Download or read book Handbook on Face Gear Drives with a Spur Involute Pinion written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-13 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of face gears in power transmission and drive systems has a significant number of benefits. Face gears allow a variety of new transmission arrangements as well as high reduction ratio capability. This leads to drive system weight reduction and improvements in performance. In this work, basic information about the design and analysis of face gear drives is presented. The work considers face gears in mesh with spur involute pinions for both intersecting axes and offset drives. Tooth geometry, kinematics, generation of face gears with localized bearing contact by cutting and grinding, avoidance of tooth undercutting, avoidance of tooth pointing, tooth contact analysis, and algorithms for the simulation of meshing and contact arc all topics which are discussed. In addition, applications of face gear drives are presented. Included are design uses in aerospace applications such as helicopter transmissions, split-torque face gear arrangements, comparisons of face gears with bevel gears, and general design considerations. Litvin, F. L. and Egelja, A. and Tan, J. and Chen, D. Y.-D. and Heath, G. Glenn Research Center NCC3-356; RTOP 581-30-13; DA Proj. 1L1-62211-A4-7A
Download or read book Handbook on Face Gear Drives with a Spur Involute Pinion written by Faydor L. Litvin and published by . This book was released on 2000 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of face gears in power transmission and drive systems has a significant number of benefits. Face gears allow a variety of new transmission arrangements as well as high reduction ratio capability. This leads to drive system weight reduction and improvements in performance. In this work, basic information about the design and analysis of face gear drives is presented. The work considers face gears in mesh with spur involute pinions for both intersecting axes and offset drives. Tooth geometry, kinematics, generation of face gears with localized bearing contact by cutting and grinding, avoidance of tooth undercutting, avoidance of tooth pointing, tooth contact analysis, and algorithms for the simulation of meshing and contact are all topics which are discussed. In addition, applications of face gear drives are presented. Included are design uses in aerospace applications such as helicopter transmissions, split-torque face gear arrangements, comparisons of face gears with bevel gears, and general design considerations.
Download or read book Face Gear Drive with Spur Involute Pinion Geometry Generation by a Worm Stress Analysis written by and published by . This book was released on 2002 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A face gear drive with a spur involute pinion is considered. The generation of the face gear is based on application of a grinding or cutting worm whereas the conventional method of generation is based on application of an involute shaper. An analytical approach for determination of: (1) the worm thread surface, (2) avoidance of singularities of the worm thread surface, (3) dressing of the worm, and (4) determination of stresses of the face-gear drive, is proposed. A computer program for simulation of meshing and contact of the pinion and face-gear has been developed. Correction of machine-tool settings is proposed for reduction of the shift of the bearing contact caused by misalignment. An automatic development of the model of five contacting teeth has been proposed for stress analysis. Numerical examples for illustration of the developed theory are provided.
Download or read book Dudley s Handbook of Practical Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2021-08-24 with total page 1171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date, single-source reference for all aspects of the gear industry Presents an integrated approach to gear design and manufacture Includes new coverage of direct gear design and ready-to-use gear design Contains coverage of finite element analysis, gear vibration, load ratings, and gear failures
Download or read book Face gear Drives Design Analysis and Testing for Helicopter Transmission Applications written by and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dudley s Handbook of Practical Gear Design and Manufacture Second Edition written by Stephen P. Radzevich and published by CRC Press. This book was released on 2012-04-02 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, single source reference for all aspects of gears, Dudley's Handbook of Practical Gear Design and Manufacture, Second Edition provides comprehensive and consistent information on the design and manufacture of gears for the expert and novice alike. The second edition of this industry standard boasts seven new chapters and appendices as well as a wealth of updates throughout. New chapters and expanded topics include: Gear Types and Nomenclature, Gear Tooth Design, Gear Reactions and Mountings, Gear Vibration, The Evolution of the Gear Art, Novikov Gearing and the Inadequacy of the Term, and thoroughly referenced Numerical Data Tables. Features: Offers a single-source reference for all aspects of the gear industry Presents a comprehensive and self-consistent collection of knowledge, practical methods, and numerical tables Discusses optimal design and manufacture of gears of all known designs for the needs of all industries Explains concepts in accessible language and with a logical organization, making it simple to use even by beginners in the field Provides adequate recommendations for gear practitioners in all areas of gear design, production, inspection, and application Includes practical examples of successful use of tools covered in the Handbook Logically organized and easily understood, the Handbook requires only a limited knowledge of mathematics for adequate application to almost any situation or question. Whether you are a high-volume gear manufacturer or a relatively small factory, the Handbook and some basic common sense can direct the sophisticated design of any type of gear, from the selection of appropriate material, production of gear blanks, cutting gear teeth, advanced methods of heat treatment, and gear inspection. No other sources of information are necessary for the gear designer or manufacturer once they have the Handbook.
Download or read book Theory and Practice of Gearing and Transmissions written by Veniamin Goldfarb and published by Springer. This book was released on 2015-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing. Furthermore, this volume honours the work of Faydor L. Litvin on the 100th anniversary of this birth. He is acknowledged as the founder of the modern theory of gearing. An exhaustive list of his contributions and achievements and a biography are included.
Download or read book Design Generation and Tooth Contact Analysis TCA of Asymmetric Face Gear Drive With Modified Geometry written by and published by . This book was released on 2001 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new type of face gear drive for application in transmissions, particularly in helicopters, has been developed. The new geometty differs from the existing geometry by application of asymmetric profiles and double-crowned pinion of the face gear mesh. The paper describes the computerized design, simulation of meshing and contact, and stress analysis by finite element method. Special purpose computer codes have been developed to conduct the analysis. The analysis of this new type of face gear is illustrated with a numerical example.
Download or read book Handbook of Gear Design written by Gitin M. Maitra and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition provides extensive information to designers on various aspects of gears and gearing systems. Very comprehensive in its coverage, the handbook contains enough tables, illustrative examples and diagrams to enable designers arrive at quick solutions for their problems. The handbook is based on ISO specifications and is a unique blend of practical as well as the theoretical aspects of gear designs. The new edition includes more on spiral bevel gears, arcoid gears, klingelnberg, and gleason systems and gear tooth checking.
Download or read book Advances in Power Transmission Science and Technology written by Ze Yong Yin and published by Trans Tech Publications Ltd. This book was released on 2011-08-16 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Conference on Power Transmission (ICPT 2011), October 25-29, 2011, Xi’an, China
Download or read book Handbook of the Six ton Special Tractor Model 1917 written by United States. Army. Ordnance Department and published by . This book was released on 1918 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded edition covers the theory, design, geometry, and manufacture of all types of gears and gear drives. An invaluable reference for designers, theoreticians, students, and manufacturers, the second edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: new geometry for gears and pumps; new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis; new methods of grinding and gear shaving; and new theory on the simulation and its application. First Edition published by Pearson Education Hb (1994): 0-132-11095-4
Download or read book Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis 2006 Fatigue and fracture Heat transfer Internal combustion engines Manufacturing Technology and society written by and published by . This book was released on 2006 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded, edition covers the theory, design, geometry and manufacture of all types of gears and gear drives. This is an invaluable reference for designers, theoreticians, students, and manufacturers. This edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: 1. New geometry for modified spur and helical gears, face-gear drives, and cycloidal pumps. 2. New design approaches for one stage planetary gear trains and spiral bevel gear drives. 3. An enhanced approach for stress analysis of gear drives with FEM. 4. New methods of grinding face gear drives, generating double crowned pinions, and improved helical gear shaving. 5. Broad application of simulation of meshing and TCA. 6. New theories on the simulation of meshing for multi-body systems, detection of cases wherein the contact line on generating surfaces may have its own envelope, and detection and avoidance of singularities of generated surfaces.
Download or read book Dudley s Gear Handbook written by Darle W. Dudley and published by Tata McGraw-Hill Education. This book was released on 1991 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2000-07 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-01-24 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as: straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. Includes fully-developed exercises to draw the reader's attention to the problems that are of interest to the designer, as well as to clarify the calculation procedure Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears
