Download or read book Grain Boundary Migration in Metals written by Gunter Gottstein and published by CRC Press. This book was released on 1999-06-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of adjacent materials at the boundary where they meet is an essential aspect of creating new engineering materials. Grain Boundary Migration in Metals is an authoritative account of the physics of grain boundary motion, written by two highly respected researchers. They provide a comprehensive overview of current knowledge regarding the migration process and how it affects microstructure evolution, focusing their treatment exclusively on the properties and behavior of grain boundaries with well defined geometry and crystallography. With their emphasis on applications-such as the characterization of microstructure and texture, recrystallization, and grain growth-the authors effectively fill the gap between the physics of grain boundary motion and its engineering practicality. The need for better microstructural design motivates permanent thrust for research in the field, and continued rapid progress appears inevitable. Grain Boundary Migration in Metals provides a solid foundation in the phenomena and serves as a valuable reference for professionals in materials science, solid state physics, and any industry engaged in metals production and the heat treatment of metals and alloys.
Download or read book Grain Growth in Polycrystalline Materials written by G. Abbruzzese and published by . This book was released on 1992 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes present investigations on grain growth phenomena and their observation in various materials: metals and alloys, ceramics, sintered materials, thin films, etc.; normal and abnormal grain growth including twinning, texture, particle and other drag effects as well as analysis of topological aspects and grain size and grain orientation correlations; grain boundary structure, mobility and interaction with particles and impurity atoms. Experimental methods applicable to measurements of grain size, orientation of individual grains, etc.
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Grain Growth in Polycrystalline Materials II written by T. Watanabe and published by Trans Tech Publications. This book was released on 1996 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain Growth is one of the most fundamental microstructural changes, and occurs in all types of polycrystalline material. It is of major scientific interest, and of great importance in a wide range of industrial applications.
Download or read book Grain Growth in Polycrystalline Materials II written by Hideo Yoshinaga and published by . This book was released on 1996 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain Growth is one of the most fundamental microstructural changes, and occurs in all types of polycrystalline material. It is of major scientific interest, and of great importance in a wide range of industrial applications. This volume presents the most recent contributions to the research effort on the experimental study, theory and simulation of grain growth. Currently available experimental data are compared with recent theoretical results, and the most promising areas for future research are identified. Applications of the new findings to industrial experiences and problems are presented. The principal topics covered are normal and abnormal grain growth, texture, drag effects, topological aspects, grain size-effects, and boundary structure, mobility and interaction with particles and impurity atoms.
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book 2D and 3D Grain Growth Modeling and Simulation written by Luis Antonio Barrales-Mora and published by Cuvillier Verlag. This book was released on 2008 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.
Download or read book Grain Growth in Polycrystalline Materials I written by Giuseppe Abbruzzese and published by Trans Tech Publications Ltd. This book was released on 1992-01-01 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 1st International Conference on Grain Growth in Polycrystalline Materials, Rome, Italy, 1991
Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by Michael Anthony Nastasi and published by Springer Science & Business Media. This book was released on 1993 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging class of new materials characterized by ultra-fine microstrucures. The NATO ASI which produced this book was the first international scientific meeting devoted to a discussion of the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Topics covered include superplasticity, tribology, and the supermodulus effect. Review chapters cover a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties. Much of the work is concerned with the issue of how far conventional techniques and concepts can be extended toward atomic scale probing. Another key issue concerns the structure of nanocrystalline materials, in particular, what is the structure and composition of the internal boundaries. These ultra-fine microstructures have proved to challenge even the finest probes that the materials science community has today.
Download or read book Recrystallization in Materials Processing written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concise Dictionary of Materials Science written by Vladimir Novikov and published by CRC Press. This book was released on 2002-09-25 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed knowledge of the terminology and its background is necessary for a fundamental understanding of the professional literature in the field of materials science. This sharply focused, authoritative lexicon affords the reader a coherent idea of microstructure formation and evolution. All the term definitions are supplied with explanations an
Download or read book Perovskite Photovoltaics and Optoelectronics written by Tsutomu Miyasaka and published by John Wiley & Sons. This book was released on 2022-03-21 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Photovoltaics and Optoelectronics Discover a one-of-a-kind treatment of perovskite photovoltaics In less than a decade, the photovoltaics of organic-inorganic halide perovskite materials has surpassed the efficiency of semiconductor compounds like CdTe and CIGS in solar cells. In Perovskite Photovoltaics and Optoelectronics: From Fundamentals to Advanced Applications, distinguished engineer Dr. Tsutomu Miyasaka delivers a comprehensive exploration of foundational and advanced topics regarding halide perovskites. It summarizes the latest information and discussion in the field, from fundamental theory and materials to critical device applications. With contributions by top scientists working in the perovskite community, the accomplished editor has compiled a resource of central importance for researchers working on perovskite related materials and devices. This edited volume includes coverage of new materials and their commercial and market potential in areas like perovskite solar cells, perovskite light-emitting diodes (LEDs), and perovskite-based photodetectors. It also includes: A thorough introduction to halide perovskite materials, their synthesis, and dimension control Comprehensive explorations of the photovoltaics of halide perovskites and their historical background Practical discussions of solid-state photophysics and carrier transfer mechanisms in halide perovskite semiconductors In-depth examinations of multi-cation anion-based high efficiency perovskite solar cells Perfect for materials scientists, crystallization physicists, surface chemists, and solid-state physicists, Perovskite Photovoltaics and Optoelectronics: From Fundamentals to Advanced Applications is also an indispensable resource for solid state chemists and device/electronics engineers.
Download or read book Three Dimensional X Ray Diffraction Microscopy written by Henning Friis Poulsen and published by Springer Science & Business Media. This book was released on 2004-08-31 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional x-ray diffraction (3DXRD) microscopy is a novel experimental method for structural characterisation of polycrystalline materials. The position, morphology, phase, strain and crystallographic orientation of hundreds of grains or sub-grain embedded within mm-cm thick specimens can be determined simultaneously. Furthermore, the dynamics of the individual structural elements can be monitored during typical processes such as deformation or annealing. The book gives a comprehensive account of the methodology followed by a summary of selected applications. The method is presented from a mathematical/crystallographic point-of-view but with sufficient hands-on details to enable the reader to plan his or her own experiments. The scope of applications includes work in materials science and engineering, geophysics, geology, chemistry and pharmaceutical science.
Download or read book Crystallographic Texture of Materials written by Satyam Suwas and published by Springer. This book was released on 2016-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. - Demonstrates how friction stir processing can be used to make metal matrix composites - Includes a review of different approaches of making metal matrix composites by friction stir processing - Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites - Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites
