alloy Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.

Download or read book Magnetic Properties of Metals and Alloys written by American Society for Metals and published by . This book was released on 1959 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetic Material for Motor Drive Systems written by Keisuke Fujisaki and published by Springer Nature. This book was released on 2019-11-29 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on how to use magnetic material usefully for electrical motor drive system, especially electrical vehicles and power electronics. The contents have been selected in such a way that engineers in other fields might find some of the ideas difficult to grasp, but they can easily acquire a general or basic understanding of related concepts if they acquire even a rudimentary understanding of the selected contents.The cutting-edge technologies of magnetism are also explained. From the fundamental theory of magnetism to material, equipment, and applications, readers can understand the underlying concepts. Therefore, a new electric vehicle from the point of view of magnetic materials or a new magnetic material from the point of a view of electric vehicles can be envisioned: that is, magnetic material for motor drive systems based on fusion technology of an electromagnetic field. Magnetic material alone does not make up an electric vehicle, of course. Other components such as mechanical structure material, semiconductors, fuel cells, and electrically conductive material are important, and they are difficult to achieve. However, magnetic material involves one of the most important key technologies, and there are high expectations for its use in the future. It will be the future standard for motor-drive system researchers and of magneticmaterial researchers as well. This book is a first step in that direction.

Download or read book Magnetic Properties of Metals Magnetische Eigenschaften Von Metallen Condensed Matter written by D. Bonnenberg and published by . This book was released on 1992 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetism written by E. Trémolet de Lacheisserie and published by Springer Science & Business Media. This book was released on 2005 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats permanent magnet (hard) materials, magnetically soft materials for low-frequency applications and for high-frequency electronics, magnetostrictive materials, superconductors, magnetic-thin films and multilayers, and ferrofluids. Chapters are dedicated to magnetic recording, the role of magnetism in magnetic resonance imaging (MRI), and instrumentation for magnetic measurements.

Download or read book 21 1 written by David J. Sellmyer and published by 清华大学出版社有限公司. This book was released on 2005 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: 本书共分四卷,第一卷集中论述一个具体的研究领域。每一章首先对该章的基本概念和重要观念进行阐述,然后从实验和理论方面进行详细的说明,最后介绍该领域的发展前景以及新的思想。

Download or read book Hard Magnetic Alloys written by and published by Springer. This book was released on 1992-12-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.