Download or read book Mineral Commodity Summaries 2020 written by Government Publishing Office and published by . This book was released on 2020-05-30 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Commodity Summaries 2019

Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.

Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.

Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Download or read book Zirconium and Hafnium written by and published by . This book was released on 1993 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Critical Materials written by Richard S. Silberglitt and published by Rand Corporation. This book was released on 2013 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high percentage of many raw and semi-finished materials critical to U.S. manufacturing are imported. China is the controlling producer of 11 of these materials and has instituted export restrictions that have led to two-tier pricing, creating pressure to move manufacturing to China. This report suggests the need for actions to mitigate the impact of such market distortions on the global manufacturing sector.

Download or read book World Mineral Statistics written by and published by . This book was released on 1987 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mineral Commodity Summaries 2017 written by Government Publishing Office and published by U.S. Government Printing Office. This book was released on 2017-03-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illustrated report is published annually to furnish estimates covering nonfuel mineral industry data. Data sheets contain information on the domestic industry structure, Government programs, tariffs, and 5-year salient statistics for more than 90 individual minerals and materials. Each chapter includes information on events, trends, and issues for each mineral commodity, as well as discussions and tabular presentations on domestic industry structure. Maps, charts, presentations, tables, and graphs are included throughout this text. Geoscientists, petroleum engineers, global community traders, construction industry engineering executives soil scientists, miners, economists, trade brokers specializing in mineral commodities and imports/exports, mineral manufacturers, statistical professionals, and American citizens may be interested in this updated historical reference. Students pursuing coursework for a Bachelor of Science or advanced degree in environmental science, geosciences, or geology may be interested in this volume for research. It is highly recommended that academic libraries with geology and mining engineering programs, special libraries within these fields, and public libraries place an updated annual copy of this primary source work in their business/economic and reference collections. Related collections: Minerals & Metals resources collection is available here: https://bookstore.gpo.gov/catalog/minerals-metals Environmental Protection & Conservation collection can be found here: https://bookstore.gpo.gov/catalog/environmental-protection-conservation Engineering: https://bookstore.gpo.gov/catalog/engineering Economic Indicators: https://bookstore.gpo.gov/catalog/economic-indicators

Download or read book Scientific Investigations Report written by Sharon E. Kroening and published by . This book was released on 2004 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.

Download or read book The World of Mineral Deposits written by Florian Neukirchen and published by Springer Nature. This book was released on 2020-02-28 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vivid introduction to economic geology not only describes the most important deposit types, but also the processes involved in their formation. Magmatic, hydrothermal and sedimentary processes as well as weathering and alteration are explained in the framework of plate tectonics and the history of the Earth. The chapter about fossil fuels includes unconventional deposits and the much-debated fracking. Other topics covered are exploration, mining and economic aspects like commodity prices.

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Metal Recycling written by and published by UN. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal recycling is a complex business that is becoming increasingly difficult! Recycling started long ago, when people realized that it was more resource- and cost-efficient than just throwing away the resources and starting all over again. In this report, we discuss how to increase metal-recycling rates - and thus resource efficiency - from both quantity and quality viewpoints. The discussion is based on data about recycling input, and the technological infrastructure and worldwide economic realities of recycling. Decision-makers set increasingly ambitious targets for recycling, but far too much valuable metal today is lost because of the imperfect collection of end-of-life (EoL) products, improper practices, or structural deficiencies within the recycling chain, which hinder achieving our goals of high resource efficiency and resource security, and of better recycling rates.

Download or read book The Disappearing Spoon written by Sam Kean and published by Little, Brown. This book was released on 2010-07-12 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: From New York Times bestselling author Sam Kean comes incredible stories of science, history, finance, mythology, the arts, medicine, and more, as told by the Periodic Table. Why did Gandhi hate iodine (I, 53)? How did radium (Ra, 88) nearly ruin Marie Curie's reputation? And why is gallium (Ga, 31) the go-to element for laboratory pranksters? The Periodic Table is a crowning scientific achievement, but it's also a treasure trove of adventure, betrayal, and obsession. These fascinating tales follow every element on the table as they play out their parts in human history, and in the lives of the (frequently) mad scientists who discovered them. The Disappearing Spoon masterfully fuses science with the classic lore of invention, investigation, and discovery -- from the Big Bang through the end of time. Though solid at room temperature, gallium is a moldable metal that melts at 84 degrees Fahrenheit. A classic science prank is to mold gallium spoons, serve them with tea, and watch guests recoil as their utensils disappear.

Download or read book The Principal Rare Earth Elements Deposits of the United States A Summary of Domestic Deposits and a Global Perspective written by Keith R Long and published by Scholar's Choice. This book was released on 2015-02-16 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Economic Geology written by Walter L. Pohl and published by John Wiley & Sons. This book was released on 2011-03-03 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity’s ever-increasing hunger for mineral raw materials, caused by a growing global population and ever increasing standards of living, has resulted in economic geology becoming a subject of urgent importance. This book provides a broad panorama of mineral deposits, covering their origin and geological characteristics, the principles of the search for ores and minerals, and the investigation of newly found deposits. Practical and environmental issues that arise during the life cycle of a mine and after its closure are addressed, with an emphasis on sustainable and "green" mining. The central scientific theme of the book is to place the extraordinary variability of mineral deposits in the frame of fundamental geological processes. The book is written for earth science students and practicing geologists worldwide. Professionals in administration, resource development, mining, mine reclamation, metallurgy, and mineral economics will also find the text valuable. Economic Geology is a fully revised translation of the the fifth edition of the German language text Mineralische und Energie-Rohstoffe. Additional resources for this book can be found at: www.wiley.com/go/pohl/geology. The author's website can be found at: http://www.walter-pohl.com.

Download or read book Rare Metal Technology 2020 written by Gisele Azimi and published by Springer Nature. This book was released on 2020-01-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Rare metals include strategic metals that are in increasing demand and subject to supply risks. Metals represented include neodymium, dysprosium, scandium and others; platinum group metals including platinum, palladium, iridium, and others; battery related metals including lithium, cobalt, nickel, and aluminum; electronics-related materials including copper and gold; and refectory metals including titanium, niobium, zirconium, and hafnium. Other critical materials such as gallium, germanium, indium and silicon are also included. Papers cover various processing techniques, including but not limited to hydrometallurgy (solvent extraction, ion exchange, precipitation, and crystallization), electrometallurgy (electrorefining and electrowinning), pyrometallurgy, and aeriometallurgy (supercritical fluid extraction). Contributions are focused on primary production as well as secondary production through urban mining and recycling to enable a circular economy. ​A useful resource for all involved in commodity metal production, irrespective of the major metal Provides knowledge of cross-application among industries Extraction and processing of rare metals that are the main building block of many emerging critical technologies have been receiving significant attention in recent years. The technologies that rely on critical metals are prominent worldwide, and finding a way to extract and supply them effectively is highly desirable and beneficial.