Download or read book Guidelines for Vapor Release Mitigation written by Richard W. Prugh and published by John Wiley & Sons. This book was released on 2010-09-16 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Vapor Release Mitigation is a survey of current industrial practice for controlling accidental releases of hazardous vapors and preventing their escape from the source area.

Download or read book Guidelines for Postrelease Mitigation Technology in the Chemical Process Industry written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-17 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book puts together a body of very recent information never before presented in one volume on the design of post-release mitigation systems. The development of a fundamental knowledge base on post-release mitigation systems, through testing and data correlation, is very new. While further research and development is needed, this practical work offers guidance on putting post-release countermeasures to work now. The book presents current engineering methods for minimizing the consequences of the release of toxic vapors, or ignition of flammable vapors, including passive and active systems intended to reduce or eliminate significant acute effects of a dispersing vapor cloud in the plant facility, or into the surrounding community. As in all CCPS works, the book emphasizes planning and a systems approach, shows limitations of any methods discussed, and provides numerous references so that the reader may continue to learn.

Download or read book Guidelines for Postrelease Mitigation Technology in the Chemical Process Industry written by American Institute of Chemical Engineers. Center for Chemical Process Safety and published by Wiley-AIChE. This book was released on 1996-12-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Members of the Center for Chemical Process Safety describe the current engineering practices for minimizing the consequences when toxic vapors or the ignition of flammable vapors have been accidently released despite the prevention methods they have previously identified. They focus on post-release systems, either passive such as dikes or berms around storage tanks; or active such as water-spray, deluge, or spraying foam. They do not cover fire fighting, blast protection, or environmental control of response methods Covers release scenarios, reducing vaporization, fluid curtains, secondary containment, detection and response, and examples of mitigation effectiveness. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

Download or read book Guidelines for Technical Planning for On Site Emergencies written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prevention, preparedness, response and recovery--the key components of emergency planning--form the major sections of this work. The book first describes PSM (Process Safety Management) as the key to prevention, then goes on to consider the main features of a preparedness program, including recognizing credible incidents, planning practical strategy to deal with these incidents, selecting necessary physical support systems and equipment, and developing a complete emergency response plan. The Response section presents the functions implemented during an actual emergency and concludes with a section on managing cleanup and restoration of operations. The many tables and figures include Sample Incident Command System Plans for both large and small organizations, OSHA and EPA regulations affecting planning, sample Fire Emergency Action Levels, HAZMAT Responder Levels, and OSHA Emergency Training Requirements.

Download or read book Understanding Atmospheric Dispersion of Accidental Releases written by George E. Devaull and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief introduction to a complex topic, giving a description of the processes involved in an accidental or emergency release and the resulting downwind transport and dilution of gases, vapors, and aerosols.

Download or read book Estimating the Flammable Mass of a Vapor Cloud written by John L. Woodward and published by John Wiley & Sons. This book was released on 2010-09-17 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This CCPS Concept book shows designers and operators of chemical facilities how to realistically estimate the flammable mass in a cloud of accidentally released material that is capable of igniting. It provides information on industry experience with flammable vapor clouds, basic concepts of fires and explosions, and an overview of related computer programs.

Download or read book Lees Process Safety Essentials written by Sam Mannan and published by Butterworth-Heinemann. This book was released on 2013-11-12 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lees' Process Safety Essentials is a single-volume digest presenting the critical, practical content from Lees' Loss Prevention for day-to-day use and reference. It is portable, authoritative, affordable, and accessible — ideal for those on the move, students, and individuals without access to the full three volumes of Lees'. This book provides a convenient summary of the main content of Lees', primarily drawn from the hazard identification, assessment, and control content of volumes one and two. Users can access Essentials for day-to-day reference on topics including plant location and layout; human factors and human error; fire, explosion and toxic release; engineering for sustainable development; and much more. This handy volume is a valuable reference, both for students or early-career professionals who may not need the full scope of Lees', and for more experienced professionals needing quick, convenient access to information. Boils down the essence of Lees'—the process safety encyclopedia trusted worldwide for over 30 years Provides safety professionals with the core information they need to understand the most common safety and loss prevention challenges Covers the latest standards and presents information, including recent incidents such as Texas City and Buncefield

Download or read book Guidelines for Process Equipment Reliability Data with Data Tables written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-16 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book supplements Guidelines for Chemical Process Quantitative Risk Analysis by providing the failure rate data needed to perform a chemical process quantitative risk analysis.

Download or read book Guidelines for Safe Storage and Handling of Reactive Materials written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: With new and growing interest in dealing with the hazards of reactive chemicals, this book offers guidelines that can significantly reduce the risk or mitigate the severity of accidents associated with storing and handling reactive materials. Necessary elements of a reliable system to prevent equipment or human failures that might lead to a reactive chemical incident are sound and responsible management policies, together with a combination of superior siting, design, fabrication, erection, inspection, monitoring, maintenance, operations and maintenance of facilities. These Guidelines deal with all of these elements with emphasis on design considerations.

Download or read book Concentration Fluctuations and Averaging Time in Vapor Clouds written by David J. Wilson and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes to more reliable and realistic predictions by focusing on sampling times from a few seconds to a few hours. Its objectives include developing clear definitions of statistical terms, such as plume sampling time, concentration averaging time, receptor exposure time, and other terms often confused with each other or incorrectly specified in hazard assessments; identifying and quantifying situations for which there is no adequate knowledge to predict concentration fluctuations in the near-field, close to sources, and far downwind where dispersion is dominated by atmospheric turbulence; identifying areas where further information is required to define concentration variability statistics; and formulating an operation model for concentration fluctuations based on the current state of knowledge of dispersion processes.

Download or read book Safe Design and Operation of Process Vents and Emission Control Systems written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2006-04-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process vent header collection systems are subject to continually varying compositions and flow rates and thus present significant challenges for safe design. Due to increasingly demanding safety, health, environmental, and property protection requirements, today's industrial designers are faced with the need to create increasingly complex systems for more effective treatment, dispersal, or disposal of process gases. Safe Design and Operation of Process Vents and Emission Control Systems provides cutting-edgeguidance for the design, evaluation, and operation of these systems, with emphasis on: Preventing fires, explosions, and toxic releases Maintaining safe vent conditions Understanding normal process operations, such as intentional routine controlled venting and emergency operations, like overpressure relief Mitigating the impacts of end-of-line treatment devices, such as scrubbers, flares, and thermal oxidizers, on the vent header system Complying with regulations Written by a team of process safety experts from the chemical, pharmaceutical, and petroleum industries, the book includes a wealth of real-world examples and a thorough overview of the tools and methods used in the profession.

Download or read book Guidelines for Evaluating Process Plant Buildings for External Explosions and Fires written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dedicated to the Memory and Spirit of Donald F. Othmer Though there are many industry practices for building design and siting, they do not always apply to all sectors of the industry, or ensure consistent levels of safety. This practical book, written by the same author as API Recommended Practice 752, provides the details to implement the recommended practice, "Management of Hazards Associated with Location of Process Plant Buildings." Its contents include safety guidelines on fire and explosion risks to process plant buildings as a result of events external to the building, which can apply across the spectrum of industries, and to conditions at any site. The book also offers guidance on assessing, screening, and managing risks associated with building design and siting. Two appendices give extensive coverage of explosion and fire phenomena, and effects and principles of blast-resistant design.

Download or read book Guidelines for Safe Storage and Handling of High Toxic Hazard Materials written by Richard LeVine and published by . This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Contractor and Client Relations to Assure Process Safety written by William F. Early, II and published by John Wiley & Sons. This book was released on 2010-09-07 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written and edited by engineering contractors and industry project/maintenance managers as an easy-to-use guide for other industry professionals, this book identifies important process safety issues in the contractor-client relationship,which are not addressed by other groups and publications. While the issues may arise at any point in the life cycle of a plant, they should be resolved early in the relationship to permit a clearer focus on process safety issues. Topics covered are a general discussion of contractor safety programs; EPC (engineering, procurement, construction) contractual bases and work division as they address regulatory PSM issues; subcontractor relationships; and managing contractor-client risks.

Download or read book Albright s Chemical Engineering Handbook written by Lyle Albright and published by CRC Press. This book was released on 2008-11-20 with total page 1930 pages. Available in PDF, EPUB and Kindle. Book excerpt: From fundamentals to plant operations, Albright's Chemical Engineering Handbook offers a thorough, yet succinct guide to day-to-day methods and calculations used in chemical engineering applications. Leaders from an exceptional diversity of specialties provide a clear review of basic information, case examples, and references to additional information. They discuss essential principles, calculations, and key issues such as reaction engineering, process control and design, waste disposal, and electrochemical and biochemical engineering. The final chapters cover aspects of patents, intellectual property, communications, and ethics that are most relevant to engineers.

Download or read book Chemical Process Safety written by Daniel A. Crowl and published by Pearson Education. This book was released on 2001-10-16 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines academic theory with practical industry experience Updated to include the latest regulations and references Covers hazard identification, risk assessment, and inherent safety Case studies and problem sets enhance learning Long-awaited revision of the industry best seller. This fully revised second edition of Chemical Process Safety: Fundamentals with Applications combines rigorous academic methods with real-life industrial experience to create a unique resource for students and professionals alike. The primary focus on technical fundamentals of chemical process safety provides a solid groundwork for understanding, with full coverage of both prevention and mitigation measures. Subjects include: Toxicology and industrial hygiene Vapor and liquid releases and dispersion modeling Flammability characterization Relief and explosion venting In addition to an overview of government regulations, the book introduces the resources of the AICHE Center for Chemical Process Safety library. Guidelines are offered for hazard identification and risk assessment. The book concludes with case histories drawn directly from the authors' experience in the field. A perfect reference for industry professionals, Chemical Process Safety: Fundamentals with Applications, Second Edition is also ideal for teaching at the graduate and senior undergraduate levels. Each chapter includes 30 problems, and a solutions manual is now available for instructors.