Download or read book Granulation Technology for Bioproducts written by Kiran L. Kadam and published by CRC-Press. This book was released on 1990-11-20 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation technology is important to the manufacturing of many bioproducts, such as detergent enzymes (biologically-derived products) and pharmaceuticals (bioactive products). This book describes the granulation of bioproducts through traditional approaches, such as fluidized bed granulation, spray drying, high-shear granulation and extrusion-spheronization, in addition to the application of newer approaches such as microencapsulation and liquid phase granulation. Freeze drying is also covered, which is the preferred mode for producing granular starter cultures used in the dairy industry. In addition to discussions regarding the full spectrum of suitable granulation processes, post-granulation steps such as drying (for wet processes) and coating are explained. The slant of the book is practical, which is borne out by chapters regarding the various industrial processes used to manufacture granular detergent enzymes and immobilized glucose isomerase and the selection of proper granulation processes for specific applications. Granulation Technology for Bioproducts is an important book for all bioproduct processing engineers.
Download or read book Pharmaceutical Extrusion Technology written by Isaac Ghebre-Selassie and published by CRC Press. This book was released on 2003-05-14 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Extrusion Technology is the only resource to provide in-depth descriptions and analyses of the key parameters of extruders and extrusion processes. The book highlights the applicability of melt extrusion in pharmaceutical drug development and product manufacturing, including controlled release, dissolution rate and bioavailability enhancement, and granulation technology. It brings together the technical information necessary to develop and market pharmaceutical dosage forms that meet current quality and regulatory requirements and details extruder hardware and controls, process definition and troubleshooting of single and twin screw extrusion processes, and more.
Download or read book Handbook of Pharmaceutical Granulation Technology written by Dilip M. Parikh and published by CRC Press. This book was released on 2021-05-11 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical discussions covering granulation and engineering perspectives. Covers new advances in expert systems, process modelling and bioavailability Chapters on emerging technologies in particle engineering Updated Current research and developments in granulation technologies
Download or read book Biological Granulation Technology for Wastewater Treatment written by Sílvia López Palau and published by . This book was released on 2012 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Granulation written by Agba D. Salman and published by Elsevier. This book was released on 2006-11-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation provides a complete and comprehensive introduction on the state-of-the-art of granulation and how it can be applied both in an academic context and from an industrial perspective. Coupling science and engineering practices it covers differing length scales from the sub-granule level through behaviour through single granules, to bulk granule behaviour and equipment design. With special focus on a wide range of industrially relevant areas from fertilizer production, through to pharmaceuticals. Experimental data is complemented by mathematical modelling in this emerging field, allowing for a greater understanding of the basis of particle products and this important industry sector.Four themes run through the book: 1. The Macro Scale processing for Granulation – including up to date descriptions of the methods used for granulation and how they come about and how to monitor – on-line these changes.2. The Applications of granulation from an industrial perspective, with current descriptive roles and how they are undertaken with relevance to industry, and effective properties.3. Mechanistic descriptions of granulation and the different rate processes occurring within the granulator. This includes methods of modelling the process using Population – Balance Equations, and Multi-level Computational Fluid Dynamics Models.4. The Micro Scale: Granules and Smaller, looking at single granules and there interactions and modelling, while also considering the structure of granules and their constituent liquid bridges. * Covers a wide range of subjects and industrial applications * Provides an understanding of current issues for industrial and academic environments* Allows the reader an understanding of the science behind engineered granulation processes
Download or read book Thermal Processing of Bio Materials written by Tadeusz Kudra and published by CRC Press. This book was released on 1998-09-16 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of developments in biotechnology, bioengineering, and related sciences, processing of bio-materials and bioproducts has become an area of strategic importance. Written in a textbook style, this book attempts to bring together both the theory and practice of thermal processing of bio-materials. The authors describe the principal techniques such as freezing, chilling, membrane concentration, evaporation, drying, and sterilization and their own research experiences, including degradation of thermo and xerolabile bio- products.
Download or read book Animal Cell Technology Basic Applied Aspects written by Japanese Association for Animal Cell Technology. Meeting and published by Springer Science & Business Media. This book was released on 2002-04-30 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Thirteenth Annual Meeting of the Japanese Association for Animal Cell Technology (JAACT), Fukuoka-Karatsu, November 16-21, 2000
Download or read book Fluidization Solids Handling and Processing written by Wen-Ching Yang and published by Elsevier. This book was released on 1998-12-31 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, Fluidization, Solids Handling, and Processing, is the first of a series of volumes on "Particle Technology". Particles are important products of chemical process industries spanning the basic and specialty chemicals, agricultural products, pharmaceuticals, paints, dyestuffs and pigments, cement, ceramics, and electronic materials. Solids handling and processing technologies are thus essential to the operation and competitiveness of these industries. Fluidization technology is employed not only in chemical production, it also is applied in coal gasification and combustion for power generation, mineral processing, food processing, soil washing and other related waste treatment, environmental remediation, and resource recovery processes. The FCC (Fluid Catalytic Cracking) technology commonly employed in the modern petroleum refineries is also based on fluidization principles.
Download or read book Animal Cell Technology Basic Applied Aspects written by Sanetaka Shirahata and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Animal cell technology is a growing discipline of cell biology, which aims not only to understand structures, functions, and behaviours of differentiated animal cells but also to ascertain their ability to be used for industrial and medical purposes. The goal of animal cell technology includes accomplishments of clonal expansion of differentiated cells with useful ability, optimisation of their culture conditions, modulation of their ability for production of medically and pharmaceutically important proteins, and the application of animal cells to gene therapy, artificial organs, and functional foods. This volume gives the reader a complete review of the present state of the art in Japan and other countries where this field is well advanced. The Proceedings will be useful for cell biologists, biochemists, molecular biologists, immunologists, biochemical engineers, and other disciplines related to animal cell culture, working in either academic environments or in industries of biotechnology and pharmacy.
Download or read book Kirk Othmer Chemical Technology and the Environment 2 Volume Set written by Wiley and published by John Wiley & Sons. This book was released on 2007-05-21 with total page 2597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume reference work Chemical Technology and the Environment provides readers with knowledge on contemporary issues in environmental pollution, prevention and control, as well as regulatory, health and safety issues as related to chemical technology. It introduces and expands the knowledge on emerging "green" materials and processes and "greener" energy technology, as well as more general concepts and methodology including sustainable development and chemistry and green chemistry. Based on Wiley's renowned, Kirk-Othmer Encyclopedia of Chemical Technology, this compact reference features the same breadth and quality of coverage and clarity of presentation found in the original.
Download or read book Flat Panel Display Technologies written by Lawrence E. Tannas and published by William Andrew. This book was released on 1995-12-31 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large scale manufacturing of liquid crystal flat panel displays (LCDs) by Japan brought the world's attention to the existence of an enormous market potential exists when there are alternatives to the cathode ray tube (CRT). The Japanese have recognized that new display technologies are critical to making their products highly competitive in the world market. The CRT is losing market share to the solid-state flat panel display. Japan currently holds 90% of the market, and this book outlines opportunities in the former Soviet Union, where companies with the necessary technology are seeking partners, investment, and manufacturing opportunities. Entire cities that were once not even on the map due to their military mission, are now appearing, filled with state-of-the-art electronic technology. The book is developed from the reports issued by investigators based on their field visits to 33 sites in Japan, and 26 sites in Russia, Ukraine, and Belarus.
Download or read book Flavourings written by Herta Ziegler and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for flavourings has been constantly increasing over the last years as a result of the dramatic changes caused by a more and more industrialised life-style: The consumer is drawn to interesting, healthy, pleasurable, exciting or completely new taste experiences. This book draws on the expert knowledge of nearly 40 contributors with backgrounds in both industry and academia and provides a comprehensive insight into the production, processing and application of various food flavourings. Methods of quality control and quality management are discussed in detail. The authors also focus on conventional and innovative analytical methods employed in this field and, last but not least, on toxicological, legal, and ethical aspects. Up-to-date references to pertinent literature and an in-depth subject index complete the book.
Download or read book Handbook of Downstream Processing written by E. Goldberg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last two decades have seen a phenomenal growth of the field of genetic or biochemical engineering and have witnessed the development and ultimately marketing of a variety of products-typically through the manipulation and growth of different types of microorganisms, followed by the recovery and purification of the associated products. The engineers and biotechnologists who are involved in the full-scale process design of such facilities must be familiar with the variety of unit operations and equipment and the applicable regulatory requirements. This book describes current commercial practice and will be useful to those engineers working in this field in the design, construction and operation of pharmaceutical and biotechnology plants. It will be of help to the chemical or pharmaceutical engineer who is developing a plant design and who faces issues such as: Should the process be batch or continuous or a combination of batch and continuous? How should the optimum process design be developed? Should one employ a new revolutionary separation which could be potentially difficult to validate or use accepted technology which involves less risk? Should the process be run with ingredients formulated from water for injection, deionized water, or even filtered tap water? Should any of the separations be run in cold rooms or in glycol jacketed lines to minimize microbial growth where sterilization is not possible? Should the process equipment and lines be designed to be sterilized in-place, cleaned-in-place, or should every piece be broken down, cleaned and autoclaved after every turn?
Download or read book Spray Freeze Drying of Foods and Bioproducts written by S. Padma Ishwarya and published by CRC Press. This book was released on 2022-04-19 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray-freeze-drying (SFD) is a synergistic drying technology that imbibes in it the merits of both spray drying and freeze-drying, whilst overcoming the limitations of these predecessor technologies. SFD produces uniquely powdered food and pharmaceutical products with porous microstructure and superior quality attributes. Owing to its atomization step and ultra-low-temperature operation, SFD is a competent drying technique for the production of valuable but sensitive bioactive components. Despite the costs and complexities involved, SFD has a competitive edge over the conventional drying techniques in providing distinctive product attributes. The applications of spray-freeze-drying in the area of food and bioproducts span across the product categories of instant food powders, dry flavors, active pharmaceutical ingredients, poorly water-soluble drugs, probiotics, proteins, enzymes and vaccines. Spray-Freeze-Drying of Foods and Bioproducts: Theory, Applications and Perspectives is the first exclusive title on this interesting drying technique. It provides a comprehensive understanding of the fundamentals of SFD and its food and pharmaceutical applications. The scope of this book, comprising 12 chapters, has been organizedunder four major headings: fundamentals of process-stages, applications with case-studies, recent advancements and the processing bottlenecks and solutions. Key Features Provides examples and case studies of nuances and intricacies associated with each stage of the spray-freeze-drying process Highlights the applications of spray-freeze-drying in the production of food products including soluble coffee, dairy powders, probiotics and flavors Serves as a ready-reckoner of characterization methods for spray-freeze-dried products Contains 200+ illustrations and tabulations The contents of this book are organized to cater to the knowledge needs of students, academicians, researchers and professionals in the food and pharmaceutical industry.
Download or read book Powdered Detergents written by Michael Showell and published by Routledge. This book was released on 2017-10-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Facilitating the development of important processes that yield increased detersive performance from smaller dosages, this work examines up-to-date and emerging process and chemical technologies used in the formulation of compact powdered detergents. It provides a survey of technological developments fundamental to powder compaction, such as the replacement of traditional phosphate builders and the introduction of insoluble zeolites as particle process aids.
Download or read book Flavourings written by Erich Ziegler and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for flavourings has been constantly increasing over the last years as a result of the dramatic changes caused by a more and more industrialised life-style: The consumer is drawn to interesting, healthy, pleasurable, exciting or completely new taste experiences. This book draws on the expert knowledge of nearly 40 contributors with backgrounds in both industry and academia and provides a comprehensive insight into the production, processing and application of various food flavourings. Established flavours produced commercially are summarized on a large scale. Methods of quality control and quality management are discussed in detail. The authors also focus on conventional and innovative analytical methods employed in this field and, last but not least, on toxicological, legal, and ethical aspects. Up-to-date references to pertinent literature and an in-depth subject index complete the book.
Download or read book Bioprocessing of Renewable Resources to Commodity Bioproducts written by Virendra S. Bisaria and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the vision of a successful biorefinery—the lignocelluloic biomass needs to be efficiently converted to its constituent monomers, comprising mainly of sugars such as glucose, xylose, mannose and arabinose. Accordingly, the first part of the book deals with aspects crucial for the pretreatment and hydrolysis of biomass to give sugars in high yield, as well as the general aspects of bioprocessing technologies which will enable the development of biorefineries through inputs of metabolic engineering, fermentation, downstream processing and formulation. The second part of the book gives the current status and future directions of the biological processes for production of ethanol (a biofuel as well as an important commodity raw material), solvents (butanol, isobutanol, butanediols, propanediols), organic acids (lactic acid, 3-hydroxy propionic acid, fumaric acid, succinic acid and adipic acid), and amino acid (glutamic acid). The commercial production of some of these commodity bioproducts in the near future will have a far reaching effect in realizing our goal of sustainable conversion of these renewable resources and realizing the concept of biorefinery. Suitable for researchers, practitioners, graduate students and consultants in biochemical/ bioprocess engineering, industrial microbiology, bioprocess technology, metabolic engineering, environmental science and energy, the book offers: Exemplifies the application of metabolic engineering approaches for development of microbial cell factories Provides a unique perspective to the industry about the scientific problems and their possible solutions in making a bioprocess work for commercial production of commodity bioproducts Discusses the processing of renewable resources, such as plant biomass, for mass production of commodity chemicals and liquid fuels to meet our ever- increasing demands Encourages sustainable green technologies for the utilization of renewable resources Offers timely solutions to help address the energy problem as non-renewable fossil oil will soon be unavailable
