Download or read book Grid based DEM Generation Using Existing DEM Information written by Fahd A. Abanmy and published by . This book was released on 1996 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Elevation Model Technologies and Applications written by David Francis Maune and published by American Society for Photogrammetry & Remote Sensing. This book was released on 2007 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This DE Users Manual is designed to help potential users of digital elevation data understand and articulate their requirements in a way that their expectations are satisfied. if you have a dream that DEM's can help you do a better job, or you need to know more about DEM technologies and applications then this manual is for you.
Download or read book CAPIR DEM A Collection System for Geographically Based Digital Elevation Data written by J. Hutchings and published by . This book was released on 1985 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital grid-point elevation models are a widely distributed and applied source of digital topographic data. DEMs are commonly used to generate planimetric contour, slope, or aspect maps and are often merged with other sources of data for sophisticated modeling and systems applications. DEMs cover either large land areas at a course resolution or very limited sites at high resolution. Emerging technology in such diverse areas as robotics, computer image generation, and computer simulation will require timely, cost effective custom DEM data. This paper details a system designed to meet these impending future requirements for DEM (Digital Elevation Models). A collection system for DEMs using an adaptive spacing grid is used to optimize resources when collecting DEMs in areas that have wide variations in relief. Future enhancements are proposed to provide adjustments between data collected during separate sessions and to densify existing DEM data to a higher resolution. Keywords: CAPIR(Computer Assisted Photointerpretation Research).
Download or read book Environmental Applications of Digital Terrain Modeling written by John P. Wilson and published by John Wiley & Sons. This book was released on 2018-04-23 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: A digital elevation model (DEM) is a digital representation of ground surface topography or terrain. It is also widely known as a digital terrain model (DTM). A DEM can be represented as a raster (a grid of squares) or as a vector based triangular irregular network (TIN). DEMs are commonly built using remote sensing techniques, but they may also be built from land surveying. DEMs are used often in geographic information systems, and are the most common basis for digitally-produced relief maps. The terrain surface can be described as compromising of two different elements; random and systematic. The random (stochastic) elements are the continuous surfaces with continuously varying relief. It would take an endless number of points to describe exactly the random terrain shapes, but these can be described in practice with a network of point. It is usual to use a network that creates sloping triangles or regular quadrants. This book examines how the methods and data sources used to generate DEMs and calculate land surface parameters have changed over the past 25 years. The primary goal is to describe the state-of-the-art for a typical digital terrain modeling workflow that starts with data capture, continues with data preprocessing and DEM generation, and concludes with the calculation of one or more primary and secondary land surface parameters. Taken as a whole, this book covers the basic theory behind the methods, the instrumentation, analysis and interpretation that are embedded in the modern digital terrain modeling workflow, the strengths and weaknesses of the various methods that the terrain analyst must choose among, typical applications of the results emanating from these terrain modeling workflows, and future directions. This book is intended for researchers and practitioners who wish to use DEMs, land surface parameters, land surface objects and landforms in environmental projects. The book will also be valuable as a reference text for environmental scientists who are specialists in related fields and wish to integrate these kinds of digital terrain workflows and outputs into their own specialized work environments.
Download or read book Terrain Analysis written by John P. Wilson and published by John Wiley & Sons. This book was released on 2000-08-03 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch untersucht, welchen Einfluß Landschaftsformen, insbesondere Höhenunterschiede, auf die an der Erdoberfläche ablaufenden Prozesse haben. Wasserbewegungen, die Sonneneinstrahlung sowie die Bodenentwicklung und -erosion werden alle mehr oder minder durch die Form der Landschaftsoberfläche gesteuert. Die Anwendungsmöglichkeiten der Landschaftsanalyse sind vielfältig: Sie reichen von Studien über Wasserscheiden und Feuchtgebiete über Bodenkunde und Erosionsstudien, Landschafts- und Landnutzungsstudien bis zu geomorphologischer Forschung und regionalen und globalen Ökologiestudien. Darüber hinaus kann die Landschaftsanalyse auch zu meteorologischen Vorhersagen sowie bei Problemen mit TV- oder Radiosignalempfang eingesetzt werden. Dieses Forschungsgebiet hat in Verbindung mit den jüngsten Fortschritten auf dem Gebiet der GIS und GPS eine rasante Entwicklung durchlaufen. In diesem Band werden alle diese neuen Ansätze und Anwendungsbereiche umfassend erläutert. (y05/00)
Download or read book Global Land Ice Measurements from Space written by Jeffrey S. Kargel and published by Springer. This book was released on 2014-07-08 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international team of over 150 experts provide up-to-date satellite imaging and quantitative analysis of the state and dynamics of the glaciers around the world, and they provide an in-depth review of analysis methodologies. Includes an e-published supplement. Global Land Ice Measurements from Space - Satellite Multispectral Imaging of Glaciers (GLIMS book for short) is the leading state-of-the-art technical and interpretive presentation of satellite image data and analysis of the changing state of the world's glaciers. The book is the most definitive, comprehensive product of a global glacier remote sensing consortium, Global Land Ice Measurements from Space (GLIMS, http://www.glims.org). With 33 chapters and a companion e-supplement, the world's foremost experts in satellite image analysis of glaciers analyze the current state and recent and possible future changes of glaciers across the globe and interpret these findings for policy planners. Climate change is with us for some time to come, and its impacts are being felt by the world's population. The GLIMS Book, to be released about the same time as the IPCC's 5th Assessment report on global climate warming, buttresses and adds rich details and authority to the global change community's understanding of climate change impacts on the cryosphere. This will be a definitive and technically complete reference for experts and students examining the responses of glaciers to climate change. World experts demonstrate that glaciers are changing in response to the ongoing climatic upheaval in addition to other factors that pertain to the circumstances of individual glaciers. The global mosaic of glacier changes is documented by quantitative analyses and are placed into a perspective of causative factors. Starting with a Foreword, Preface, and Introduction, the GLIMS book gives the rationale for and history of glacier monitoring and satellite data analysis. It includes a comprehensive set of six "how-to" methodology chapters, twenty-five chapters detailing regional glacier state and dynamical changes, and an in-depth summary and interpretation chapter placing the observed glacier changes into a global context of the coupled atmosphere-land-ocean system. An accompanying e-supplement will include oversize imagery and other other highly visual renderings of scientific data.
Download or read book Land Surface Evaluation for Engineering Practice written by Dr. James S. Griffiths and published by Geological Society of London. This book was released on 2001 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers on techniques and case studies in land surface evaluation for engineering practice written by specialist practitioners in the field. The volume arose out of deliberations by the Second Working Party on Land Surface Evaluation set up by the engineering group of the Geological Society in January 1997 and chaired by Dr J.S. Griffiths. The book provides examples of cost-effective methods for collecting land surface and near surface data prior to carrying further detailed ground investigations of engineering sites.
Download or read book Scenario Studies for the Rural Environment written by Job F.Th. Schoute and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rural areas need to fulfil a large variety of functions and to accommodate many activities. The complexity of the problems, limited funds, and the almost irreversible character of some interventions result in a compelling need to evaluate ex ante the effects of alternative solutions for designation of land, for measures to develop infrastructure, and for soil and water management. Scenario studies are undertaken to help manage the complexity, to place bounds on uncertainties, and to create new visions. After an overview of the nature, variety and scope of scenario studies, the book illuminates various European examples and reviews, under the following headings: regional soil and water management; nature development and landscape quality; rural planning and the future of regions.
Download or read book GIS for Water Resource and Watershed Management written by John G. Lyon and published by CRC Press. This book was released on 2002-10-03 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of GIS, and its application for solving environmental problems is growing rapidly. This powerful set of tools can be used to great effect in hydrological modeling, environment and habitat assessments, ecosystem studies, monitoring of wetlands and forested watersheds, urban studies, agricultural impact assessment and much more. GIS for Water
Download or read book Comprehensive Seismic Zonation Schemes for Regions at Different Scales written by T. G. Sitharam and published by Springer. This book was released on 2018-06-30 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and assesses the various methodologies for site characterization and site effect estimation to carry out seismic zonation at micro and macro levels. Readers will learn about the suitability of these methodologies for each level of zoning that needs to be assessed in order to optimize the resources for carrying out seismic zonation. The Indian sub-continent is highly vulnerable to earthquake hazards, and past studies have focused primarily on the Himalayan region (inter-plate zone) and the northeast region (subduction zone). The book improves understanding of the Peninsular India that also has significantly high seismicity and is prone to earthquakes of sizeable magnitude. Particular attention is given to the various methodologies for assessing seismic hazards, the scales at which site characterizations are carried out, and optimal methods for zonation practices using site data and hazard indexes. Aimed at students, this book will be of use to post-graduates and doctoral students researching seismic zonation, hazard assessment and mitigation, and spatial data in earth sciences.
Download or read book Multi dimensional Matching Techniques for Surface Extraction written by Raad A. Karim Saleh and published by . This book was released on 2000 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GIS and Geocomputation for Water Resource Science and Engineering written by Barnali Dixon and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: GIS and Geocomputation for Water Resource Science and Engineering not only provides a comprehensive introduction to the fundamentals of geographic information systems but also demonstrates how GIS and mathematical models can be integrated to develop spatial decision support systems to support water resources planning, management and engineering. The book uses a hands-on active learning approach to introduce fundamental concepts and numerous case-studies are provided to reinforce learning and demonstrate practical aspects. The benefits and challenges of using GIS in environmental and water resources fields are clearly tackled in this book, demonstrating how these technologies can be used to harness increasingly available digital data to develop spatially-oriented sustainable solutions. In addition to providing a strong grounding on fundamentals, the book also demonstrates how GIS can be combined with traditional physics-based and statistical models as well as information-theoretic tools like neural networks and fuzzy set theory.
Download or read book Sources for Digital Spatial Data written by and published by . This book was released on 1992 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basics of Geomatics written by Mario A. Gomarasca and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomatics is a neologism, the use of which is becoming increasingly widespread, even if it is not still universally accepted. It includes several disciplines and te- niques for the study of the Earth’s surface and its environments, and computer science plays a decisive role. A more meaningful and appropriate expression is G- spatial Information or GeoInformation. Geo-spatial Information embeds topography in its more modern forms (measurements with electronic instrumentation, sophisticated techniques of data analysis and network compensation, global satellite positioning techniques, laser scanning, etc.), analytical and digital photogrammetry, satellite and airborne remote sensing, numerical cartography, geographical information systems, decision support systems, WebGIS, etc. These specialized elds are intimately interrelated in terms of both the basic science and the results pursued: rigid separation does not allow us to discover several common aspects and the fundamental importance assumed in a search for solutions in the complex survey context. The objective pursued by Mario A. Gomarasca, one that is only apparently modest, is to publish an integrated text on the surveying theme, containing simple and comprehensible concepts relevant to experts in Geo-spatial Information and/or speci cally in one of the disciplines that compose it. At the same time, the book is rigorous and synthetic, describing with precision the main instruments and methods connected to the multiple techniques available today.
Download or read book Environmental Applications of Digital Terrain Modeling written by John P. Wilson and published by John Wiley & Sons. This book was released on 2018-02-15 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: A digital elevation model (DEM) is a digital representation of ground surface topography or terrain. It is also widely known as a digital terrain model (DTM). A DEM can be represented as a raster (a grid of squares) or as a vector based triangular irregular network (TIN). DEMs are commonly built using remote sensing techniques, but they may also be built from land surveying. DEMs are used often in geographic information systems, and are the most common basis for digitally-produced relief maps. The terrain surface can be described as compromising of two different elements; random and systematic. The random (stochastic) elements are the continuous surfaces with continuously varying relief. It would take an endless number of points to describe exactly the random terrain shapes, but these can be described in practice with a network of point. It is usual to use a network that creates sloping triangles or regular quadrants. This book examines how the methods and data sources used to generate DEMs and calculate land surface parameters have changed over the past 25 years. The primary goal is to describe the state-of-the-art for a typical digital terrain modeling workflow that starts with data capture, continues with data preprocessing and DEM generation, and concludes with the calculation of one or more primary and secondary land surface parameters. Taken as a whole, this book covers the basic theory behind the methods, the instrumentation, analysis and interpretation that are embedded in the modern digital terrain modeling workflow, the strengths and weaknesses of the various methods that the terrain analyst must choose among, typical applications of the results emanating from these terrain modeling workflows, and future directions. This book is intended for researchers and practitioners who wish to use DEMs, land surface parameters, land surface objects and landforms in environmental projects. The book will also be valuable as a reference text for environmental scientists who are specialists in related fields and wish to integrate these kinds of digital terrain workflows and outputs into their own specialized work environments.
Download or read book Remote Sensing of the Cryosphere written by Marco Tedesco and published by John Wiley & Sons. This book was released on 2015-01-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cryosphere, that region of the world where water is temporarily or permanently frozen, plays a crucial role on our planet. Recent developments in remote sensing techniques, and the acquisition of new data sets, have resulted in significant advances in our understanding of all components of the cryosphere and its processes. This book, based on contributions from 40 leading experts, offers a comprehensive and authoritative overview of the methods, techniques and recent advances in applications of remote sensing of the cryosphere. Examples of the topics covered include: • snow extent, depth, grain-size and impurities • surface and subsurface melting • glaciers • accumulation over the Greenland and Antarctica ice sheets • ice thickness and velocities • gravimetric measurements from space • sea, lake and river ice • frozen ground and permafrost • fieldwork activities • recent and future cryosphere-oriented missions and experiments All figures are in color and provide an excellent visual accompaniment to the technical and scientific aspect of the book. Readership: Senior undergraduates, Masters and PhD Students, PostDocs and Researchers in cryosphere science and remote sensing. Remote Sensing of the Cryosphere is the significant first volume in the new Cryosphere Science Series. This new series comprises volumes that are at the cutting edge of new research, or provide focussed interdisciplinary reviews of key aspects of the science.
Download or read book Representations Analysis and Recognition of Shape and Motion from Imaging Data written by Liming Chen and published by Springer. This book was released on 2019-05-04 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Workshop on Representations, Analysis and Recognition of Shape and Motion from Imaging Data, RFMI 2017, held in Savoi, France, in December 2017. The 8 revised full papers and 9 revised short papers presented were carefully reviewed and selected from 23 submissions. The papers are organized in topical sections on analyzing motion data; deep learning on image and shape data; 2D and 3D pattern classification; watermarking, segmentation and deformations.
