Download or read book Growth Stresses and Strains in Trees written by Robert R. Archer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although over 40 years have passed since Jacobs (1945) convincingly established the basic radial pattern of residual growth stress in growing trees, yet this phenomenon is still not widely appreciated in wood science and technology circles. This is in spite of the fact that the presence of these stresses of sizeable magnitudes has long been recognized as a primary cause of shakes and splits in logs as well as the warping of lumber sawn in the green condition. The presentation of the subject of growth stresses in trees presents some special problems due to the wide range of specialists who potentially might have an interest in the subject. For example, tree physiologists interested in questions such as the relation of mechanical stress to stem taper and the role of reaction wood and gravity forces in determining tree crown form encounter growth stress models. Silvi culturists interested in the relation ofthinning practices to wood quality find that wood properties are correlated with growth stress levels which are in turn significantly changed by cutting practices. Wood techno logists interested in the relation of residual growth stress gradients in green logs to the dimensional quality of sawn and seasoned lumber are forced to take a more quantitative approach to the effect of growth stresses than might have been the case in the past.
Download or read book Plant Biomechanics written by Anja Geitmann and published by Springer. This book was released on 2018-06-09 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides important insights into the operating principles of plants by highlighting the relationship between structure and function. It describes the quantitative determination of structural and mechanical parameters, such as the material properties of a tissue, in correlation with specific features, such as the ability of the tissue to conduct water or withstand bending forces, which will allow advanced analysis in plant biomechanics. This knowledge enables researchers to understand the developmental changes that occur in plant organs over their life span and under the influence of environmental factors. The authors provide an overview of the state of the art of plant structure and function and how they relate to the mechanical behavior of the organism, such as the ability of plants to grow against the gravity vector or to withstand the forces of wind. They also show the sophisticated strategies employed by plants to effect organ movement and morphogenesis in the absence of muscles or cellular migration. As such, this book not only appeals to scientists currently working in plant sciences and biophysics, but also inspires future generations to pursue their own research in this area.
Download or read book Wood Variation written by Bruce J. Zobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is the usual end product of a forestry operation. Because of its importance, numerous studies have been made relative to wood prop erties, the causes of wood variation, and how best to develop wood for desired products. There is voluminous literature related to these subjects, but it is neither well known nor appreciated by foresters because the publications are often not available or are not well understood by the forester or by those who use the wood. Frequently, the literature is confusing and contradictory, making it difficult for the nonspecialist to use what information is available. In order to produce and use wood efficiently, the variation pat terns within trees, among trees within species, and among species must be understood. This also requires some knowledge of the causes of variation and the effects of different wood properties upon utiliza tion. The information about variation patterns, their causes, and con trol and effect upon the product must be known by the tree grower, the tree breeder, and the tree harvester as well as by those who ultimately convert wood into a final, salable product.
Download or read book The Supporting Roots of Trees and Woody Plants Form Function and Physiology written by A. Stokes and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication comprises the proceedings of the first International Conference devoted to the structural roots of trees and woody plants. 'The Supporting Roots - Structure and Function,' 20-24 July 1998, Bordeaux, France. The meeting was held under the auspices ofIUFRO WPS 2. 01. 13 'Root Physiology and Symbiosis,' and its aim was to bring together scientific researchers, foresters and arboriculturalists, to discuss current problems in structural root research and disseminate knowledge to an audience from a wide disciplinary background. For the first time in an international conference, emphasis was placed on presenting recent reseach in the field of tree anchorage mechanics and root biomechanics. The way in which tree stability can be affected by root system symmetry and architecture was addressed, as well as how movement during wind sway can influence the development and shape of woody roots. The role of different nursery and planting techniques was discussed, in relation to effects on root system form and development. Root response to different environmental stresses, including water, temperature, nutrient and mechanical stress was addressed in detail. The structure and function of woody roots was also considered at different levels, from coarse to fine roots, with several papers discussing the interaction between roots and the rhizosphere. One of the conference highlights was the presentation of new methods in root research, by a series of workshops held at LRBB-INRA, Pierroton, on the northern border of the Gascony forest.
Download or read book Ecology and Biomechanics written by Anthony Herrel and published by CRC Press. This book was released on 2006-01-13 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: We live in a well-engineered universe. This engineering is present in every system and organism in existence, including in the actions and interactions of plants and animals. In fact, one could say that the function and movement of plants and animals is just as much a part of their makeup as chlorophyll and fiber or bone and blood. Consequently, if
Download or read book Primary Wood Processing written by J. C. F. Walker and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily a general text covering the whole sweep of the forest industries. The over-riding emphasis is on a clear, simple interpretation of the underlying science, demonstrating how such principles apply to processing operations. The book considers the broad question "what is wood?" by looking at the biology, chemistry and physics of wood structure. Wood quality is examined, and explanations are offered on how and why wood quality varies and the implications for processing. Finally, various "industrial processes" are reviewed and interpreted. All chapters have been written by specialists, but the presentation targets a generalist audience.
Download or read book Wood Quality and its Biological Basis written by John Barnett and published by John Wiley & Sons. This book was released on 2009-02-18 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is the most versatile raw material available to man. It isburned as fuel, shaped into utensils, used as a structuralengineering material, converted into fibres for paper production,and put to newer uses as a source of industrial chemicals. Its quality results largely from the chemical and physicalstructure of the cell walls of its component fibres, which can bemodified in nature as the tree responds to physical environmentalstresses. Internal stresses can accumulate, which are releasedcatastrophically when the tree is felled, often rendering thetimber useless. The quality of timber as an engineering materialalso depends on the structure of the wood and the way in which ithas developed in the living tree. Tree improvement for quality cannot be carried out without anunderstanding of the biological basis underlying wood formation andstructure. This volume brings together the viewpoints of bothbiologists and physical scientists, covering the spectrum from theformation of wood to its structure and properties, and relatingthese properties to industrial use. This is a volume for researchers and professionals in plantphysiology, molecular biology and biochemistry.
Download or read book Primary Wood Processing written by John C.F. Walker and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily a general text covering the whole sweep of the forest industries. The over-riding emphasis is on a clear, simple interpretation of the underlying science, demonstrating how such principles apply to processing operations. The book considers the broad question "what is wood?" by looking at the biology, chemistry and physics of wood structure. Wood quality is examined, and explanations are offered on how and why wood quality varies and the implications for processing. Finally, various "industrial processes" are reviewed and interpreted. All chapters have been written by specialists, but the presentation targets a generalist audience.
Download or read book Wood is Good written by Krishna K. Pandey and published by Springer. This book was released on 2017-01-20 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers presented in the International Conference on the theme ‘Wood is Good: Current Trends and Future Prospects in Wood’. The contents of the book deal with recent innovations, trends and challenges in wood science and are grouped in five distinct sections. They cover a wide range of topics like wood variability, processing and utilization, wood protection, wood-based composites, wood energy and the role of wood in mitigating climate change. With the ever increasing human population and growing demand for wood, this book offers valuable insights for better understanding and efficient utilization of this wonderful gift of nature. This book will be useful to researchers, professionals, and policy makers involved in forestry and wood related areas.
Download or read book Australian Forestry written by and published by . This book was released on 2005 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Horticultural Reviews Volume 32 written by Jules Janick and published by John Wiley & Sons. This book was released on 2010-04-07 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horticultural Reviews presents state-of-the-art reviews on topics in the horticultural sciences. The emphasis is on applied topics including the production of fruits, vegetables, nut crops, and ornamental plants of commerical importance. The title appears in the form of two volumes per year. These articles perform the valuable function of collecting, comparing, and contrasting the primary journal literature in order to form an overview of the topic. This detailed analysis bridges the gap between the specialized researcher and the broader community of horticultural scientists.
Download or read book Size and Age Related Changes in Tree Structure and Function written by Frederick C. Meinzer and published by Springer Science & Business Media. This book was released on 2011-06-29 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Millions of trees live and grow all around us, and we all recognize the vital role they play in the world’s ecosystems. Publicity campaigns exhort us to plant yet more. Yet until recently comparatively little was known about the root causes of the physical changes that attend their growth. Since trees typically increase in size by three to four orders of magnitude in their journey to maturity, this gap in our knowledge has been a crucial issue to address. Here at last is a synthesis of the current state of our knowledge about both the causes and consequences of ontogenetic changes in key features of tree structure and function. During their ontogeny, trees undergo numerous changes in their physiological function, the structure and mechanical properties of their wood, and overall architecture and allometry. This book examines the central interplay between these changes and tree size and age. It also explores the impact these changes can have, at the level of the individual tree, on the emerging characteristics of forest ecosystems at various stages of their development. The analysis offers an explanation for the importance of discriminating between the varied physical properties arising from the nexus of size and age, as well as highlighting the implications these ontogenetic changes have for commercial forestry and climate change. This important and timely summation of our knowledge base in this area, written by highly respected researchers, will be of huge interest, not only to researchers, but also to forest managers and silviculturists.
Download or read book Timber written by H.E. Desch and published by Bloomsbury Publishing. This book was released on 2016-01-09 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the sixth edition of this classic text/reference was published in 1981, there have been so many developments in the field that the new seventh edition represents an almost total rewrite of the subject matter. The opportunity has been taken to rearrange the structure and broaden the scope to cover areas of conversion, machining and the application of paints and finishes; the format has also been enlarged to improve readability. Part 1 contains chapters that deal with the structure of wood at the gross, cellular and molecular levels; variability is also covered. Part 2 has five chapters on the properties of wood, with special coverage of elastic behaviour, toughness and the use of structural-sized timber for strength tests. Part 3 on processing has material on several new areas not covered in earlier editions of the book; for example, log conversion, seasoning, and the machining of wood and board. The discussion of grading and grade stresses is fully updated. Part 4 on utilisation examines the latest techniques and standards for the manufacture of wood products. Part 5 examines all aspects of timber in service, including protection and preservation. The book will appeal to a wide readership, both as a student text and reference. Students of wood science and forestry at undergraduate and equivalent level will find it of special value. All institutions with courses in the built environment will wish to make the book available as a reference source.
Download or read book Juvenile Wood in Forest Trees written by Bruce J. Zobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trend in forestry is toward shorter rotations and more complete utiliza tion of trees. The reasons are: (1) financial pressures to obtain rapid returns on the forestry investment made possible by an earlier harvest; (2) enforced harvest of young plantations to maintain a continuing supply of cellulose for mills where wood shortages are experienced; (3) thinning young plantations, both because they were planted too densely initially and because thinning is done where long rotation quality trees are the forestry goal; (4) more intensive utilization is being done using tops and small diameter trees; and (5) there is interest in using young (juvenile) wood for special products because of its unique characteristics and the development of new technologies. The largest present-day source of conifer juvenile wood is from thinnings of plantations where millions of hectares of pine were planted too densely. Because of the better growth rate resulting from improved silviculture and good genetic stock, plantations will need to be thinned heavily. As a result of this trend, young wood makes up an increasingly larger proportion of the total conifer wood supply each year. Large amounts of juvenile wood from hard woods are also currently available, especially in the tropics and subtropics, because of the fast growth rate of the species used, which results in shorter rotations and ess~ntially all juvenile wood.
Download or read book Issues in Forestry Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Forestry Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Forestry Research and Application. The editors have built Issues in Forestry Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Forestry Research and Application in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Forestry Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Trees and Wood in Dendrochronology written by Fritz H. Schweingruber and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of dendrochronology has grown significantly in the past 20 years. In the 1950s and 1960s, interest in the subject was limited to only a handful of scientists who perceived in dendrochronology a "l'art pour l'art". Today, however, specialists from many different fields recognize and are pursuing the problems of dendrochronology. Tree-ring research has acquired a permanent role in the various sciences of archeology, history, geology, ecology, and climatology. The founders of dendrochronology themselves were of varied scientific backgrounds and interests. For example, A. E. Douglass in the United States was an astronomer, B. Huber in Germany a forest-biologist, and F. N. Shvedov in Russia a climatologist. Today the spectrum is even broader. Many den drochronologists are authorities in mathematics, archeology, history, forestry, botany, wood technology, ecology geography, geology, etc. It is, therefore, understandable that it has become almost impossible for one individual to encompass the entire field. Bitvinskas (1974), Fritts (1976), Schweingruber (1983), and Mitsutani (1990) have attempted, each guided by his own interests, to provide at least an overview of the field. Recently, individual aspects have been presented by groups of authors in books edited by Fletscher (1978), Hughes et al. (1982), Jacoby and Hornbeck (1987) and Bradley and Jones (1992). It is very likely that in the future summaries covering each branch of dendrochronology will be published.
Download or read book Bio Based Building Materials written by Sofiane Amziane and published by Springer Nature. This book was released on 2023-07-15 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 5th International Conference on Bio-Based Building Materials (ICBBM), held in Vienna, Austria, on June 21-23, 2023. Focusing on bio-based building materials (3BM) as well as their applications in sustainable building constructions, the contributions highlight the latest findings in this fast-growing field, addressing topics such as natural fibres- and aggregates, ramped earth, innovative hybrid composites based on bio-based ingredients, novel sustainable binders, energy efficiency aspects- and life cycle analysis of these materials.
