Download or read book Handbook of Simulation of Industrial Processes for Control Engineers written by Qingwei Meng and published by . This book was released on 2016-04 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation of Industrial Processes for Control Engineers written by Philip J Thomas and published by Elsevier. This book was released on 1999-07-13 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation is the key to comprehending and controlling the full-scale industrial plant used in the chemical, oil, gas and electrical power industries. Simulation of Industrial Processes for Control Engineers shows how to use the laws of physics and chemistry to produce the equations to simulate dynamically all the most important unit operations found in process and power plant.The book explains how to model chemical reactors, nuclear reactors, distillation columns, boilers, deaerators, refrigeration vessels, storage vessels for liquids and gases, liquid and gas flow through pipes and pipe networks, liquid and gas flow through installed control valves, control valve dynamics (including nonlinear effects such as static friction), oil and gas pipelines, heat exchangers, steam and gas turbines, compressors and pumps, as well as process controllers (including three methods of integral desaturation). The phenomenon of markedly different time responses ("stiffness") is considered and various ways are presented to get around the potential problem of slow execution time. The book demonstrates how linearization may be used to give a diverse check on the correctness of the as-programmed model and explains how formal techniques of model validation may be used to produce a quantitative check on the simulation model's overall validity.The material is based on many years' experience of modelling and simulation in the chemical and power industries, supplemented in recent years by university teaching at the undergraduate and postgraduate level. Several important new results are presented. The depth is sufficient to allow real industrial problems to be solved, thus making the book attractive to engineers working in industry. But the book's step-by-step approach makes the text appropriate also for post-graduate students of control engineering and for undergraduate students in electrical, mechanical and chemical engineering who are studying process control in their second year or later.

Download or read book Process Modeling Simulation and Control for Chemical Engineers written by William L. Luyben and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1990 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to convey to undergraduate students an understanding of those areas of process control that all chemical engineers need to know. The presentation is concise, readable and restricted to only essential elements. The methods presented have been successfully applied in industry to solve real problems. Analysis of closedloop dynamics in the time, Laplace, frequency and sample-data domains are covered. Designing simple regulatory control systems for multivariable processes is discussed. The practical aspects of process control are presented sizing control valves, tuning controllers, developing control structures and considering interaction between plant design and control. Practical simple identification methods are covered.

Download or read book Advanced Process Control and Simulation for Chemical Engineers written by Hossein Ghanadzadeh Gilani and published by CRC Press. This book was released on 2013-02-19 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern view of process control in the context of today’s technology. It provides innovative chapters on the growth of educational, scientific, and industrial research among chemical engineers. It presents experimental data on thermodynamics and provides a broad understanding of the main computational techniques used for chemical processing. Readers will gain an understanding of the areas of process control that all chemical engineers need to know. The information is presented in a concise and readable format. The information covers the basics and also provides unique topics, such as using a unified approach to model representations, statistical quality control, and model-based control. The methods presented have been successfully applied in industry to solve real problems. Designed as an advanced research guide in process dynamics and control, the book will be useful in chemical engineering courses as well as for the teaching of mechanical, nuclear, industrial, and metallurgical engineering.

Download or read book Modeling and Simulation in Chemical Engineering written by Christo Boyadjiev and published by Springer Nature. This book was released on 2021-12-08 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical analysis of the modern methods used for modeling various chemical engineering processes. Currently, the two primary problems in the chemical industry are the optimal design of new devices and the optimal control of active processes. Both of these problems are often solved by developing new methods of modeling. These methods for modeling specific processes may be different, but in all cases, they bring the mathematical description closer to the real processes by using appropriate experimental data. In this book, the authors detail a new approach for the modeling of chemical processes in column apparatuses. Further, they describe the types of neural networks that have been shown to be effective in solving important chemical engineering problems. Readers are also presented with mathematical models of integrated bioethanol supply chains (IBSC) that achieve improved economic and environmental sustainability. The integration of energy and mass processes is one of the most powerful tools for creating sustainable and energy efficient production systems. This book defines the main approaches for the thermal integration of periodic processes, direct and indirect, and the recent integration of small-scale solar thermal dryers with phase change materials as energy accumulators. An exciting overview of new approaches for the modeling of chemical engineering processes, this book serves as a guide for the important innovations being made in theoretical chemical engineering.

Download or read book Chemical Engineering Process Simulation written by Dominic Foo and published by Elsevier. This book was released on 2022-09-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Process Simulation, Second Edition guides users through chemical processes and unit operations using the main simulation software used in the industrial sector. The book helps predict the characteristics of a process using mathematical models and computer-aided process simulation tools, as well as how to model and simulate process performance before detailed process design takes place. Content coverage includes steady-state and dynamic simulation, process design, control and optimization. In addition, readers will learn about the simulation of natural gas, biochemical, wastewater treatment and batch processes. - Provides an updated and expanded new edition that contains 60-70% new content - Guides readers through chemical processes and unit operations using the primary simulation software used in the industrial sector - Covers the fundamentals of process simulation, theory and advanced applications - Includes case studies of various difficulty levels for practice and for applying developed skills - Features step-by-step guides to using UniSim Design, SuperPro Designer, Symmetry, Aspen HYSYS and Aspen Plus for process simulation novices

Download or read book Advanced Process Control and Simulation for Chemical Engineers written by Hossein Gilani and published by . This book was released on 2016 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern view of process control in the context of today's technology. It provides innovative chapters on the growth of educational, scientific, and industrial research among chemical engineers. It presents experimental data on thermodynamics and provides a broad understanding of the main computational techniques used for chemical processing. Readers will gain an understanding of the areas of process control that all chemical engineers need to know. The information is presented in a concise and readable format. The information covers the basics and also provides unique topics, such as using a unified approach to model representations, statistical quality control, and model-based control. The methods presented have been successfully applied in industry to solve real problems. Designed as an advanced research guide in process dynamics and control, the book will be useful in chemical engineering courses as well as for the teaching of mechanical, nuclear, industrial, and metallurgical engineering.

Download or read book Chemical Engineering Process Simulation written by Nishanth G. Chemmangattuvalappil and published by Elsevier. This book was released on 2017-07-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Process Simulation is ideal for students, early career researchers, and practitioners, as it guides you through chemical processes and unit operations using the main simulation softwares that are used in the industrial sector. This book will help you predict the characteristics of a process using mathematical models and computer-aided process simulation tools, as well as model and simulate process performance before detailed process design takes place. Content coverage includes steady and dynamic simulations, the similarities and differences between process simulators, an introduction to operating units, and convergence tips and tricks. You will also learn about the use of simulation for risk studies to enhance process resilience, fault finding in abnormal situations, and for training operators to control the process in difficult situations. This experienced author team combines industry knowledge with effective teaching methods to make an accessible and clear comprehensive guide to process simulation. - Ideal for students, early career researchers, and practitioners, as it guides you through chemical processes and unit operations using the main simulation softwares that are used in the industrial sector - Covers the fundamentals of process simulation, theory, and advanced applications - Includes case studies of various difficulty levels to practice and apply the developed skills - Features step-by-step guides to using UniSim Design, PRO/II, ProMax, Aspen HYSYS for process simulation novices - Helps readers predict the characteristics of a process using mathematical models and computer-aided process simulation tools

Download or read book Model Based Control written by Paul Serban Agachi and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature for a practical approach to the topic, this book is unique in including a whole section of case studies presenting a wide range of applications from polymerization reactors and bioreactors, to distillation column and complex fluid catalytic cracking units. A section of general tuning guidelines of MPC is also present.These thus aid readers in facilitating the implementation of MPC in process engineering and automation. At the same time many theoretical, computational and implementation aspects of model-based control are explained, with a look at both linear and nonlinear model predictive control. Each chapter presents details related to the modeling of the process as well as the implementation of different model-based control approaches, and there is also a discussion of both the dynamic behaviour and the economics of industrial processes and plants. The book is unique in the broad coverage of different model based control strategies and in the variety of applications presented. A special merit of the book is in the included library of dynamic models of several industrially relevant processes, which can be used by both the industrial and academic community to study and implement advanced control strategies.

Download or read book Handbook of Research on Advanced Intelligent Control Engineering and Automation written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2014-11-30 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industrial engineering and manufacturing, control of individual processes and systems is crucial to developing a quality final product. Rapid developments in technology are pioneering new techniques of research in control and automation with multi-disciplinary applications in electrical, electronic, chemical, mechanical, aerospace, and instrumentation engineering. The Handbook of Research on Advanced Intelligent Control Engineering and Automation presents the latest research into intelligent control technologies with the goal of advancing knowledge and applications in various domains. This text will serve as a reference book for scientists, engineers, and researchers, as it features many applications of new computational and mathematical tools for solving complicated problems of mathematical modeling, simulation, and control.

Download or read book Process Control written by Myke King and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: So why another book on process control? Process Control: A Practical Approach is a ground-breaking guide that provides everything needed to design and maintain process control applications. The book follows the hierarchy from basic control, through advanced regulatory control, up to and including multivariable control. It addresses many process-specific applications including those on fired heaters, compressors and distillation columns. Written with the practicing control engineer in mind, the book: Brings together proven design methods, many of which have never been published before Focuses on techniques that have an immediate practical application Minimizes the use of daunting mathematics – but for the more demanding reader, complex mathematical derivations are included at the end of each chapter Covers the use of all the algorithms, common to most distributed control systems This book raises the standard of what might be expected of even basic controls. In addition to the design methods it describes any shortcuts that can be taken and how to avoid common pitfalls. Proper application will result in significant improvements to process performance. Myke King’s practical approach addresses the needs of the process industry, and will improve the working practices of many control engineers. “This book would be of value to process control engineers in any country.” – Mr Andrew Ogden-Swift, Chairmain, Process Management and Control Subject Group, Institution of Chemical Engineers, UK “This book should take the process-control world by storm.” – Edward Dilley, Lecturer in Process Control, ESD Simulation Training

Download or read book Handbook of Industrial Engineering written by Gavriel Salvendy and published by Wiley-Interscience. This book was released on 1992-01-02 with total page 2838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the entire spectrum of modern industrial engineering from a practical standpoint. This edition adds 36 completely new chapters to provide a more cohesive structure to the discipline which it classifies under the following four areas: technology; human dimensions; planning, design, and control of operations; and quantitative methods for decision making.

Download or read book Handbook of Simulation written by Jerry Banks and published by John Wiley & Sons. This book was released on 1998-09-14 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch ist eine unschätzbare Informationsquelle für alle Ingenieure, Designer, Manager und Techniker bei Entwicklung, Studium und Anwendung einer großen Vielzahl von Simulationstechniken. Es vereint die Arbeit internationaler Simulationsexperten aus Industrie und Forschung. Alle Aspekte der Simulation werden in diesem umfangreichen Nachschlagewerk abgedeckt. Der Leser wird vertraut gemacht mit den verschiedenen Techniken von Industriesimulationen sowie mit Einsatz, Anwendungen und Entwicklungen. Neueste Fortschritte wie z.B. objektorientierte Programmierung werden ebenso behandelt wie Richtlinien für den erfolgreichen Umgang mit simulationsgestützten Prozessen. Auch gibt es eine Liste mit den wichtigsten Vertriebs- und Zulieferadressen. (10/98)

Download or read book Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2008-08-12 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. Whether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources. - Helps engineers and researchers correctly and efficiently implement their projects - An indispensable guide and references for anyone involved in control, automation, computer networks and robotics - Equally suitable for industry and academia

Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by Wiley. This book was released on 2000-05-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on teaching and reference text for chemical engineers In writing this book the authors' have focused exclusively on the vast majority of chemical engineering students who need a basic understanding of practical process control for their industrial careers. Traditionally process control has been taught using non-intuitive and highly mathematical techniques (Laplace and frequency-domain techniques). Aside from being difficult to master in a one-semester course, the traditional approach is of limited use for more complex process control problems encountered in the chemical processing industries. When designing and analyzing multi-loop control systems today, industry practitioners employ both steady-state and dynamic simulation-based methodologies. These 'real time' methods have now all but replaced the traditional approach. A Real Time Approach to Process Control provides the student with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, students come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering students readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. Features: * The first and only textbook to use a completely real time approach. * Gives students the opportunity to understand and use HYSYS software. * Carefully designed workshops (tutorials) have been included to allow students to practice and apply the theory. * Includes many worked examples and student problems. VISIT THE AUTHORS' WEBSITE: www.ench.ucalgary.ca/~realtime

Download or read book Advanced Control of Industrial Processes written by Piotr Tatjewski and published by Springer Science & Business Media. This book was released on 2007-02-23 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the concepts and algorithms of advanced industrial process control and on-line optimization within the framework of a multilayer structure. It describes the interaction of three separate layers of process control: direct control, set-point control, and economic optimization. The book features illustrations of the methodologies and algorithms by worked examples and by results of simulations based on industrial process models.

Download or read book Methods of Model Based Process Control written by R. Berber and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model based control has emerged as an important way to improve plant efficiency in the process industries, while meeting processing and operating policy constraints. The reader of Methods of Model Based Process Control will find state of the art reports on model based control technology presented by the world's leading scientists and experts from industry. All the important issues that a model based control system has to address are covered in depth, ranging from dynamic simulation and control-relevant identification to information integration. Specific emerging topics are also covered, such as robust control and nonlinear model predictive control. In addition to critical reviews of recent advances, the reader will find new ideas, industrial applications and views of future needs and challenges. Audience: A reference for graduate-level courses and a comprehensive guide for researchers and industrial control engineers in their exploration of the latest trends in the area.