Download or read book FRP Technology written by R. Weatherhead and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic resins have become increasingly important over the years, finding wide application in a variety of fields. Not least have been the tremendous strides made in the use of fibre reinforced resin systems. Although by far the bulk of all fibre reinforced products are made from unsaturated polyester r~sins reinforced with glass fibres, other resins and other fibres are playing an increasingly important role. It is with this in mind that the present book has been written. An attempt has been made to combine within one book information on the various resin systems and reinforcing fibres in use today, together with some properties and processing details. Since most of the resins available are formulated products rather than pure chemical compounds, some information has been included on commercially available materials. For convenience, where commercial data have been included, these have been located at the end of the appropriate chapter or, where only limited data are presented, at the end of the appropriate section. Such data have been included for the benefit of designers and fabricators, to indicate the wide choice of materials available and to enable them to select materials without having to approach a vast number of suppliers and then to sift through an even greater number of data sheets.
Download or read book Mechanical and Physical Testing of Biocomposites Fibre Reinforced Composites and Hybrid Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-09-14 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites covers key aspects of fracture and failure in natural/synthetic fiber reinforced polymer based composite materials, ranging from crack propagation, to crack growth, and from notch-size effect, to damage-tolerant design. Topics of interest include mechanical properties, such as tensile, flexural, compression, shear, impact, fracture toughness, low and high velocity impact, and anti-ballistic properties of natural fiber, synthetic fibers and hybrid composites materials. It also covers physical properties, such as density, water absorption, thickness swelling, and void content of composite materials fabricated from natural or synthetic materials. Written by leading experts in the field, and covering composite materials developed from different natural fibers and their hybridization with synthetic fibers, the book's chapters provide cutting-edge, up-to-date research on the characterization, analysis and modelling of composite materials. - Contains contributions from leading experts in the field - Discusses recent progress on failure analysis, SHM, durability, life prediction and the modelling of damage in natural fiber-based composite materials - Covers experimental, analytical and numerical analysis - Provides detailed and comprehensive information on mechanical properties, testing methods and modelling techniques
Download or read book Unsaturated Polyester Resins written by Sabu Thomas and published by Elsevier. This book was released on 2019-07-11 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication, and Applications explains the preparation, techniques and applications relating to the use of unsaturated polyester resin systems for blends, interpenetrating polymer networks (IPNs), gels, composites and nanocomposites, enabling readers to understand and utilize the improved material properties that UPRs facilitate. Chapters cover unsaturated polyester resins and their interaction at the macro, micro and nano levels, in-depth studies on the properties and analysis of UPR based materials, and the applications of UPR based composites, blends, IPNs and gels across a range of advanced commercial and industrial fields. This is a highly detailed source of information on unsaturated polyester resins, supporting academics, researchers and postgraduate students working with UPRs, polyesters, polymeric or composite materials, polymer chemistry, polymer physics, and materials science, as well as scientists, R&D professionals and engineers in industry. - Covers the use of unsaturated polyester resin systems for blends, IPNs, gels, composites and nanocomposites - Presents cutting-edge techniques for the analysis and improvement of properties of advanced UPR-based materials - Unlocks the potential of unsaturated polyester resins in high-performance materials for a range of advanced applications
Download or read book Composites for Construction written by Lawrence C. Bank and published by John Wiley & Sons. This book was released on 2006-07-21 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on the design of FRP for structural engineering applications Composites for Construction is a one-of-a-kind guide to understanding fiber-reinforced polymers (FRP) and designing and retrofitting structures with FRP. Written and organized like traditional textbooks on steel, concrete, and wood design, it demystifies FRP composites and demonstrates how both new and retrofit construction projects can especially benefit from these materials, such as offshore and waterfront structures, bridges, parking garages, cooling towers, and industrial buildings. The code-based design guidelines featured in this book allow for demonstrated applications to immediately be implemented in the real world. Covered codes and design guidelines include ACI 440, ASCE Structural Plastics Design Manual, EUROCOMP Design Code, AASHTO Specifications, and manufacturer-published design guides. Procedures are provided to the structural designer on how to use this combination of code-like documents to design with FRP profiles. In four convenient sections, Composites for Construction covers: * An introduction to FRP applications, products and properties, and to the methods of obtaining the characteristic properties of FRP materials for use in structural design * The design of concrete structural members reinforced with FRP reinforcing bars * Design of FRP strengthening systems such as strips, sheets, and fabrics for upgrading the strength and ductility of reinforced concrete structural members * The design of trusses and frames made entirely of FRP structural profiles produced by the pultrusion process
Download or read book Kanerva s Occupational Dermatology written by Thomas Rustemeyer and published by Springer. This book was released on 2012-07-13 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational skin diseases are a field of increasing interest in today’s dermatology. Due to rapid developments in several areas of modern industry, new dermatological problems constantly occur amongst workers. The 1st edition of this Handbook of Occupational Dermatology was published in 2000 and has served as the main reference book of occupational skin diseases for general and occupational dermatologists and occupational physicians. The new edition is completely revised, updated and extended with respect to new developments. The layout allows for both quick access to practical information and in-depth reading. Included are concise tables, algorithms and figures on how to optimize the diagnostic procedure for daily patient management and expert opinion. The new edition will continue the success as major source of reference for clinical and experimental work in the field of occupational skin diseases, both for students and experts.
Download or read book Composites A Profile of the World wide Reinforced Plastics Industry Markets and Suppliers to 2005 written by T. Starr and published by Elsevier. This book was released on 1999-11-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the success of the second (1995) edition, this report takes a fresh perspective on the industry, reviewing changes and developments in industry structure, corporate strategies, market condition, technology and application trends. This profile is fully revised with market data with new forecasts to the year 2005. New and emerging technologies and applications are examined. For a PDF version of the report please call Tina Enright on +44 (0) 1865 843008 for price details.
Download or read book Advanced Fibre Reinforced Polymer FRP Composites for Structural Applications written by Jiping Bai and published by Woodhead Publishing. This book was released on 2022-12-05 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fibre-reinforced Polymer (FRP) Composites for Structural Applications, Second Edition provides updates on new research that has been carried out on the use of FRP composites for structural applications. These include the further development of advanced FRP composites materials that achieve lighter and stronger FRP composites, how to enhance FRP integrated behavior through matrix modification, along with information on pretension treatments and intelligence technology. The development of new technology such as automated manufacturing and processing of fiber-reinforced polymer (FRP) composites have played a significant role in optimizing fabrication processing and matrix formation. In this new edition, all chapters have been brought fully up-to-date to take on the key aspects mentioned above. The book's chapters cover all areas relevant to advanced FRP composites, from the material itself, its manufacturing, properties, testing and applications in structural and civil engineering. Applications span from civil engineering, to buildings and the energy industry. - Covers all areas relevant to advanced FRP composites, from the material itself, its manufacturing, properties, testing and applications in structural engineering - Features new manufacturing techniques, such as automated fiber placement and 3D printing of composites - Includes various applications, such as prestressed-FRP, FRP made of short fibers, continuous structural health monitoring using advanced optical fiber Bragg grating (FBG), durability of FRP-strengthened structures, and the application of carbon nano-tubes or platelets for enhancing durability of FRP-bonded structures
Download or read book Composites written by N. G. Brain and published by iSmithers Rapra Publishing. This book was released on 1991-12 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book COMPOSITE MATERIALS Testing and design written by and published by ASTM International. This book was released on 1972 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber reinforced plastic FRP Reinforcement for Concrete Structures written by Antonio Nanni and published by Elsevier Publishing Company. This book was released on 1993 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber reinforced plastic (FRP) composites for prestressed and non-prestressed concrete reinforcement has developed into a technology with serious and substantial claims for the advancement of construction materials and methods. Research and development is now occurring worldwide. The 20 papers in this volume make a further contribution in advancing knowledge and acceptance of FRP composites for concrete reinforcement. The articles are divided into three parts. Part I introduces FRP reinforcement for concrete structures and describes general material properties and manufacturing meth.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Polymer Systems Sixth Edition written by Ferdinand Rodriguez and published by CRC Press. This book was released on 2014-12-09 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining a balance between depth and breadth, the Sixth Edition of Principles of Polymer Systems continues to present an integrated approach to polymer science and engineering. A classic text in the field, the new edition offers a comprehensive exploration of polymers at a level geared toward upper-level undergraduates and beginning graduate students. Revisions to the sixth edition include: A more detailed discussion of crystallization kinetics, strain-induced crystallization, block copolymers, liquid crystal polymers, and gels New, powerful radical polymerization methods Additional polymerization process flow sheets and discussion of the polymerization of polystyrene and poly(vinyl chloride) New discussions on the elongational viscosity of polymers and coarse-grained bead-spring molecular and tube models Updated information on models and experimental results of rubber elasticity Expanded sections on fracture of glassy and semicrystalline polymers New sections on fracture of elastomers, diffusion in polymers, and membrane formation New coverage of polymers from renewable resources New section on X-ray methods and dielectric relaxation All chapters have been updated and out-of-date material removed. The text contains more theoretical background for some of the fundamental concepts pertaining to polymer structure and behavior, while also providing an up-to-date discussion of the latest developments in polymerization systems. Example problems in the text help students through step-by-step solutions and nearly 300 end-of-chapter problems, many new to this edition, reinforce the concepts presented.
Download or read book Decision Support System for Distribution System Piping Renewal written by Arun K. Deb and published by American Water Works Association. This book was released on 2002 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
