Download or read book Guidelines for Process Equipment Reliability Data with Data Tables written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-16 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book supplements Guidelines for Chemical Process Quantitative Risk Analysis by providing the failure rate data needed to perform a chemical process quantitative risk analysis.
Download or read book Guidelines for Process Equipment Reliability Data with Data Tables written by and published by . This book was released on 1989 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book supplements Guidelines for Chemical Process Quantitative Risk Analysis by providing the failure rate data needed to perform a chemical process quantitative risk analysis.
Download or read book Guidelines for Process Equipment Reliability Data with Data Tables written by American Institute of Chemical Engineers. Center for Chemical Process Safety and published by Wiley-AIChE. This book was released on 1989-02-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book supplements Guidelines for Chemical Process Quantitative Risk Analysis by providing the failure rate data needed to perform a chemical process quantitative risk analysis.
Download or read book Guidelines for Process Safety Documentation written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process industry has developed integrated process safety management programs to reduce or eliminate incidents and major consequences, such as injury, loss of life, property damage, environmental harm, and business interruption. Good documentation practices are a crucial part of retaining past knowledge and experience, and avoiding relearning old lessons. Following an introduction, which offers examples of how proper documentation might have prevented major explosions and serious incidents, the 21 sections in this book clearly present aims, goals, and methodology in all areas of documentation. The text contains examples of dozens of needed forms, lists of relevant industry organizations, sources for software, references, OSHA regulations, sample plans, and more.
Download or read book Guidelines for Design Solutions for Process Equipment Failures written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there is no "perfect" solution or absolute zero risk, engineering design can significantly reduce risk potential in the CPI. In Guidelines for Design Solutions to Process Equipment Failures, industry experts offer their broad experience in identifying numerous solutions to the more common process equipment failures including inherent safer/passive, active, and procedural solutions, in decreasing order of robustness and reliability. The book challenges the engineer to identify opportunities for inherent and passive safety features early, and use a risk-based approach to process safety systems specification. The book is organized into three basic sections: 1) a technique for making risk-based design decisions; 2) potential failure scenarios for 10 major processing equipment categories; and 3) two worked examples showing how the techniques can be applied. The equipment categories covered are: vessels, reactors, mass transfer equipment, fluid transfer equipment, solids-fluid separators, solids handling and processing equipment, and piping and piping components. Special Details: Hardcover book plus 3.5" diskette for use in any word processing program with design solutions for use in PHAs.
Download or read book Guidelines for Initiating Events and Independent Protection Layers in Layer of Protection Analysis written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2015-02-03 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a guide for Layers of Protection Analysis (LOPA)practitioners. It explains the onion skin modeland in particular, how it relates to the use of LOPA and the needfor non-safety instrumented independent protection layers. Itprovides specific guidance on Independent Protection Layers (IPLs)that are not Safety Instrumented Systems (SIS). Using theLOPA methodology, companies typically take credit for riskreductions accomplished through non-SIS alternatives; i.e.administrative procedures, equipment design, etc. Itaddresses issues such as how to ensure the effectiveness andmaintain reliability for administrative controls or“inherently safer, passive” concepts. This book will address how the fields of Human ReliabilityAnalysis, Fault Tree Analysis, Inherent Safety, Audits andAssessments, Maintenance, and Emergency Response relate to LOPA andSIS. The book will separate IPL’s into categories such as thefollowing: Inherent Safety eliminates a scenario or fundamentally reduces a hazard Preventive/Proactive prevents initiating event from occurring such as enhancedmaintenance Preventive/Active stops chain of events after initiating event occurs but beforean incident has occurred such as high level in a tank shutting offthe pump. Mitigation (active or passive) minimizes impact once an incident has occurred such as closingblock valves once LEL is detected in the dike (active) or the dikepreventing contamination of groundwater (passive).
Download or read book Revalidating Process Hazard Analyses written by Walter L. Frank and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The foundation of any successful process safety program is a current set of process hazard analyses (PHAs) for each of its processes. Revalidating PHAs to keep them up to date and applicable is a must. This book is derived from the experience of many companies in the chemical and hydrocarbon processing industries, and presents demonstrated, concise, and common sense approaches for a resource-effective revalidation of PHAs. It includes flowcharts, checklists, and worksheets that provide invaluable assistance to the revalidation process.
Download or read book Reverse Osmosis Seawater Desalination Volume 1 written by Heinz Ludwig and published by Springer Nature. This book was released on 2022-10-29 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seawater reverse osmosis (SWRO) is the dominant desalination process worldwide for obtaining fresh water from the sea. The subject matter and scope of this book is the conceptual and advanced planning, design and engineering of plants of this desalination process together with the associated facilities for seawater pretreatment, post-treatment of the product water, wastewater treatment, seawater extraction and plant discharge. The book is intended to be used by technicians, engineers, economists and ecologists in the planning, design and operation of SWRO plants, as an educational and training tool, as well as an aid in environmental licensing of membrane desalination plants, and by interested laypersons for information about this process. The two volumes are also available as a set.
Download or read book RELEASE written by David W. Johnson and published by John Wiley & Sons. This book was released on 2010-09-17 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents CCPS's Aerosol Research Program to develop a model to predict liquid rainout from release of a pressurized, liquefied gas--and, hence the residual amount of material in a vapor cloud, which may be greater than the amount calculated from an enthalpy chart. RELEASE predicts the rate of fluid discharge, the depressurization, flashing and formation of liquid drops, the entrainment of drops into the vapor cloud, the subsequent spreading of the jet, and rate of liquid rainout to a pool on the ground. Designed in a modular fashion to permit adjustment and corrections as new data become available, its multi-layered approach contains sub-models that include the complexities of many variables, including the effect of liquid superheat, rate of bubble growth, criterion for bubble formation, and heat transfer from the liquid to the growing vapor bubble. To validate RELEASE, CCPS conducted small- and large-scale experiments using superheated water, heated liquefied chlorine, methylamine, and cyclohexane that produced valuable data in an area where data are scarce. This book gives complete access, in text and on CD-ROM, to the model and the test data, giving users an informed ability to apply the model to their own work.
Download or read book Contractor and Client Relations to Assure Process Safety written by William F. Early, II and published by John Wiley & Sons. This book was released on 2010-09-07 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written and edited by engineering contractors and industry project/maintenance managers as an easy-to-use guide for other industry professionals, this book identifies important process safety issues in the contractor-client relationship,which are not addressed by other groups and publications. While the issues may arise at any point in the life cycle of a plant, they should be resolved early in the relationship to permit a clearer focus on process safety issues. Topics covered are a general discussion of contractor safety programs; EPC (engineering, procurement, construction) contractual bases and work division as they address regulatory PSM issues; subcontractor relationships; and managing contractor-client risks.
Download or read book Deflagration and Detonation Flame Arresters written by Stanley S. Grossel and published by John Wiley & Sons. This book was released on 2010-08-26 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for chemical engineers and other technical personnel involved in the design, operation, and maintenance of facilities and equipment where deflagration and detonation flame arresters (DDFAs) may be required, this book fosters effective application and operation of DDFAs through treatment of their principles of operation, selection, installation, and maintenance methods. This reference covers a broad range of issues concerning DDAs, including: An overview of deflagration and detonation prevention and protection practices An overview of combustion and flame propagation and how DDAs halt propagation Deflagration and detonation flame arrester technology Installation in process systems Regulations, codes, and standards Illustrative examples, calculations, and guidelines for DDA selection Appendices, including a glossary, a flame arrester specification sheet for vendor quotation, and a listing of flame arrester manufacturers.
Download or read book Understanding Explosions written by Daniel A. Crowl and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many different types of explosions, each with its own complex mechanism. Understanding explosions is important in preventing them. This reference provides valuable information on explosions for everyone involved in the operation, design, maintenance, and management of chemical processes, helping enhance understanding of the nature of explosions and the practical methods required to prevent them from occurring. The text includes: Fundamental basis for explosions Explosive and flammable behavior and characteristics of materials Different types of explosions Fire and explosion hazard recognition Practical methods for preventing explosions or minimizing the potential consequences Additional references Understanding Explosions provides a practical understanding of explosion fundamentals, including the different types of explosions, the explosive and flammable behavior of materials, and the hazards related to fires and explosions. It also discusses practical methods to prevent and minimize the probability and consequence of an explosion during routine use of flammable, combustible and/or reactive materials.
Download or read book Process Safety written by Pol Hoorelbeke and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-05-10 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author describes the history of industrial safety and the emergence of process safety as an engineering discipline in the 20th century. The book sheds light on the difference between:
Download or read book Recognizing Catastrophic Incident Warning Signs in the Process Industries written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2013-07-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on characterizing, recognizing, and responding to warning signs to help avoid process incidents and injuries before they occur. The guidance can be used by both process safety management (PSM) professionals in evaluating their processes and PSM systems as well as for operators who are often the frontline defense against process incidents. Warning signs may consist of process deviations or upsets, instrumentation warnings or alarms, past operating history and incidents, observable problems such as corrosion or unusual odors, audit results indicating procedures are not being followed, or a number of other indicators. Filled with photos and practical tips, this book will turn anyone in a process plant into a hazard lookout and will help prevent potential incidents before they turn into catastrophic events.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-13 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Bottom line: For a holistic view of chemical engineering design, this book provides as much, if not more, than any other book available on the topic.' Extract from Chemical Engineering Resources review. Chemical Engineering Design is a complete course text for students of chemical engineering. Written for the Senior Design Course, and also suitable for introduction to chemical engineering courses, it covers the basics of unit operations and the latest aspects of process design, equipment selection, plant and operating economics, safety and loss prevention. It is a textbook that students will want to keep through their undergraduate education and on into their professional lives.
Download or read book Chemical Engineering Design written by Ray Sinnott and published by Elsevier. This book was released on 2009-05-15 with total page 1279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design is one of the best-known and most widely adopted texts available for students of chemical engineering. It completely covers the standard chemical engineering final year design course, and is widely used as a graduate text. The hallmarks of this renowned book have always been its scope, practical emphasis and closeness to the curriculum. That it is written by practicing chemical engineers makes it particularly popular with students who appreciate its relevance and clarity. Building on this position of strength the fifth edition covers the latest aspects of process design, operations, safety, loss prevention and equipment selection, and much more. Comprehensive in coverage, exhaustive in detail, and supported by extensive problem sets at the end of each chapter, this is a book that students will want to keep to hand as they enter their professional life. - The leading chemical engineering design text with over 25 years of established market leadership to back it up; an essential resource for the compulsory design project all chemical engineering students take in their final year - A complete and trusted teaching and learning package: the book offers a broader scope, better curriculum coverage, more extensive ancillaries and a more student-friendly approach, at a better price, than any of its competitors - Endorsed by the Institution of Chemical Engineers, guaranteeing wide exposure to the academic and professional market in chemical and process engineering.
Download or read book Safety and Reliability Methodology and Applications written by Tomasz Nowakowski and published by CRC Press. This book was released on 2014-09-01 with total page 2493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last fifty years the performance requirements for technical objects and systems were supplemented with: customer expectations (quality), abilities to prevent the loss of the object properties in operation time (reliability and maintainability), protection against the effects of undesirable events (safety and security) and the ability to
