Download or read book The Handbook of Hard Chromium Plating written by Robert K. Guffie and published by Hanser Gardner Publications. This book was released on 1986-01-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposition of Chromium from Chromic Acid Solutions written by George Dubpernell and published by Elsevier. This book was released on 2013-10-22 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrodeposition of Chromium from Chromic Acid Solutions focuses on the behavior of catalysts used in the electrodeposition of chromium from chromic acid solutions, particularly noting the characteristics, compositions, reactions, and applications of chromium. The book first offers information on the discovery of chromium by Nicolas-Louis Vauquelin, taking into consideration the experiments that he conducted to identify this metal. The manuscript then surveys the economic value of chromium deposition. Particularly given importance are the non-galling and wear resistant characteristics of chromium, enabling it to become a primary component in modern machines. The text describes the common forms of deposited chromium and catalyst balance. The differing electrochemical behaviors of cold chromium and bright chromium are discussed. The manuscript also presents information on empirical tests for catalyst concentration and bath balance and fluoride and complex fluoride catalyzed baths. The book is a vital source of data for readers wanting to explore electrodeposition of chromium from chromic acid solutions.
Download or read book Hard Chromium Plating written by John David Greenwood and published by . This book was released on 1981 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel and Chromium Plating written by J. K. Dennis and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel and Chromium Plating, Second Edition, does not merely update the first edition but also places additional emphasis on certain methods that have achieved increased industrial use in the 14 years since the first edition was published. The book begins by tracing the history of nickel and chromium plating. This is followed by a discussion of the electrochemistry of electrodeposition from aqueous electrolyte solutions. Separate chapters cover topics such as autocatalytic (electroless) nickel deposition; nickel plating onto aluminum and other difficult substrates; plating onto plastics and high-speed plating; the deposition of various nickel alloys for decorative and functional applications; composite coatings; and tampon (brush) plating. This book will be helpful to those new to the plating industry; those experienced in the industry will find that this revised version enables them to keep up-to-date with the latest developments in this specialized technology.
Download or read book Hard Chromium Plating written by and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hard Chrome Fume Suppressants and Control Technologies written by and published by . This book was released on 1998 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Graham s Electroplating Engineering Handbook written by L.J. Durney and published by Springer Science & Business Media. This book was released on 1984-11-30 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an instructor in various finishing courses, I have frequently made the statement over the years that "In the field of metal finishing there is very little black and white, just a great deal of grey. It is the purpose of the instructor to familiarize the student with the beacons that will guide him through this fog. " To a very considerable extent, a handbook such as this serves a similar purpose. It is also subject to similar limitations. Providing all the required information would result in a multi-volume encyclopedia rather than a usable handbook. In the pages that follow, you will therefore find frequent references to other sources where more detailed explanations or information can be found. The present goal is proper guidance and the provision ofthe most frequently required facts, not everything that is available. In the 13 years since the last edition, changes in the finishing industry have been profound but in one sense have resulted in simplifying matters rather than complicating them. Because technology has advanced to a level of complexity rendering "home brew" impracti cal in many cases, dependence on proprietary compounds has become common. Therefore, detailed solution compositions are often no longer significant or even practical. It is thus more important to provide instruction about the factors that affect the choice of the most suitable type of proprietary material.
Download or read book Chromium Plating written by Edward Samuel Richards and published by . This book was released on 1950 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trouble in Your Tank written by Lawrence J. Durney and published by . This book was released on 1983 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chromium Plating written by Robert Weiner and published by Hyperion Books. This book was released on 1980 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposition of Chromium from Chromic Acid Baths written by Horace E. Haring and published by . This book was released on 1927 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Protection and Control Using Nanomaterials written by V S Saji and published by Elsevier. This book was released on 2012-02-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is an expensive and potentially dangerous problem in many industries. The potential application of different nanostructured materials in corrosion protection, prevention and control is a subject of increasing interest. Corrosion protection and control using nanomaterials explores the potential use of nanotechnology in corrosion control.The book is divided into two parts. Part one looks at the fundamentals of corrosion behaviour and the manufacture of nanocrystalline materials. Chapters discuss the impact of nanotechnology in reducing corrosion cost, and investigate the influence of various factors including thermodynamics, kinetics and grain size on the corrosion behaviour of nanocrystalline materials. There are also chapters on electrodeposition and the corrosion behaviour of electrodeposited nanocrystalline materials. Part two provides a series of case studies of applications of nanomaterials in corrosion control. Chapters review oxidation protection using nanocrystalline structures at various temperatures, sol- gel and self-healing nanocoatings and the use of nanoreservoirs and polymer nanocomposites in corrosion control.With its distinguished editors and international team of expert contributors, Corrosion protection and control using nanomaterials is an invaluable reference tool for researchers and engineers working with nanomaterials in a variety of industries including, aerospace, automotive and chemical engineering as well as academics studying the unique protection and control offered by nanomaterials against corrosion. Explores the potential use of nanotechnology and nanomaterials for corrosion prevention, protection and control Discusses the impact of nanotechnology in reducing corrosion cost and investigates various factors on the corrosion behaviour of nanocrystalline materials Provides a series of case studies and applications of nanomaterials for corrosion control
Download or read book Introduction to Surface Engineering written by P. A. Dearnley and published by Cambridge University Press. This book was released on 2017-01-16 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.
Download or read book Advances in Materials Processing written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-06-22 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Functional Material, Manufacturing and Performances (ICFMMP) 2019. The book primarily covers recent research, theories, and practices relevant to surface engineering and processing of materials. It focuses on the lesser-known technologies and advanced manufacturing methods which may not be standardized yet but are highly beneficial to material and manufacturing industrial engineers. The book includes current advances in the field of coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies which enhance the performance of materials in terms of corrosion, wear and fatigue. The book can be a valuable reference for beginners, researchers, and professionals interested in materials processing and allied fields.
Download or read book Thermochemical Surface Engineering of Steels Improving Materials Performance written by Eric J. Mittemeijer and published by Woodhead Publishing. This book was released on 2017-11-13 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermochemical surface engineering significantly improves the properties of steels. Edited by two of the world s leading authorities, this important book summarises the range of techniques and their applications. It covers nitriding, nitrocarburizing and carburizing. There are also chapters on low temperature techniques as well as boriding, sheradizing, aluminizing, chromizing, thermo-reactive deposition and diffusion. Reviews the fundamentals of surface treatments and current performance of improved materialsCovers nitriding, nitrocarburizing and carburizing of iron and iron carbon alloysExamines how different thermochemical surface engineering methods can help against corrosion"
Download or read book The Cold Spray Materials Deposition Process written by and published by Elsevier. This book was released on 2007-09-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems
Download or read book Proceedings of the 12th International Conference on Measurement and Quality Control Cyber Physical Issue written by Vidosav D. Majstorovic and published by Springer. This book was released on 2019-05-03 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 12th International Conference on Measurement and Quality Control – Cyber Physical Issues (IMEKO TC 14 2019), held in Belgrade, Serbia, on 4–7 June 2019. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of measurement of geometrical quantities. The book addresses a wide range of topics, including: 3D measurement of GPS characteristics, measurement of gears and threads, measurement of roughness, micro- and nano-metrology, laser metrology for precision measurements, cyber physical metrology, optical measurement techniques, industrial computed tomography, multisensor techniques, intelligent measurement systems, evaluating measurement uncertainty, dimensional management in industry, product quality assurance methods, and big data analytics. By providing updates on key issues and highlighting recent advances in measurement and quality control, the book supports the transfer of vital knowledge to the next generation of academics and practitioners.
