Download or read book Gradient Microstructure in Laser Shock Peened Materials written by Liucheng Zhou and published by Springer Nature. This book was released on 2021-06-12 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamentals and principles of laser shock peening (LSP) for aeronautical materials. It focuses on the innovation in both theory and method related to LSP-induced gradient structures in titanium alloys and Ni-based alloys which have been commonly used in aircraft industries. The main contents of the book include: the characteristics of laser shock wave, the formation mechanism of gradient structures and the strengthening-toughing mechanism by gradient structures. The research has accumulated a large amount of experimental data, which has proven the significant effectiveness of LSP on the improvement of the fatigue performance of metal parts, and related findings have been successfully applied in aerospace field. This book could be used by the researchers who work in the field of LSP, mechanical strength, machine manufacturing and surface engineering, as well as who major in laser shock wave and materials science.
Download or read book Finite Element Modelling of Shot Peening and Strengthening Mechanism Analysis written by Cheng Wang and published by Scientific Research Publishing, Inc. USA. This book was released on 2023-08-25 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The service performance and life of metal parts are closely related to the surface integrity of materials. Shot peening (SP) is a well-known surface strengthening technique and is widely used for the improvement of the component surface integrity in industrial fields, such as aerospace,vehicle, construction machinery and etc. With the rapid development of science and technology, numerous new SP techniques have been developed from the conventional mechanical shot peening, such as the laser shock peening (LSP), ultrasonic shot peening (USP),surface mechanical attrition treatment (SMAT) and etc. Different from the other mechanical processing techniques, a considerable number of process parameters have an influence on the surface strengthening effects of shot-peened metal parts. Therefore, the selection of the SP process parameters with respect to the different metal parts has always been a challenge. With the rapid development of the computer technology, the numerical simulation has increasingly attracted the more and more attentions both from the academy and the industry. Compared to the experimental investigations, the numerical simulations are not only timesaving and economical, but also can provide an insight into the surface strengthening mechanisms of SP.
Download or read book Laser Metallic Additive Manufacturing Technologies by Thermal Mechanical Interaction written by Jinzhong Lu and published by Springer Nature. This book was released on with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Resistance Behaviour of Metallic Materials Subjected to Laser Shock Peening written by Kaiyu Luo and published by Springer Nature. This book was released on with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Shock Peening written by Shikun Zou and published by Springer Nature. This book was released on 2023-06-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the fundamentals and latest progresses in the research and applications of laser shock peening (LSP). As a novel technology for surface treatment, LSP greatly improves the resistance of metallic materials to fatigue and corrosion. The book presents the mechanisms, techniques, and applications of LSP in a systematic way. It discusses a series of new progresses in fatigue performance improvement of metal parts with LSP. It also introduces lasers, equipment, and techniques of newly developed industry LSP, with a detailed description of the novel LSP blisk. The book demonstrates in details numerical analysis and simulation techniques and illustrates process stability control, quality control, and analysis determination techniques. It is a valuable reference for scientists, engineers, and students in the fields of laser science, materials science, astronautics, and aeronautics who seek to understand, develop, and optimize LSP processes.
Download or read book GaN AIN InN and their Alloys Volume 831 written by Christian Wetzel and published by Cambridge University Press. This book was released on 2005-07-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses GaN and Related Alloys and reflects an emerging emphasis on the binaries of InN and AlN. The major thrust here is the topical development of thin-film growth, bulk growth techniques, methods to cover the full ternary and quaternary alloy ranges toward InN and AlN and their characterization; strategies for structural defect reduction and their characterization; ways to better control p-type doping and its characterization; device and defect physics, including polarization effects; physics of surfaces and interfaces; and device processing techniques. In addition, advances in MBE devices, high-power electronics, RF performance of electronics, UV emitters, high-efficiency light emitters, photo and chemical sensors, as well as new applications within the group-III nitrides, are also covered. The book captures the current status of this field and will be useful for researchers working with group-III nitrides, as well as for students who seek entry into this subject.
Download or read book Laser shock peening Performance and process simulation written by K. Ding and published by CRC Press. This book was released on 2006-01-24 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser shock peening (LSP) is a process for inducing compressive residual stresses using shock waves generated by laser pulses. It is a relatively new surface treatment for metallic materials that can greatly improve their resistance to crack initiation and propagation brought on by cyclic loading and fatigue. This book, the first of its kind, consolidates the scattered knowledge about LSP into one comprehensive volume. It describes the mechanisms of LSP and its substantial role in improving fatigue performance in terms of modification of microstructure, surface morphology, hardness, and strength. In particular, it describes numerical simulation techniques and procedures that can be adopted by engineers and research scientists to design, evaluate, and optimize LSP processes in practical applications.
Download or read book Advanced Approaches Applied to Materials Development and Design Predictions written by Abílio M. P. De Jesus and published by MDPI. This book was released on 2020-03-25 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thematic issue on advanced simulation tools applied to materials development and design predictions gathers selected extended papers related to power generation systems, presented at the XIX International Colloquium on Mechanical Fatigue of Metals (ICMFM XIX), organized at University of Porto, Portugal, in 2018. In this issue, the limits of the current generation of materials are explored, which are continuously being reached according to the frontier of hostile environments, whether in the aerospace, nuclear, or petrochemistry industry, or in the design of gas turbines where efficiency of energy production and transformation demands increased temperatures and pressures. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on failure mechanism modeling and simulation of materials are covered. As the Guest Editors, we would like to thank all the authors who submitted papers to this Special Issue. All the papers published were peer-reviewed by experts in the field whose comments helped to improve the quality of the edition. We also would like to thank the Editorial Board of Materials for their assistance in managing this Special Issue.
Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices
Download or read book Selective Laser Melting Materials and Applications written by Prashanth Konda Gokuldoss and published by . This book was released on 2020 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure-property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure-property correlations in the SLM processed materials and provides a value addition to the field of AM.
Download or read book Advanced Surface Enhancement written by Sho Itoh and published by Springer Nature. This book was released on 2019-08-30 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the first INCASE conference, organised by ARTC at A*STAR, Singapore. It provides a comprehensive review of recent advances in surface enhancement processes and strategies employed to assess their impact on materials properties and performance. As cyber-physical systems are becoming more and more relevant in manufacturing, it focuses on assessing the readiness of current technologies for future transformations, such as Industry 4.0, identifying the opportunities and challenges, and exploring ways to address them. Written by researchers, practising engineering and industry experts, the book bridges the gap between research and manufacturing, promoting technology adoption in industry and innovative ideas to prepare it for the future.
Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozetič and published by MDPI. This book was released on 2019-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
Download or read book Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques written by Vadim Silberschmidt and published by Elsevier. This book was released on 2020-04-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques provides a detailed overview of the latest developments in the mechanics of modern metal forming manufacturing. Focused on mechanics as opposed to process, it looks at the mechanical behavior of materials exposed to loading and environmental conditions related to modern manufacturing processes, covering deformation as well as damage and fracture processes. The book progresses from forming to machining and surface-treatment processes, and concludes with a series of chapters looking at recent and emerging technologies. Other topics covered include simulations in autofrettage processes, modeling strategies related to cutting simulations, residual stress caused by high thermomechanical gradients and pultrusion, as well as the mechanics of the curing process, forging, and cold spraying, among others. Some non-metallic materials, such as ceramics and composites, are covered as well. - Synthesizes the latest research in the mechanics of modern metal forming processes - Suggests theoretical models and numerical codes to predict mechanical responses - Covers mechanics of shot peening, pultrusion, hydroforming, magnetic pulse forming - Considers applicability of different materials and processes for optimum performance
Download or read book Tribology in Materials and Manufacturing written by Amar Patnaik and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology in Materials and Manufacturing - Wear, Friction and Lubrication brings an interdisciplinary perspective to accomplish a more detailed understanding of tribological assessments, friction, lubrication, and wear in advanced manufacturing. Chapters cover such topics as ionic liquids, non-textured and textured surfaces, green tribology, lubricants, tribolayers, and simulation of wear.
Download or read book Electron Backscatter Diffraction in Materials Science written by Adam J. Schwartz and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron backscatter diffraction is a very powerful and relatively new materials characterization technique aimed at the determination of crystallographic texture, grain boundary character distributions, lattice strain, phase identification, and much more. The purpose of this book is to provide the fundamental basis for electron backscatter diffraction in materials science, the current state of both hardware and software, and illustrative examples of the applications of electron backscatter diffraction to a wide-range of materials including undeformed and deformed metals and alloys, ceramics, and superconductors. The text has been substantially revised from the first edition, and the authors have kept the format as close as possible to the first edition text. The new developments covered in this book include a more comphrensive coverage of the fundamentals not covered in the first edition or other books in the field, the advances in hardware and software since the first edition was published, and current examples of application of electron backscatter diffraction to solve challenging problems in materials science and condensed-matter physics.
