Download or read book Steel and Its Heat Treatment written by Karl-Erik Thelning and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.

Download or read book Heat Treater s Guide written by Harry Chandler and published by ASM International. This book was released on 1994-12-31 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is a complete revision and contains a great deal of new subject matter including information on ferrous powder metallurgy, cast irons, ultra high strength steels, furnace atmospheres, quenching processes, SPC and computer technology. Data on over 135 additional irons and steels have been added to the previously-covered 280 alloys.

Download or read book Metals Handbook written by Asm international. Handbook committee and published by . This book was released on 1990 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Heat Treatment of Steels written by K. H. Prabhudev and published by . This book was released on 1988 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.

Download or read book ASM Handbook written by and published by . This book was released on 1990 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.

Download or read book Heat Treatment of Gears written by A. K. Rakhit and published by ASM International. This book was released on 2000 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Rakhit wants other engineers to avoid the considerable trouble he had understanding the art of gear heat treatment when he first embarked on a career in gear design and manufacturing. He explains how heat treating and gears made of some kinds of steel gives the gears high geometric accuracy, but can also distort them and raise the cost of manufacturing, so a gear engineer needs to excel in manufacturing, lubrication, life and failure analysis, and machine design as well as design. He presents a case history of each successful gear heat treatment process that provide information on the quality of gear that can be expected with the proper control of material and processes. Annotation copyrighted by Book News Inc., Portland, OR

Download or read book Practical Heat Treating written by Jon L. Dossett and published by ASM International. This book was released on 2006-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is heat treatment? This book describes heat treating technology in clear, concise, and nontheoretical language. It is an excellent introduction and guide for design and manufacturing engineers, technicians, students, and others who need to understand why heat treatment is specified and how different processes are used to obtain desired properties. The new Second Edition has been extensively updated and revised by Jon. L. Dossett, who has more than forty years of experience in theat treating operations and management. The update adds important information about new processes and process control techniques that have been developed or refined in recent years. Helpfull appendices have been added on decarburization of steels, boost/diffues cycles for carburizing, and process verification.

Download or read book Handbook of Thermal Process Modeling Steels written by Cemil Hakan Gur and published by CRC Press. This book was released on 2008-12-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work

Download or read book Steel Heat Treatment Handbook 2 Volume Set written by George E. Totten and published by CRC Press. This book was released on 2006-11-14 with total page 1571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents the classical perspectives that form the basis of heat treatment processes while incorporating descriptions of the latest advances to impact this enduring technology. The second edition of the bestselling Steel Heat Treatment Handbook now offers abundantly updated and extended coverage in two self-contained volumes:

Download or read book Heat Treatment written by William E. Bryson and published by Hanser. This book was released on 2015-06-03 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on heat-treating by ASM, SME, and AISI standards. The manual has been created for use in student education, as well as to guide professionals who has been heat treating their entire lives. It is written without the typical metallurgical jargon. This book will serve as a training manual from day one in learning how to heat treat a metal, and then also serve as a day to day reference for a lifetime. This manual zeros in on the popular tool steels, alloy steels, heat-treatable stainless steels, case hardening steels, and more. It deals with these metals with up-to-date usage and processing recipes. What is different with this manual from all the others is that it doesn't just deal with the heat-treatment process, it also covers the continuation of the hardening process with cryogenics. Yes, it is written to help those who may want a thorough understanding of what goes on in the process of heat-treating, and how to do it better. However, it also shows how proper heat and cryogenic processing can save your company money. Making money through longer life tooling, decarb-free and stress relief, all while learning how to create a better, finer grain structure. This manual shows the reader that hardness is only an indication of hardness, and that the real money savings is in the fine grained structure. This manual is written for toolmakers, engineers, heat-treaters, procurement, management personnel, and anyone else who is involved in metals. Metals are affected by the entire thermal scale from 2400�F, down to -320�F. That is the complete range of thermally treated metals and that is what this manual covers.

Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PRACTICAL HEAT TREATING written by JON L. DOSSETT and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Castings Handbook 6th Edition written by Malcolm Blair and published by ASM International. This book was released on 1995-01-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallurgy and Heat Treatment the Pocket Book 2nd Edition written by Atif A. Odeh and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Induction Heat Treating Second Edition written by Richard E. Haimbaugh and published by ASM International. This book was released on 2015-08-01 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Induction Heat Treating, Second Edition is a quick reference source for induction heaters. This book ties-in the metallurgy, theory, and practice of induction heat treating from a hands-on explanation of what floor people need to know. This book includes practical tables and process analysis of induction heating.

Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)