Download or read book Advanced Nanoelectronics written by Razali Ismail and published by CRC Press. This book was released on 2018-09-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: While theories based on classical physics have been very successful in helping experimentalists design microelectronic devices, new approaches based on quantum mechanics are required to accurately model nanoscale transistors and to predict their characteristics even before they are fabricated. Advanced Nanoelectronics provides research information on advanced nanoelectronics concepts, with a focus on modeling and simulation. Featuring contributions by researchers actively engaged in nanoelectronics research, it develops and applies analytical formulations to investigate nanoscale devices. The book begins by introducing the basic ideas related to quantum theory that are needed to better understand nanoscale structures found in nanoelectronics, including graphenes, carbon nanotubes, and quantum wells, dots, and wires. It goes on to highlight some of the key concepts required to understand nanotransistors. These concepts are then applied to the carbon nanotube field effect transistor (CNTFET). Several chapters cover graphene, an unzipped form of CNT that is the recently discovered allotrope of carbon that has gained a tremendous amount of scientific and technological interest. The book discusses the development of the graphene nanoribbon field effect transistor (GNRFET) and its use as a possible replacement to overcome the CNT chirality challenge. It also examines silicon nanowire (SiNW) as a new candidate for achieving the downscaling of devices. The text describes the modeling and fabrication of SiNW, including a new top-down fabrication technique. Strained technology, which changes the properties of device materials rather than changing the device geometry, is also discussed. The book ends with a look at the technical and economic challenges that face the commercialization of nanoelectronics and what universities, industries, and government can do to lower the barriers. A useful resource for professionals, researchers, and scientists, this work brings together state-of-the-art technical and scientific information on important topics in advanced nanoelectronics.
Download or read book Ceramic Integration and Joining Technologies written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book joins and integrates ceramics and ceramic-based materials in various sectors of technology. A major imperative is to extract scientific information on joining and integration response of real, as well as model, material systems currently in a developmental stage. This book envisions integration in its broadest sense as a fundamental enabling technology at multiple length scales that span the macro, millimeter, micrometer and nanometer ranges. Consequently, the book addresses integration issues in such diverse areas as space power and propulsion, thermoelectric power generation, solar energy, micro-electro-mechanical systems (MEMS), solid oxide fuel cells (SOFC), multi-chip modules, prosthetic devices, and implanted biosensors and stimulators. The engineering challenge of designing and manufacturing complex structural, functional, and smart components and devices for the above applications from smaller, geometrically simpler units requires innovative development of new integration technology and skillful adaptation of existing technology.
Download or read book Synthesis of Nanomaterials written by S. Noor Mohammad and published by Springer Nature. This book was released on 2020-10-27 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the synthesis of nanomaterials with a strong focus on the underlying reaction kinetics and various synthesis mechanisms. It gives a detailed description of all major synthesis routes of many types of novel nanomaterials including nanowires, carbon nanotubes, semiconductor nanotubes, carbon nanobelts, nanofibers, nanorings, nanodots and quantum dots. In addition, it articulates the fundamental mechanisms of nanomaterials synthesis via vapor-phase, liquid-phase and solid-phase processes, highlighting the various strengths and weaknesses of each mechanism. This monograph provides the reader with a thorough review of the known state-of-the-art, along with a detailed comparison and analysis of all possible nanomaterials synthesis mechanisms. An important element of the book is how to obtain critical knowledge for controlling the morphology of nanomaterials and thereby fine tune their materials properties. The book is an ideal guide for graduate students and researchers new to the field seeking to establish or enhance their understanding of the physical and chemical fundamentals of nanomaterials synthesis mechanisms.
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
Download or read book Deterministic Germanium Nanowire Growth written by Jacob Huffman Woodruff and published by . This book was released on 2007 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on Nanoscience Nanotechnology and Advanced Materials written by Bououdina, Mohamed and published by IGI Global. This book was released on 2014-03-31 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The burgeoning field of nanotechnology has led to many recent technological innovations and discoveries. Understanding the impact of these technologies on business, science, and industry is an important first step in developing applications for a variety of settings and contexts. Handbook of Research on Nanoscience, Nanotechnology, and Advanced Materials presents a detailed analysis of current experimental and theoretical approaches surrounding nanomaterials science. With applications in fields such as biomedicine, renewable energy, and synthetic materials, the research in this book will provide experimentalists, professionals, students, and academics with an in-depth understanding of nanoscience and its impact on modern technology.
Download or read book UV VIS and Photoluminescence Spectroscopy for Nanomaterials Characterization written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-02-19 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second volume of a 40-volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about UV-visible and photoluminescence spectroscopy for the characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume essential reading for research scientists in academia and industry in the related fields.
Download or read book Chemistry of Semiconductors written by Sergio Pizzini and published by Royal Society of Chemistry. This book was released on 2023-11-24 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon, germanium, and compound semiconductors, among which silicon carbide, gallium arsenide and gallium nitride are the most representative examples, play a withstanding role in the world economy, since they were and still are the keys for the advancement of modern microelectronics and optoelectronics, with a wealth of sister technologies relevant for renewable energy solutions and advanced spectroscopy applications. This textbook will cover the synthesis, spectroscopic characterisation and optimisation of semiconductor materials, accounting for the most recent developments in the field of nanomaterials. It will be of great interest for scholars and instructors to have the chance to look at semiconductor science with a basic chemical approach. Homopolar semiconductors (silicon and germanium) are examined first, considering the role of these materials in modern microelectronics and in photovoltaics. Compound semiconductors (for example, carbides, arsenides, tellurides, nitrides) are also discussed in detail, considering that the chemistry of their preparation is even more critical and their role in photonic applications is strategic. Authored by a leading expert in the field, this easily accessible text is appropriate for advanced undergraduates and postgraduates studying materials science and technology.
Download or read book Semiconductor Nanomaterials written by Challa S. S. R. Kumar and published by John Wiley & Sons. This book was released on 2010-04-05 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series Nanomaterials for the Life Sciences, provides an in-depth overview of all nanomaterial types and their uses in the life sciences. Each volume is dedicated to a specific material class and covers fundamentals, synthesis and characterization strategies, structure-property relationships and biomedical applications. The series brings nanomaterials to the Life Scientists and life science to the Materials Scientists so that synergies are seen and developed to the fullest. Written by international experts of various facets of this exciting field of research, the series is aimed at scientists of the following disciplines: biology, chemistry, materials science, physics, bioengineering, and medicine, together with cell biology, biomedical engineering, pharmaceutical chemistry, and toxicology, both in academia and fundamental research as well as in pharmaceutical companies. VOLUME 6 - Semiconductor Nanomaterials
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2004-01-19 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.
Download or read book Fundamental Properties of Semiconductor Nanowires written by Naoki Fukata and published by Springer Nature. This book was released on 2020-11-16 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all aspects of semiconductor nanowires, from growth to related applications, in detail. First, it addresses nanowires’ growth mechanism, one of the most important topics at the forefront of nanowire research. The focus then shifts to surface functionalization: nanowires have a high surface-to-volume ratio and thus are well-suited to surface modification, which effectively functionalizes them. The book also discusses the latest advances in the study of impurity doping, a crucial process in nanowires. In addition, considerable attention is paid to characterization techniques such as nanoscale and in situ methods, which are indispensable for understanding the novel properties of nanowires. Theoretical calculations are also essential to understanding nanowires’ characteristics, particularly those that derive directly from their special nature as one-dimensional nanoscale structures. In closing, the book considers future applications of nanowire structures in devices such as FETs and lasers.
Download or read book Nanotubes and Nanofibers written by Yury Gogotsi and published by CRC Press. This book was released on 2006-06-20 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Size, Shape, and Synthesis Key toTuning Properties The discovery and rapid evolution of carbon nanotubes have led to a vastly improved understanding of nanotechnology, as well as dozens of possible applications for nanomaterials of different shapes and sizes ranging from composites to biology, medicine, energy, transportation, a
Download or read book Catalyst Electrodeposition Into Silicon Microcrucibles with Subsequent Vapor Phase Germanium Deposition written by Jeffrey L. Jensen and published by . This book was released on 2009 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics written by and published by Elsevier. This book was released on 2008-10-09 with total page 1037 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Handbook of Surface Science covers all aspects of the dynamics of surface processes. Two dozen world leading experts in this field address the subjects of energy exchange in gas atoms, surface collisions, the rules governing dissociative adsorption on surfaces, the formation of nanostructures on surfaces by self-assembly, and the study of surface phenomena using ultra-fast lasers. The chapters are written for both newcomers to the field as well as researchers.• Covers all aspects of the dynamics of surface processes • Provides understanding of this unique field utilizing a multitude of accurate experiments and advanced microscopic theory that allows quantum-level comparisons • Presents the concepts and tools relevant beyond surface science for catalysis, nanotechnology, biology, medicine, and materials
Download or read book Microelectronics to Nanoelectronics written by Anupama B. Kaul and published by CRC Press. This book was released on 2017-12-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composed of contributions from top experts, Microelectronics to Nanoelectronics: Materials, Devices and Manufacturability offers a detailed overview of important recent scientific and technological developments in the rapidly evolving nanoelectronics arena. Under the editorial guidance and technical expertise of noted materials scientist Anupama B. Kaul of California Institute of Technology’s Jet Propulsion Lab, this book captures the ascent of microelectronics into the nanoscale realm. It addresses a wide variety of important scientific and technological issues in nanoelectronics research and development. The book also showcases some key application areas of micro-electro-mechanical-systems (MEMS) that have reached the commercial realm. Capitalizing on Dr. Kaul’s considerable technical experience with micro- and nanotechnologies and her extensive research in prestigious academic and industrial labs, the book offers a fresh perspective on application-driven research in micro- and nanoelectronics, including MEMS. Chapters explore how rapid developments in this area are transitioning from the lab to the market, where new and exciting materials, devices, and manufacturing technologies are revolutionizing the electronics industry. Although many micro- and nanotechnologies still face major scientific and technological challenges and remain within the realm of academic research labs, rapid advances in this area have led to the recent emergence of new applications and markets. This handbook encapsulates that exciting recent progress by providing high-quality content contributed by international experts from academia, leading industrial institutions—such as Hewlett-Packard—and government laboratories including the U.S. Department of Energy’s Sandia National Laboratory. Offering something for everyone, from students to scientists to entrepreneurs, this book showcases the broad spectrum of cutting-edge technologies that show significant promise for electronics and related applications in which nanotechnology plays a key role.
Download or read book Current Topics in Materials Science written by E. Kaldis and published by North Holland. This book was released on 1982-01-01 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt:
