Download or read book Handbook for Cleaning for Semiconductor Manufacturing written by Karen A. Reinhardt and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an In-depth discussion of surface conditioning for semiconductor applications The Handbook of Cleaning for Semiconductor Manufacturing: Fundamentals and Applications provides an in-depth discussion of surface conditioning for semiconductor applications. The fundamental physics and chemistry associated with wet processing is reviewed as well as surface and colloidal aspects of cleaning and etching. Topics covered in this new reference include: Front end line (FEOL) and back end of line (BEOL) cleaning applications such as high-k/metal gate post-etch cleaning and pore sealing, high-dose implant stripping and cleaning, and germanium, and silicon passivation Formulation development practices, methodology and a new directions are presented including chemicals used for preventing corrosion of copper lines, cleaning aluminium lines, reclaiming wafers, and water bonding, as well as the filtering and recirculating of chemicals including reuse and recycling Wetting, cleaning, and drying of features, such as high aspect ratio features and hydrophilic surface states, especially how to dry without watermarks, the abilities to wet hydrophobic surfaces and to remove liquid from deep features The chemical reactions and mechanisms of silicon dioxide etching with hydrofluoric acid, particle removal with ammonium hydroxide/hydrogen peroxide mixture, and metal removal with hydrochloric acid The Handbook of Cleaning for Semiconductor Manufacturing: Fundamentals and Applications is a valuable resource for any engineer or manager associated with using or supplying cleaning and contamination free technologies for semiconductor manufacturing. Engineers working for semiconductor manufacturing, capital equipment, chemicals, or other industries that assures cleanliness of chemicals, material, and equipment in the manufacturing area will also find this handbook an indispensible reference.

Download or read book Handbook for Cleaning for Semiconductor Manufacturing written by Karen A. Reinhardt and published by Wiley-Scrivener. This book was released on 2011-01-11 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume provides an in-depth discussion of the fundamentals of cleaning and surface conditioning of semiconductor applications such as high-k/metal gate cleaning, copper/low-k cleaning, high dose implant stripping, and silicon and SiGe passivation. The theory and fundamental physics associated with wet etching and wet cleaning is reviewed, plus the surface and colloidal aspects of wet processing. Formulation development practices and methodology are presented along with the applications for preventing copper corrosion, cleaning aluminum lines, and other sensitive layers. This is a must-have reference for any engineer or manager associated with using or supplying cleaning and contamination free technologies for semiconductor manufacturing. From the Reviews... "This handbook will be a valuable resource for many academic libraries. Many engineering librarians who work with a variety of programs (including, but not limited to Materials Engineering) should include this work in their collection. My recommendation is to add this work to any collection that serves a campus with a materials/manufacturing/electrical/computer engineering programs and campuses with departments of physics and/or chemistry with large graduate-level enrollment." —Randy Wallace, Department Head, Discovery Park Library, University of North Texas

Download or read book Semiconductor Manufacturing Handbook written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2005-05-18 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: WORLD-CLASS SEMICONDUCTOR MANUFACTURING EXPERTISE AT YOUR FINGERTIPS This is a comprehensive reference to the semiconductor manufacturing process and ancillary facilities -- from raw material preparation to packaging and testing, applying basics to emerging technologies. Readers charged with optimizing the design and performance of manufacturing processes will find all the information necessary to produce the highest quality chips at the lowest price in the shortest time possible. The Semiconductor Manufacturing Handbook provides leading-edge information on semiconductor wafer processes, MEMS, nanotechnology, and FPD, plus the latest manufacturing and automation technologies, including: Yield Management Automated Material Handling System Fab and Cleanroom Design and Operation Gas Abatement and Waste Treatment Management And much more Written by 60 international experts, and peer reviewed by a seasoned advisory board, this handbook covers the fundamentals of relevant technology and its real-life application and operational considerations for planning, implementing, and controlling manufacturing processes. It includes hundreds of detailed illustrations and a list of relevant books, technical papers, and websites for further research. This inclusive, wide-ranging coverage makes the Semiconductor Manufacturing Handbook the most comprehensive single-volume reference ever published in the field. STATE-OF-THE-ART SEMICONDUCTOR TECHNOLOGIES AND MANUFACTURING PROCESSES: SEMICONDUCTOR FUNDAMENTALS How Chips Are Designed and Made * Substrates * Copper and Low-k Dielectrics * Silicide Formation * Plasma * Vacuum * Photomask WAFER PROCESSING TECHNOLOGIES Microlithography * Ion Implantation * Etch * PVD/ALD * CVD * ECD * Epitaxy * CMP * Wet Cleaning FINAL MANUFACTURING Packaging * Grinding, Stress Relief, Dicing * Inspection, Measurement, and Testing NANOTECHNOLOGY, MEMS, AND FPD GAS AND CHEMICALS Specialty Gas System and DCA * Gas Abatement Systems * Chemical and Slurries Delivery System * Ultra Pure Water FAB YIELD, OPERATIONS, AND FACILITIES Yield Management * Automated Materials Handling System * Metrology * Six Sigma * Advanced Process Control * EHS * Fab Design and Construction * Cleanroom * Vibration and Acoustic Control * ESD * Airborne Molecular Control * Particle Monitoring * Wastewater Neutralization Systems

Download or read book Handbook of Chemicals and Gases for the Semiconductor Industry written by Ashutosh Misra and published by John Wiley & Sons. This book was released on 2002-03-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive guide to the chemicals and gases used in semiconductor manufacturing The fabrication of semiconductor devices involves a series of complex chemical processes such as photolithography, etching, cleaning, thin film deposition, and polishing. Until now, there has been no convenient source of information on the properties, applications, and health and safety considerations of the chemicals used in these processes. The Handbook of Chemicals and Gases for the Semiconductor Industry meets this need. Each of the Handbook's eight chapters is related to a specific area of semiconductor processing. The authors provide a brief overview of each step in the process, followed by tables containing physical properties, handling, safety, and other pertinent information on chemicals and gases typically used in these processes. The 270 chemical and gas entries include data on physical properties, emergency treatment procedures, waste disposal, and incompatible materials, as well as descriptions of applications, chemical mechanisms involved, and references to the literature. Appendices cross-reference entries by process, chemical name, and CAS number. The Handbook's eight chapters are: Thin Film Deposition Materials Wafer Cleaning Materials Photolithography Materials Wet and Dry Etching Materials Chemical Mechanical Planarizing Methods Carrier Gases Uncategorized Materials Semiconductor Chemicals Analysis No other single source brings together these useful and important data on chemicals and gases used in the manufacture of semiconductor devices. The Handbook of Chemicals and Gases for the Semiconductor Industry will be a valuable reference for process engineers, scientists, suppliers to the semiconductor industry, microelectronics researchers, and students.

Download or read book Handbook of Semiconductor Wafer Cleaning Technology written by Werner Kern and published by William Andrew. This book was released on 1993-12-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses semiconductor wafer cleaning and the scientific and technical disciplines associated directly or indirectly with this subject. Intended to serve as a handbook for practitioners and professionals in the field.

Download or read book Handbook of Silicon Wafer Cleaning Technology written by Karen Reinhardt and published by William Andrew. This book was released on 2018-03-16 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Silicon Wafer Cleaning Technology, Third Edition, provides an in-depth discussion of cleaning, etching and surface conditioning for semiconductor applications. The fundamental physics and chemistry associated with wet and plasma processing are reviewed, including surface and colloidal aspects. This revised edition includes the developments of the last ten years to accommodate a continually involving industry, addressing new technologies and materials, such as germanium and III-V compound semiconductors, and reviewing the various techniques and methods for cleaning and surface conditioning. Chapters include numerous examples of cleaning technique and their results. The book helps the reader understand the process they are using for their cleaning application and why the selected process works. For example, discussion of the mechanism and physics of contamination, metal, particle and organic includes information on particle removal, metal passivation, hydrogen-terminated silicon and other processes that engineers experience in their working environment. In addition, the handbook assists the reader in understanding analytical methods for evaluating contamination. The book is arranged in an order that segments the various cleaning techniques, aqueous and dry processing. Sections include theory, chemistry and physics first, then go into detail for the various methods of cleaning, specifically particle removal and metal removal, amongst others. Focuses on cleaning techniques including wet, plasma and other surface conditioning techniques used to manufacture integrated circuits Reliable reference for anyone that manufactures integrated circuits or supplies the semiconductor and microelectronics industries Covers processes and equipment, as well as new materials and changes required for the surface conditioning process

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 3276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.

Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 1720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.

Download or read book Handbook for Critical Cleaning Cleaning agents and systems written by Barbara Kanegsberg and published by CRC Press. This book was released on 2011 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Nearly all companies which manufacture or fabricate high-value physical objects (components, parts, assemblies) perform critical cleaning at one or more stages. These range from the giants of the semiconductor, aerospace, and biomedical world to a host of small to medium to large companies producing a dizzying array of components"--

Download or read book Handbook for Critical Cleaning Second Edition 2 Volume Set written by Barbara Kanegsberg and published by CRC Press. This book was released on 2017-06-21 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Nearly all companies which manufacture or fabricate high-value physical objects (components, parts, assemblies) perform critical cleaning at one or more stages. These range from the giants of the semiconductor, aerospace, and biomedical world to a host of small to medium to large companies producing a dizzying array of components"--

Download or read book Nontraditional Manufacturing Processes written by Gary F. Benedict and published by CRC Press. This book was released on 2017-10-19 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a convenient, single source of information on advanced machining, material forming, and joining processes. It describes available technologies that use tools, such as high velocity material jets, pulsed magnetic fields, light beams, electrochemical reactions, and more. Organized by type of process (mechanical, chemical, electrochemical, and thermal), the book discusses 31 important nontraditional processes and covers each process’s principles, equipment, capabilities, and operating parameters. The author includes a list of nontraditional manufacturing firms, nearly 250 figures that clearly illustrate the technologies, and numerous bibliographic citations for additional reading.

Download or read book Handbook for Critical Cleaning written by Barbara Kanegsberg and published by . This book was released on 2011 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly all companies which manufacture or fabricate high-value physical objects (components, parts, assemblies) perform critical cleaning at one or more stages. These range from the giants of the semiconductor, aerospace, and biomedical world to a host of small to medium to large companies producing a dizzying array of components"

Download or read book Cleaning with Solvents Science and Technology written by John Durkee and published by William Andrew. This book was released on 2013-11-29 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-precision cleaning is required across a wide range of sectors, including aerospace, defense, medical device manufacturing, pharmaceutical processing, semiconductor/electronics, etc. Cleaning parts and surfaces with solvents is simple, effective and low-cost. Although health and safety and environmental concerns come into play with the use of solvents, this book explores how safe and compliant solvent-based cleaning techniques can be implemented. A key to this is the selection of the right solvent. The author also examines a range of newer "green" solvent cleaning options. This book supplies scientific fundamentals and practical guidance supported by real-world examples. Durkee explains the three principal methods of solvent selection: matching of solubility parameters, reduction of potential for smog formation, and matching of physical properties. He also provides guidance on the safe use of aerosols, wipe-cleaning techniques, solvent stabilization, economics, and many other topics. A compendium of blend rules is included, covering the physical, chemical, and environmental properties of solvents. Three methods explained in detail for substitution of suitable solvents for those unsuitable for any reason: toxic solvents don't have to be tolerated; this volume explains how to do better Enables users to make informed judgments about their selection of cleaning solvents for specific applications, including solvent replacement decisions Explains how to plan and implement solvent cleaning systems that are effective, economical and compliant with regulations

Download or read book Handbook for Critical Cleaning written by Barbara Kanegsberg and published by CRC Press. This book was released on 2000-12-26 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: With all the cleaning approaches available, how do you choose which one is best for your needs? Components manufacturers wonder which will provide a competitive edge. Chemists and engineers worry about the effect of any process modification on a critical component or on the stability of an irreplaceable antique. There is no silver bullet, n

Download or read book Ultraclean Surface Processing of Silicon Wafers written by Takeshi Hattori and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: A totally new concept for clean surface processing of Si wafers is introduced in this book. Some fifty distinguished researchers and engineers from the leading Japanese semiconductor companies, such as NEC, Hitachi, Toshiba, Sony and Panasonic as well as from several universities reveal to us for the first time the secrets of these highly productive institutions. They describe the techniques and equipment necessary for the preparation of clean high-quality semiconductor surfaces as a first step in high-yield/high-quality device production. This book thus opens the door to the manufacturing of reliable nanoscale devices and will be extremely useful for every engineer, physicist and technician involved in the production of silicon semiconductor devices.

Download or read book Chemical Mechanical Planarization of Semiconductor Materials written by M.R. Oliver and published by Springer Science & Business Media. This book was released on 2004-01-26 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a comprehensive review of CMP (Chemical-Mechanical Planarization) technology, one of the most exciting areas in the field of semiconductor technology. It contains detailed discussions of all aspects of the technology, for both dielectrics and metals. The state of polishing models and their relation to experimental results are covered. Polishing tools and consumables are also covered. The leading edge issues of damascene and new dielectrics as well as slurryless technology are discussed.