Download or read book Handbook of Polymers in Paper Conservation written by Elisabetta Princi and published by Smithers Rapra. This book was released on 2011-10-31 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest developments in paper conservation by using polymeric materials. A short introduction on polymer chemistry is given to highlight the polymer characteristics and properties. The book is then dedicated to the conservative problems and issues in the field of paper artworks. This practical book identifies the importance of each type of polymer, related to its nature and properties, from the point of view of paper conservation. With the help of schemes and tables, the polymers are classified in terms of characteristics and final uses in respect to this very complex material.

Download or read book Handbook of Polymers in Stone Conservation written by Elisabetta Princi and published by Smithers Rapra. This book was released on 2014-11-20 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is dedicated to the conservation of stone materials by the application of polymers. A short introduction on polymer chemistry is given to highlight their characteristics and properties. After the physical and chemical attributes of stone are summarised, the problems related to its degradation are discussed. Finally, the properties of the various polymers of potential value for stone restoration are reviewed and classified by schemes and tables, and pointers for the future are suggested.This handbook will be of great interest to those who share the author's enthusiasm for stone artworks and her dedication to their restoration and conservation.

Download or read book Handbook of Polymer Nanocomposites for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2020-10-29 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.770 pagesApprox.770 pages

Download or read book Biopolymers and Biopolymer Blends written by Abdul Khalil H.P.S. and published by CRC Press. This book was released on 2024-11-16 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer and Biopolymer Blends: Fundamentals, Processes, and Emerging Applications showcases the potential of biopolymers as alternative sources to conventional nonbiodegradable petroleum-based polymers. It discusses fundamentals of biopolymers and biopolymer blends from natural and synthetic sources, synthesis, and characterization. It also describes development of desired performance for specific applications in 3D printing and other emerging applications in industry, including packaging, pulp and paper, agriculture, biomedical, and marine. Introduces the fundamentals, synthesis, processing, and structural and functional properties of biopolymers and biopolymer blends Explains the fundamental framework of biopolymer blends in 3D printing, featuring current technologies, printing materials, and commercialization of biopolymers in 3D printing Reviews emerging applications, including active food packaging, electronic, antimicrobial, environmental, and more Discusses current challenges and futures prospects. Providing readers with a detailed overview of the latest advances in the field and a wealth of applications, this work will appeal to researchers in materials science and engineering, biotechnology, and related disciplines.

Download or read book Ageing and Stabilisation of Paper written by M. Strlic (ed.) and published by . This book was released on 2005 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Guide to the Preventive Conservation of Photograph Collections written by Bertrand Lavédrine and published by Getty Publications. This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A resource for the photographic conservator, conservation scientist, curator, as well as professional collector, this volume synthesizes both the masses of research that has been completed to date and the international standards that have been established on the subject.

Download or read book Handbook of Colorants Chemistry written by Ingo Klöckl and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-04-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of The Handbook of Colorant Chemistry focuses on paints, painting and drawing systems used by the painter and craftsman. From presenting molecular compositions of common paints and inks to a historical look at color chemistry, the author offers an in-depth look at the world of color.

Download or read book Historical Perspectives in the Conservation of Works of Art on Paper written by Margaret Holben Ellis and published by Getty Publications. This book was released on 2015-02-01 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the seventh in the Readings in Conservation series, which gathers and publishes texts that have been influential in the development of thinking about the conservation of cultural heritage. The present volume provides a selection of more than ninety-five texts tracing the development of the conservation of works of art on paper. Comprehensive and thorough, the book relates how paper conservation has responded to the changing place of prints and drawings in society. The readings include a remarkable range of historical selections from texts such as Renaissance printmaker Ugo da Carpi’s sixteenth-century petition to the Venetian senate on his invention of chiaroscuro, Thomas Churchyard’s 1588 essay in verse “A Sparke of Frendship and Warme Goodwill,” and Robert Bell’s 1773 piece “Observations Relative to the Manufacture of Paper and Printed Books in the Province of Pennsylvania.” These are complemented by influential writings by such figures as A. H. Munsell, Walter Benjamin, and Jacques Derrida, along with a generous representation of recent scholarship. Each reading is introduced by short remarks explaining the rationale for its selection and the principal matters covered, and the book is supplemented with a helpful bibliography. This volume is an indispensable tool for museum curators, conservators, and students and teachers of the conservation of works of art on paper.

Download or read book Handbook of Museum Textiles Volume 2 written by Seiko Jose and published by John Wiley & Sons. This book was released on 2022-11-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Museum Textiles Textiles have been known to us throughout human history and played a vital role in the lives and traditions of people. Clothing was made by using different materials and methods from natural fibers. There are different varieties of textiles, out of which certain traditional textiles, archaeological findings, or fragments are of cultural, historical, and sentimental value such as tapestries, embroideries, flags, shawls, etc. These kinds of textiles, due to their historical use and environmental factors, require special attention to guarantee their long-term stability. Textile conservation is a complex, challenging, and multi-faceted discipline and it is one of the most versatile branches of conservation. Volume II of the Handbook of Museum Textiles provides precise instruction for conservation techniques to preserve the textile heritage more scientifically and technologically. Additionally, the book covers the most modern techniques used to characterize archaeological textiles and dyes. Progress and innovation in nanotechnology-based interventions in museum textiles are emphasized. Chapters cover the general introduction to biological damage caused by physical and chemical agents and their prevention methods. Information on microscopy and characterization of historical textiles, ancient dyes, and prints is highlighted. Several aspects of assessment of degradation, repair, and stabilization of antique textiles are presented in depth. Experimental research methods for diagnosis and scientific study of fibers and natural dyes using LC-MS and UV-VIS are described. Practical knowledge based on analysis and visualization of historical textiles for the needs of museum conservation, exhibition, digital technology, and virtual museums is addressed as well. Audience It will serve as an educational asset and tool for researchers, art scholars, archaeologists, museum curators, and those who are interested in the field of traditional or historic textile collections.

Download or read book Conservation of Plastics written by Yvonne Shashoua and published by Routledge. This book was released on 2012-06-25 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic objects are included more than ever in museums and galleries collections these days, but these items can start to deteriorate when they a just a few years old. In this book Yvonne Shashoua provides the essential knowledge needed to keep plastic pieces in the best possible condition so that they can continue to be enjoyed for many years. The historical development of plastics, as well as the technology, their physical and chemical properties, identification, degradation and conservation are all clearly and concisely covered within this single volume, making it an invaluable reference for the increasing number of conservators and curators that are encountering plastics in their day to day work.

Download or read book Materials for Conservation written by C V Horie and published by Routledge. This book was released on 2013-05-13 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in Conservation is the definitive introduction to the properties of materials used in conservation. The continual struggle of conservators to ameliorate the deterioration of objects has led to increasing use of synthetic polymers. These materials are part of the sophisticated technology that has been developed to augment and often replace traditional materials and methods. Conservators therefore have a wider range of techniques available. However, they must be able to appreciate the potentials and pitfalls of any proposed technique. The first section explains physical and chemical properties which are important in the conservation process, i.e. application, ageing, reversal. The topics covered include molecular weight, glass transition temperature, solubility and solvents, polymerisation and degradation reactions. The second section provides a detailed consideration of the individual materials, current and obsolete, used in conservation, drawing out the factors relevant to their effects on objects. The conservation uses of each material are summarised and referenced to allow further study. In five appendices, the properties of the polymers, solvents and their interactions are tabulated, with a list of suppliers and conversion table of physical units. IUPAC and SI nomenclature is used throughout the book. In this second edition, this classic text is revised and updated to include modern materials such as cyclododecane, and current ideas on adhesion, consolidation and reversibility, making Materials in Conservation the definitive source of vital information in the field. This handy reference book should be on the bench of every conservator and available wherever objects, from steam engines to dried plants, are preserved.

Download or read book Conservation of Plastics written by Yvonne Shashoua and published by Routledge. This book was released on 2012-06-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic objects are included more than ever in museums and galleries collections these days, but these items can start to deteriorate when they a just a few years old. In this book Yvonne Shashoua provides the essential knowledge needed to keep plastic pieces in the best possible condition so that they can continue to be enjoyed for many years. The historical development of plastics, as well as the technology, their physical and chemical properties, identification, degradation and conservation are all clearly and concisely covered within this single volume, making it an invaluable reference for the increasing number of conservators and curators that are encountering plastics in their day to day work.

Download or read book Adhesives Technology Handbook written by Sina Ebnesajjad and published by William Andrew. This book was released on 2014-11-26 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion

Download or read book Conservation of Furniture written by Shayne Rivers and published by Routledge. This book was released on 2007-06-07 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive resource covering the principles and practice of the conservation and restoration of furniture, and other decorative art objects made wholly or partly of wood. It integrates theory with practice to show the principles which govern interaction between wooden objects, the environmental and conservation treatments and the factors which need to be taken into account to arrive at acceptable solutions to conservation problems. The practical knowledge and experience of a team of conservators active in the field are bought together with theoretical and reference material from diverse sources and unified within a systematic framework. Specialist conservators from related disciplines cover diverse materials often incorporated into furniture.

Download or read book Handbook of Hydrocolloids written by Glyn O. Phillips and published by Elsevier. This book was released on 2009-05-28 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrocolloids are among the most widely used ingredients in the food industry. They function as thickening and gelling agents, texturizers, stabilisers and emulsifiers and in addition have application in areas such as edible coatings and flavour release. Products reformulated for fat reduction are particularly dependent on hydrocolloids for satisfactory sensory quality. They now also find increasing applications in the health area as dietary fibre of low calorific value. The first edition of Handbook of Hydrocolloids provided professionals in the food industry with relevant practical information about the range of hydrocolloid ingredients readily and at the same time authoritatively. It was exceptionally well received and has subsequently been used as the substantive reference on these food ingredients. Extensively revised and expanded and containing eight new chapters, this major new edition strengthens that reputation. Edited by two leading international authorities in the field, the second edition reviews over twenty-five hydrocolloids, covering structure and properties, processing, functionality, applications and regulatory status. Since there is now greater emphasis on the protein hydrocolloids, new chapters on vegetable proteins and egg protein have been added. Coverage of microbial polysaccharides has also been increased and the developing role of the exudate gums recognised, with a new chapter on Gum Ghatti. Protein-polysaccharide complexes are finding increased application in food products and a new chapter on this topic as been added. Two additional chapters reviewing the role of hydrocolloids in emulsification and their role as dietary fibre and subsequent health benefits are also included. The second edition of Handbook of hydrocolloids is an essential reference for post-graduate students, research scientists and food manufacturers. - Extensively revised and expanded second edition edited by two leading international authorities - Provides an introduction to food hydrocolliods considering regulatory aspects and thickening characteristics - Comprehensively examines the manufacture, structure, function and applications of over twenty five hydrocolloids

Download or read book Evaluation of Cellulose Ethers for Conservation written by Robert L. Feller and published by Getty Publications. This book was released on 1991-03-21 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is the result of a three-year research program. It describes the chemical character of cellulose ethers as a general class of polymers and establishes an approximate ranking of the relative stability of each generic chemical subclass. Ranking the thermal stability of the polymers with respect to color change and loss in degree of polymerization led to the conclusion that as generic chemical classes, methylcellulose and carboxymethylcellulose appear to be the most stable of the cellulose ethers. Water-soluble ethylhydroxyethylcellulose apparently also possesses good stability. Of questionable long-term stability are hydroxyethylcellulose and hydroxy- propylcellulose. Ethylcellulose and organic-soluble ethylhydroxyethylcellulose proved to be of poor stability, potentially undergoing marked changes in twenty years or less under normal museum conditions. An important additional conclusion reached here, as well as in an earlier investigation, is that considerable variations in stability can occur within a generic chemical class from differences in the basic raw material, a natural product from plants, which is not a uniform, manufactured, chemical substance. Further variations can exist due to different manufacturing processes or commercial sources. Hence, commercial products must be evaluated individually to determine the most stable of a given generic type. Nonetheless, the authors believe the conclusions expressed here to be valid with regard to the relative stability of the generic chemical classes of cellulose ethers.

Download or read book Physico chemical Aspects of Textile Coloration written by Stephen M. Burkinshaw and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of textile materials comprises a very large and complex global industry that utilises a diverse range of fibre types and creates a variety of textile products. As the great majority of such products are coloured, predominantly using aqueous dyeing processes, the coloration of textiles is a large-scale global business in which complex procedures are used to apply different types of dye to the various types of textile material. The development of such dyeing processes is the result of substantial research activity, undertaken over many decades, into the physico-chemical aspects of dye adsorption and the establishment of ‘dyeing theory’, which seeks to describe the mechanism by which dyes interact with textile fibres. Physico-Chemical Aspects of Textile Coloration provides a comprehensive treatment of the physical chemistry involved in the dyeing of the major types of natural, man-made and synthetic fibres with the principal types of dye. The book covers: fundamental aspects of the physical and chemical structure of both fibres and dyes, together with the structure and properties of water, in relation to dyeing; dyeing as an area of study as well as the terminology employed in dyeing technology and science; contemporary views of intermolecular forces and the nature of the interactions that can occur between dyes and fibres at a molecular level; fundamental principles involved in dyeing theory, as represented by the thermodynamics and kinetics of dye sorption; detailed accounts of the mechanism of dyeing that applies to cotton (and other cellulosic fibres), polyester, polyamide, wool, polyacrylonitrile and silk fibres; non-aqueous dyeing, as represented by the use of air, organic solvents and supercritical CO2 fluid as alternatives to water as application medium. The up-to-date text is supported by a large number of tables, figures and illustrations as well as footnotes and widespread use of references to published work. The book is essential reading for students, teachers, researchers and professionals involved in textile coloration.