Download or read book Handbook of Hot dip Galvanization written by Peter Maaß and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-dip galvanization is a method for coating steel workpieces with a protective zinc film to enhance the corrosion resistance and to improve the mechanical material properties. Hot-dip galvanized steel is the material of choice underlying many modern buildings and constructions, such as train stations, bridges and metal domes. Based on the successful German version, this edition has been adapted to include international standards, regulations and best practices. The book systematically covers all steps in hot-dip galvanization: surface pre-treatment, process and systems technology, environmental issues, and quality management. As a result, the reader finds the fundamentals as well as the most important aspects of process technology and technical equipment, alongside contributions on workpiece requirements for optimal galvanization results and methods for applying additional protective coatings to the galvanized pieces. With over 200 illustrated examples, step-by-step instructions, presentations and reference tables, this is essential reading for apprentices and professionals alike.
Download or read book Hot Dip Galvanizing of Steel Structures written by Vlastimil Kuklik and published by Butterworth-Heinemann. This book was released on 2016-02-09 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-Dip Galvanizing of Steel Structures contains practical information that is useful for both researchers in hot-dip galvanizing and engineers, designers, and inspectors. The book draws from the empirical experience and research of the authors, complementing the current state of knowledge of morphological variations of the coating and causes of coating delamination. The book includes chapters devoted to qualitative tests of the coating, and to methods of making corrections. A section describing the principle of protecting steel against corrosion through zinc coating is also provided, along with an extensive chapter on the principles of good design for hot-dip galvanizing. The chapter related to the safety of hot-dip galvanized steel structures offers a new hypothesis about the mechanism of nucleation of LMAC cracks during hot-dip galvanizing, thus enriching the knowledge regarding this phenomenon. - Provides practical information on hot-dip galvanizing from a scientific-disciplinary perspective, including coverage of design principles, reliability of galvanized structures, and legal aspects - Features chapters devoted to qualitative assessments of the surface treatment and methods for correcting problems - Includes discussion of hot-dip galvanizing with regard to environmental aspects and sustainable development
Download or read book Handbook of the Chemical Elements written by Hermann Sicius and published by Springer Nature. This book was released on with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Induction Heating written by Valery Rudnev and published by CRC Press. This book was released on 2017-07-14 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Handbook of Induction Heating reflects the number of substantial advances that have taken place over the last decade in theory, computer modeling, semi-conductor power supplies, and process technology of induction heating and induction heat treating. This edition continues to be a synthesis of information, discoveries, and technical insights that have been accumulated at Inductoheat Inc. With an emphasis on design and implementation, the newest edition of this seminal guide provides numerous case studies, ready-to-use tables, diagrams, rules-of-thumb, simplified formulas, and graphs for working professionals and students.
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book Corrosion Resistance of Zinc and Zinc Alloys written by Frank C. Porter and published by CRC Press. This book was released on 1994-06-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: A cornerstone reference in the field, this work analyzes available information on the corrosion resistance of zinc and its alloys both as solid materials and as coatings on steel, detailing the corrosion resistance of zinc in atmospheric, aqueous, underground and chemical environments. Corrosion Resistance of Zinc and Zinc Alloys illustrates the nu
Download or read book Handbook of Research on Developments and Trends in Industrial and Materials Engineering written by Sahoo, Prasanta and published by IGI Global. This book was released on 2019-11-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s modernized world, new research and empirical findings are being conducted and found within various professional industries. The field of engineering is no different. Industrial and material engineering is continually advancing, making it challenging for practitioners to keep pace with the most recent trends and methods. Engineering professionals need a handbook that provides up-to-date research on the newest methodologies in this imperative industry. The Handbook of Research on Developments and Trends in Industrial and Materials Engineering is a collection of innovative research on the theoretical and practical aspects of integrated systems within engineering. This book provides a forum for professionals to understand the advancing methods of engineering. While highlighting topics including operations management, decision analysis, and communication technology, this book is ideally designed for researchers, managers, engineers, industrialists, manufacturers, academicians, policymakers, scientists, and students seeking current research on recent findings and modern approaches within industrial and materials engineering.
Download or read book Zinc Surfaces written by L. William Zahner and published by John Wiley & Sons. This book was released on 2021-04-20 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZINC SURFACES THE LEADING RESOURCE FOR ARCHITECTS, DESIGNERS, AND ARTISTS WORKING WITH ZINC Zinc Surfaces: A Guide to Alloys, Finishes, Fabrication and Maintenance in Architecture and Art combines the latest guidance and information about zinc surfaces into a single and comprehensive resource for architects and artists everywhere. The fifth book in the author’s authoritative Architectural Metals Series, Zinc Surfaces offers a highly visual, full-color guide to ensure architects and design professionals have the information they need to properly maintain and fabricate zinc surfaces. Numerous case studies illuminate and highlight the theoretical principles contained within. Full of concrete strategies and practical advice, Zinc Surfaces provides readers with complete information on topics including: The use of zinc in architecture The history of zinc’s use in design How to choose the right alloy for your purposes Surface and chemical finishes Corrosion resistance of various alloys This book is perfect for architecture professionals, metal fabricators and developers, architecture students and instructors, and designers and artists working with metals.
Download or read book Hard Rock Miner s Handbook written by Jack De la Vergne and published by . This book was released on 2008 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Networked Control Systems for Connected and Automated Vehicles written by Alexander Guda and published by Springer Nature. This book was released on 2022-11-15 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of large-scale distributed energy systems over communication networks is an important topic with many application domains. The book presents novel concepts of distributed control for networked and cyber-physical systems (CPS), such as smart industrial production lines, smart energy grids, and autonomous vehicular systems. It focuses on new solutions in managing data and connectivity to support connected and automated vehicles (CAV). The book compiles original research papers presented at the conference “Networked Control Systems for Connected and Automated Vehicles” (Russia). The latest connected and automated vehicle technologies for next generation autonomous vehicles are presented. The book sets new goals for the standardization of the scientific results obtained and the advancement to the level of full autonomy and full self-driving (FSD). The book presents the latest research in artificial intelligence, assessing virtual environments, deep learning systems, and sensor fusion for automated vehicles. Particular attention is paid to new safety standards, safety and security systems, and control of epidemic spreading over networks. The issues of building modern transport infrastructure facilities are also discussed in the articles presented in this book. The book is of considerable interest to scientists, researchers, and graduate students in the field of transport systems, as well as for managers and employees of companies using or producing equipment for these systems.
Download or read book Copper Brass and Bronze Surfaces written by L. William Zahner and published by John Wiley & Sons. This book was released on 2020-03-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A FULL-COLOR GUIDE FOR ARCHITECTS AND DESIGN PROFESSIONALS TO THE SELECTION AND APPLICATION OF COPPER, BRASS, AND BRONZE Copper, Brass, and Bronze Surfaces, third in Zahner's Architectural Metals Series, provides a comprehensive and authoritative treatment of copper, brass, and bronze applications in architecture and art. If offers architecture and design professionals the information they need to ensure proper maintenance and fabrication techniques through detailed information and full-color images. It covers everything from the history of the metals and choosing the right alloy, to detailed information on a variety of surface and chemical finishes and corrosion resistance. The book also features case studies that offer strategies for designing and executing successful projects using copper, brass, and bronze. Copper, Brass, and Bronze Surfaces is filled with illustrated case studies that present comprehensive coverage of how each metal is used in creating surfaces for building exteriors, interiors, and art finishes. All the books in Zahner's Architectural Metals Series offer in-depth coverage of today's most commonly used metals in architecture and art. This visual guide: Features full-color images of a variety of copper, brass, and bronze finishes, colors, textures, and forms Includes case studies with performance data that feature strategies on how to design and execute successful projects using copper, brass, and bronze Offers methods to address corrosion, before and after it occurs Explains the significance of the different alloys and the forms available to the designer Discusses what to expect when using copper, brass, and bronze in various exposures Written for architecture professionals, metal fabricators and developers, architecture students, designers, and artists working with metals, Copper, Brass, and Bronze Surfaces offers a logical framework for the selection and application of copper, brass, and bronze in all aspects of architecture.
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book Adhesive Bonding written by Robert D. Adams and published by Woodhead Publishing. This book was released on 2021-07-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive Bonding: Science, Technology and Applications, Second Edition guides the reader through the fundamentals, mechanical properties and applications of adhesive bonding. This thoroughly revised and expanded new edition reflects the many advances that have occurred in recent years. Sections cover the fundamentals of adhesive bonding, explaining how adhesives and sealants work, and how to assess and treat surfaces, how adhesives perform under stress and the factors affecting fatigue and failure, stress analysis, environmental durability, non-destructive testing, impact behavior, fracture mechanics, fatigue, vibration damping, and applications in construction, automotive, marine, footwear, electrical engineering, aerospace, repair, electronics, biomedicine, and bonding of composites. With its distinguished editor and international team of contributors, this book is an essential resource for industrial engineers, R&D, and scientists working with adhesives and their industrial applications, as well as researchers and advanced students in adhesion, joining, polymer science, materials science and mechanical engineering. - Offers detailed, methodical coverage of the fundamentals, mechanical properties and industrial applications of adhesive bonding - Enables the successful preparation of adhesives for a broad range of important load-bearing applications in areas such as automotive and aerospace, construction, electronics and biomedicine - Covers the latest advances in adhesive bonding, including improved repair techniques for metallic and composite structures, cohesive zone modeling, and disassembly and recycling
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book Proceedings of The 17th East Asian Pacific Conference on Structural Engineering and Construction 2022 written by Guoqing Geng and published by Springer Nature. This book was released on 2023-03-13 with total page 1545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from The 17th East Asian-Pacific Conference on Structural Engineering and Construction, 2022, organized by National University of Singapore. These peer-reviewed articles, authored by professional engineers, academics and researchers, highlight the recent research and developments in structural engineering and construction, embracing the theme- “Towards a Resilient and Sustainable City”. The papers presented in this proceeding provide in-depth discussions with key insights into the future research, development and engineering translation in structural engineering and construction.
Download or read book Intelligent Coatings for Corrosion Control written by Atul Tiwari and published by Butterworth-Heinemann. This book was released on 2014-10-25 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Coatings for Corrosion Control covers the most current and comprehensive information on the emerging field of intelligent coatings. The book begins with a fundamental discussion of corrosion and corrosion protection through coatings, setting the stage for deeper discussion of the various types of smart coatings currently in use and in development, outlining their methods of synthesis and characterization, and their applications in a variety of corrosion settings. Further chapters provide insight into the ongoing research, current trends, and technical challenges in this rapidly progressing field. - Reviews fundamentals of corrosion and coatings for corrosion control before delving into a discussion of intelligent coatings—useful for researchers and grad students new to the subject - Covers the most current developments in intelligent coatings for corrosion control as presented by top researchers in the field - Includes many examples of current and potential applications of smart coatings to a variety of corrosion problems
Download or read book A New Era for Microbial Corrosion Mitigation Using Nanotechnology written by Basma A. Omran and published by Springer Nature. This book was released on 2020-07-16 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on corrosion and microbial corrosion, providing solutions for these problems based on nanotechnology and nanobiotechnology. It introduces the causes, consequences, cost and control of corrosion processes. It gives a particular emphasis on microbial corrosion of steel and other metals in oil, gas and shipping industries. The book presents the materials vulnerable to such kind of corrosion, and the use of nanomaterials to control it.
