Download or read book Grain Growth and Grain Boundary Phenomena in Zone refined Lead written by Gustav Frederic Bolling and published by . This book was released on 1957 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain Boundary Migration written by and published by . This book was released on 1965 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes. The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher. The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.
Download or read book Grain Size Control written by T. Gladman and published by CRC Press. This book was released on 2020-11-25 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain Size Control provides an excellent account of the understanding of many matters concerning grains, grain structure, and grain growth in controlling the grain size of polycrystalline metals. It considers the application of the principles of grain growth.
Download or read book The Nature and Behavior of Grain Boundaries written by Anning Hu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the dramatically increased interest in the study of grain boundaries during the past few years, the Physical Metal lurgy Committee of The Institute of Metals Division of The Metal lurgical Society, AIME, sponsored a four-session symposium on the NATURE AND BEHAVIOR OF GRAIN BOUNDARIES, at the TMS-AIME Fall Meeting in Detroit, Michigan, October 18-19, 1971. The main ob jectives of this symposium were to examine the more recent develop ments, theoretical and experimental, in our understanding of grain boundaries, and to stimulate further studies in these and related areas. This volume contains most of the papers presented at the Symposium. It is regrettable that space limitations allow the inclusion of only four of the unsolicited papers, in addition to thirteen invited papers. The papers are grouped into three sections according to their major content: STRUCTURE OF GRAIN BOUNDARIES, ENERGETICS OF GRAIN BOUNDARIES, and GRAIN BOUNDARY MOTION AND RELATED PHENOMENA. Grain boundaries, or crystal interfaces, have been of both academic and practical interest for many years. An early seminar on "Metal Interfaces" was documented in 1952 by ASM. The Fourth Metallurgical Colloquium held in France, 1960, had a broad coverage on "Properties of Grain Boundaries". More recently the Australian Institute of Metals sponsored a conference on interfaces, with the proceedings being published by Butterworths in 1969.
Download or read book Effect of Solute Elements on Grain Growth in Zone Refined Lead written by O.K. Chopra and published by . This book was released on 1968 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain growth behavior and efficient large scale simulations of recrystallization with the phase field method written by Vondrous, Alexander and published by KIT Scientific Publishing. This book was released on 2014-12-15 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the found insights of grain growth behavior, of multidimensional decomposition for regular grids to efficiently parallelize computing and how to simulate recrystallization by coupling the finite element method with the phase-field method for microstructure texture analysis. The frame of the book is created by the phase-field method, which is the tool used in this work, to investigate microstructure phenomena.
Download or read book Grain Boundaries in Metals written by Donald McLean and published by . This book was released on 1957 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Some Experiments on the Relative Hardness of Grains and Grain Boundaries in the Presence of Solutes written by Mark Goldberg and published by . This book was released on 1966 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: An alloy of zone refined aluminum plus 0.0124 atomic percent copper has been used to test the possibility that the broad bands of grain boundary hardening due to solute segregation found by Westbrook and Aust (1963) in their tin-silver-, and gold doped zone-refined lead represent a general phenomenon. The results revealed no hardening effect at the boundaries of the copper-doped aluminum. In view of the fact that these results are in striking contrast to those found by Westbrook and Aust, many of the experimental techniques used and the results themselves are described in greater detail than might otherwise be warranted for negative results. (Author).
Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Elsevier. This book was released on 2004-02-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena fulfils the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new 2nd edition ensures the reader has access to the latest findings, essential to those working at the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technologically important examples. In particular, the second edition builds on the significant progress made recently in the following key areas: Deformed state, including deformation to very large strains Characterisation of microstructures by electron backscatter diffraction (EBSD) Modelling and simulation of annealing Continuous recrystallization Fully revised and up-to-date, the second edition highlights the significant progress made recently in this important area of research Detailed coverage, much more comprehensive treatment than is found in textbooks on physical metallurgy bridges the gap between theory and practice by examining the application of quantitative, physically based models to metal forming processes
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Transactions of the American Institute of Mining Metallurgical and Petroleum Engineers Incorporated written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1960 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each vol. publishes separately the transactions of the Society of Mining Engineers of AIME, the Society of Petroleum Engineers of AIME, or the Society of Metallurgical Engineers of AIME.
Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. Demonstrates how friction stir processing can be used to make metal matrix composites Includes a review of different approaches of making metal matrix composites by friction stir processing Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites
Download or read book Research in Progress written by and published by . This book was released on 1971 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Grain Boundary Engineering in Ceramics written by Taketo Sakuma and published by Wiley-American Ceramic Society. This book was released on 2000-06-28 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key technologies needed to understand and develop the mechanical and electrical properties of ceramics is the field of grain boundary engineering. This book covers new developments in this important field and addresses topics from grain boundary phenomena to grain boundary quantum structures, including the development of new techniques such as multifunctional electronmicroscopes, various kinds of spectroscopic analysis, and first principles calculations. Proceedings of the Japan Fine Ceramics Center Workshop, March 15-17, 2000, in Nagoya, Japan; Ceramic Transactions, Volume 118.
