Download or read book Handbook of Peridynamic Modeling written by Florin Bobaru and published by CRC Press. This book was released on 2016-11-03 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the peridynamic modeling of failure and damage. Peridynamics is a reformulation of continuum mechanics based on integration of interactions rather than spatial differentiation of displacements. The book extends the classical theory of continuum mechanics to allow unguided modeling of crack propagation/fracture in brittle, quasi-brittle, and ductile materials; autonomous transition from continuous damage/fragmentation to fracture; modeling of long-range forces within a continuous body; and multiscale coupling in a consistent mathematical framework.
Download or read book Peridynamic Modeling Numerical Techniques and Applications written by Erkan Oterkus and published by Elsevier. This book was released on 2021-04-24 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an incisive look at cutting-edge peridynamic modeling methods, numerical techniques, their applications, and potential future directions for the field. It starts with an introductory chapter authored by Stewart Silling, who originally developed peridynamics. It then looks at new concepts in the field, with chapters covering dual-horizon peridynamics, peridynamics for axisymmetric analysis, beam and plate models in peridynamics, coupled peridynamics and XFEM, peridynamics for dynamic fracture modeling, and more. From there, it segues into coverage of cutting-edge applications of peridynamics, exploring its biological applications, modeling at the nanoscale, peridynamics for composites delamination and damage in ceramics, and more, concluding with a chapter on the application of artificial intelligence and machine learning in peridynamics. Covers modeling methods, numerical techniques, applications, and future directions for the field Discusses techniques such as dual-horizon peridynamics, damage modeling using the phase-field approach, and contact analysis of rigid and deformable bodies with refined non-ordinary state-based peridynamics Looks at a range of different peridynamic applications such as ice modeling, fiber-reinforced composite modeling, modeling at nanoscale, and more
Download or read book Computational Nondestructive Evaluation Handbook written by Sourav Banerjee and published by CRC Press. This book was released on 2020-06-01 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing computational wave propagation methods developed over 40 years of research, this comprehensive book offers a computational approach to NDE of isotropic, anisotropic, and functionally graded materials. It discusses recent methods to enable enhanced computational efficiency for anisotropic materials. It offers an overview of the need for and uses of NDE simulation. The content provides a basic understanding of ultrasonic wave propagation through continuum mechanics and detailed discussions on the mathematical techniques of six computational methods to simulate NDE experiments. In this book, the pros and cons of each individual method are discussed and guidelines for selecting specific simulation methods for specific NDE scenarios are offered. Covers ultrasonic CNDE fundamentals to provide understanding of NDE simulation methods Offers a catalog of effective CNDE methods to evaluate and compare Provides exercises on real-life NDE problems with mathematical steps Discusses CNDE for common material types, including isotropic, anisotropic, and functionally graded materials Presents readers with practical knowledge on ultrasonic CNDE methods This work is an invaluable resource for researchers, advanced students, and industry professionals across materials, mechanical, civil, and aerospace engineering, and anyone seeking to enhance their understanding of computational approaches for advanced material evaluation methods.
Download or read book Shell based Peridynamics for the Modelling of Isotropic and Composite Structures written by Ruqing Bai and published by Cambridge Scholars Publishing. This book was released on 2024-04-25 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unveiling improvements in the nonlocal theory of the Peridynamics, this book brings recent developments and new extensions to the standard Peridynamic method, making it capable of solving shell-like structures, while keeping its character of a strong formulation based on the interactions between pairs of material points, called “Peridynamic bonds”. The proposed formulation is a natural extension of the standard continuum Peridynamics, allowing thin structures to be modelled using only one layer of particles at the mid-surface of the structure, contrary to the standard continuum Peridynamics. The book navigates the mechanics formulation of the Peridynamic Timoshenko beam and Reissner-Mindlin plate and presents breakthrough strategies for shear-locking in thin structures. Enhanced methods are introduced for analysing fibre-reinforced composites, offering precision in predicting damage patterns in composite structures when subjected to low and moderate velocity impacts.
Download or read book Advances in Peridynamics written by Erdogan Madenci and published by Springer Nature. This book was released on 2022-05-20 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent improvements in peridynamic modeling of structures. It provides sufficient theory and numerical implementation helpful to both new and existing researchers in the field. The main focus of the book is on the non-ordinary state-based (NOSB) peridynamics (PD) and its applications for performing finite deformation. It presents the framework for modeling high stretch polymers, viscoelastic materials, thermoelasticity, plasticity, and creep. It provides a systematic derivation for dimensionally reduced structures such as axisymmetric structures and beams. Also, it presents a novel approach to impose boundary conditions without suffering from displacement kinks near the boundary. Furthermore, it presents refinements to bond-based PD model by including rotation kinematics for modeling isotropic and composite materials. Moreover, it presents a PD – FEM coupling framework in ANSYS based on principle for virtual work. Lastly, it presents an application of neural networks in the peridynamic (PINN) framework. Sample codes are provided for readers to develop hands-on experience on peridynamic modeling. Describes new developments in peridynamics and their applications in the presence of material and geometric nonlinearity; Describes an approach to seamlessly couple PD with FE; Introduces the use of the neural network in the PD framework to solve engineering problems; Provides theory and numerical examples for researchers and students to self-study and apply in their research (Codes are provided as supplementary material); Provides theoretical development and numerical examples suitable for graduate courses.
Download or read book Peridynamics and Its Applications Using Ansys written by Erdogan Madenci and published by Springer Nature. This book was released on with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlocal Modeling Analysis and Computation written by Qiang Du and published by SIAM. This book was released on 2019-03-20 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of complexity, singularity, and anomaly using nonlocal continuum models are steadily gaining popularity. This monograph provides an introduction to basic analytical, computational, and modeling issues and to some of the latest developments in these areas. Nonlocal Modeling, Analysis, and Computation includes motivational examples of nonlocal models, basic building blocks of nonlocal vector calculus, elements of theory for well-posedness and nonlocal spaces, connections to and coupling with local models, convergence and compatibility of numerical approximations, and various applications, such as nonlocal dynamics of anomalous diffusion and nonlocal peridynamic models of elasticity and fracture mechanics. A particular focus is on nonlocal systems with a finite range of interaction to illustrate their connection to local partial differential equations and fractional PDEs. These models are designed to represent nonlocal interactions explicitly and to remain valid for complex systems involving possible singular solutions and they have the potential to be alternatives for as well as bridges to existing models. The author discusses ongoing studies of nonlocal models to encourage the discovery of new mathematical theory for nonlocal continuum models and offer new perspectives on traditional models, analytical techniques, and algorithms.
Download or read book Computational Methods for Fracture written by Timon Rabczuk and published by MDPI. This book was released on 2019-10-28 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of 17 scientific papers about the computational modeling of fracture. Some of the manuscripts propose new computational methods and/or how to improve existing cutting edge methods for fracture. These contributions can be classified into two categories: 1. Methods which treat the crack as strong discontinuity such as peridynamics, scaled boundary elements or specific versions of the smoothed finite element methods applied to fracture and 2. Continuous approaches to fracture based on, for instance, phase field models or continuum damage mechanics. On the other hand, the book also offers a wide range of applications where state-of-the-art techniques are employed to solve challenging engineering problems such as fractures in rock, glass, concrete. Also, larger systems such as fracture in subway stations due to fire, arch dams, or concrete decks are studied.
Download or read book Proceedings of the International Conference on Aerospace System Science and Engineering 2020 written by Zhongliang Jing and published by Springer Nature. This book was released on 2021-06-01 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality contributions in the subject area of Aerospace System Science and Engineering, including topics such as: Trans-space vehicle systems design and integration, Air vehicle systems, Space vehicle systems, Near-space vehicle systems, Opto-electronic system, Aerospace robotics and unmanned system, Aerospace robotics and unmanned system, Communication, navigation, and surveillance, Dynamics and control, Intelligent sensing and information fusion, Aerodynamics and aircraft design, Aerospace propulsion, Avionics system, Air traffic management, Earth observation, Deep space exploration, and Bionic micro-aircraft/spacecraft. The book collects selected papers presented at the 4th International Conference on Aerospace System Science and Engineering (ICASSE 2020), organized by Shanghai Jiao Tong University, China, held on 14–16 July 2020 as virtual event due to COVID-19. It provides a forum for experts in aeronautics and astronautics to share new ideas and findings. ICASSE conferences have been organized annually since 2017 and hosted in Shanghai, Moscow, and Toronto in turn, where the three regional editors of the journal Aerospace Systems are located.
Download or read book Simulation of Additive Manufacturing using Meshfree Methods written by Christian Weißenfels and published by Springer Nature. This book was released on 2021-10-29 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed instruction to virtually reproduce the processes of Additive Manufacturing on a computer. First, all mathematical equations needed to model these processes are presented. Due to their flexibility, meshfree methods represent optimal computational solution schemes to simulate Additive Manufacturing processes. On the other hand, these methods usually do not guarantee an accurate solution. For this reason, this monograph is dedicated in detail to the necessary criteria for computational solution schemes to provide accurate results. Several meshfree methods are examined with respect to these conditions. Two different 3D printing techniques are presented in detail. The results obtained from the simulation are investigated and compared with experimental data. This work is addressed to both scientists and professionals working in the field of development who are interested to learn the secrets behind meshfree methods or get into the modeling of Additive Manufacturing.
Download or read book Virtual Design and Validation written by Peter Wriggers and published by Springer Nature. This book was released on 2020-03-03 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the experimental characterization of materials and their numerical modeling, as well as the development of new computational methods for virtual design. Its 17 contributions are divided into four main sections: experiments and virtual design, composites, fractures and fatigue, and uncertainty quantification. The first section explores new experimental methods that can be used to more accurately characterize material behavior. Furthermore, it presents a combined experimental and numerical approach to optimizing the properties of a structure, as well as new developments in the field of computational methods for virtual design. In turn, the second section is dedicated to experimental and numerical investigations of composites, with a special focus on the modeling of failure modes and the optimization of these materials. Since fatigue also includes wear due to frictional contact and aging of elastomers, new numerical schemes in the field of crack modeling and fatigue prediction are also discussed. The input parameters of a classical numerical simulation represent mean values of actual observations, though certain deviations arise: to illustrate the uncertainties of parameters used in calculations, the book’s final section presents new and efficient approaches to uncertainty quantification.
Download or read book Experimental Vibration Analysis for Civil Engineering Structures written by Zhishen Wu and published by Springer Nature. This book was released on 2022-08-23 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed contributions from the 9th International Conference on Experimental Vibration Analysis for Civil Engineering Structures (EVACES 2021), organized by the University of Tokyo and Saitama University from September 17-20, 2021 on the Hongo campus of the University of Tokyo, and hosted in an online format. The event brought together engineers, scientists, researchers, and practitioners, providing a forum for discussing and disseminating the latest developments and achievements in all major aspects of dynamic testing for civil engineering structures, including instrumentation, sources of excitation, data analysis, system identification, monitoring and condition assessment, in-situ and laboratory experiments, codes and standards, and vibration mitigation. The topics of EVACES 2021 included but were not limited to: damage identification and structural health monitoring; testing, sensing and modeling; vibration isolation and control; system and model identification; coupled dynamical systems (including human–structure, vehicle–structure, and soil–structure interaction); and application of advanced techniques involving the Internet of Things, robot, UAV, big data and artificial intelligence.
Download or read book Topics in Modal Analysis Testing Volume 9 written by Michael Mains and published by Springer. This book was released on 2018-07-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis & Testing, Volume 9: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics, 2018, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Modal Analysis, including papers on: Operational Modal & Modal Analysis Applications Experimental Techniques Modal Analysis, Measurements & Parameter Estimation Modal Vectors & Modeling Basics of Modal Analysis Additive Manufacturing & Modal Testing of Printed Parts
Download or read book Peridynamic Theory and Its Applications written by Erdogan Madenci and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the peridynamic theory, which provides the capability for improved modeling of progressive failure in materials and structures, and paves the way for addressing multi-physics and multi-scale problems. The book provides students and researchers with a theoretical and practical knowledge of the peridynamic theory and the skills required to analyze engineering problems. The text may be used in courses such as Multi-physics and Multi-scale Analysis, Nonlocal Computational Mechanics, and Computational Damage Prediction. Sample algorithms for the solution of benchmark problems are available so that the reader can modify these algorithms, and develop their own solution algorithms for specific problems. Students and researchers will find this book an essential and invaluable reference on the topic.
Download or read book Proceedings Of The International Congress Of Mathematicians 2018 Icm 2018 In 4 Volumes written by Sirakov Boyan and published by World Scientific. This book was released on 2019-02-27 with total page 5396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Proceedings of the ICM publishes the talks, by invited speakers, at the conference organized by the International Mathematical Union every 4 years. It covers several areas of Mathematics and it includes the Fields Medal and Nevanlinna, Gauss and Leelavati Prizes and the Chern Medal laudatios.
Download or read book Mechanical Engineering and Materials written by Jinyang Xu and published by Springer Nature. This book was released on 2021-03-24 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of mechanical engineering, as presented by leading international researchers and engineers at the 2020 International Conference on Mechanical Engineering and Materials (ICMEM), held in Beijing, China on October 16-17, 2020. ICMEM covers all aspects of mechanical engineering and material sciences, such as computer-aided design, virtual design and design visualization, intelligent design, usability design, automobile structure, human-machine interface design, manufacturing engineering, aerospace engineering, automation and robotics, micro-machining, MEMS/ NEMS, composite materials, biomaterials, smart materials, superconducting materials, materials properties and applications, materials manufacturing, nanotechnology, nano-materials and nano-composites, etc. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
