Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2007 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork -- Blocks and blockwork -- Lime, cement and concrete -- Timber and timber products -- Ferrous and non-ferrous metals -- Bitumen and flat roofing materials -- Glass -- Ceramic materials -- Stone and cast stone -- Plastics -- Glass-fibre reinforced plastics, cement and gypsum -- Plaster and board materials -- Insulating materials -- Energy-saving materials and components -- Recycled and ecological materials -- Sealants, gaskets and adhesives -- Paints, wood stains, varnishes and colour.
Download or read book Challenging Glass 3 written by Freek Bos and published by IOS Press. This book was released on 2012 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two things everybody knows about glass: it is transparent, and it breaks! These are also the properties that constitute the challenge of glass as an architectural and structural material. This book presents papers from the third Challenging Glass Conference (CGC3), held at the Technical University (TU) Delft, the Netherlands, in June 2012. The conference brings together glass engineering, research and design specialists. Papers are grouped under seven topic headings: project and case studies; joints, fixings and adhesives; strength, stability and safety (a category which includes a quarter of all the papers presented at the conference); laminates and composite design; curved and bended glass; architectural design and lighting and finally, glass in facades. Glass remains one of the most exciting materials available to designers and architects today. This book will be of interest to all those involved in working with glass in an architectural and structural context.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book GB 15763 4 2009 Translated English of Chinese Standard GB15763 4 2009 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-08-22 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part specifies the terms and definitions, general provisions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of heat soaked thermally tempered glass for building. This Part of GB15763 applies to heat soaked thermally tempered glass in building. For those heat soaked thermally tempered glass not-used in building (e.g. industrial equipment, furniture, etc.), this standard may be served as reference if there is no corresponding product standard.
Download or read book Springer Handbook of Glass written by J. David Musgraves and published by Springer Nature. This book was released on 2019-11-08 with total page 1851 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides comprehensive treatment of the current state of glass science from the leading experts in the field. Opening with an enlightening contribution on the history of glass, the volume is then divided into eight parts. The first part covers fundamental properties, from the current understanding of the thermodynamics of the amorphous state, kinetics, and linear and nonlinear optical properties through colors, photosensitivity, and chemical durability. The second part provides dedicated chapters on each individual glass type, covering traditional systems like silicates and other oxide systems, as well as novel hybrid amorphous materials and spin glasses. The third part features detailed descriptions of modern characterization techniques for understanding this complex state of matter. The fourth part covers modeling, from first-principles calculations through molecular dynamics simulations, and statistical modeling. The fifth part presents a range of laboratory and industrial glass processing methods. The remaining parts cover a wide and representative range of applications areas from optics and photonics through environment, energy, architecture, and sensing. Written by the leading international experts in the field, the Springer Handbook of Glass represents an invaluable resource for graduate students through academic and industry researchers working in photonics, optoelectronics, materials science, energy, architecture, and more.
Download or read book COST Action TU0905 Mid term Conference on Structural Glass written by Jan Belis and published by CRC Press. This book was released on 2013-04-05 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of glass as a structural material may seem surprising initially, yet pioneering glass structures were first built two decades ago already. Ever since, Structural Glass has been developing at a very high pace thanks to very intensive scientific and industrial research and new technological developments.Right at the heart of these rap
Download or read book Loft Conversion Handbook written by Construction Products Association and published by Routledge. This book was released on 2019-08-08 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an easy-to-use handbook, providing architects and builders with up-to-date guidance on managing loft conversions and ensuring they achieve compliance with the Building Regulations. It brings together solutions offered in the Approved Documents and third tier guidance, such as industry literature, in one concise and fully illustrated guide. Starting with chapters on the existing structure, the guide is then divided into chapters on the main considerations for a loft conversion, covering topics such as fire safety, windows and doors, and insulation. This is an essential read for anyone looking for a guide which simplifies the building regulations process and offers solutions, where applicable, to achieve minimum, good practice and advanced construction standards.
Download or read book Sustainable Civil Engineering at the Beginning of Third Millennium written by Umut Türker and published by Springer Nature. This book was released on with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Structural Engineer written by and published by . This book was released on 2006 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Glass in Building written by Bernhard Weller and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Glass in Building" opens up a whole range of fascinating design possibilities for the planning architect. Glass has long served as a translucent room closing element, but its range of possible uses is actually much wider. It not only offers protection against the external world, for example, noise or fire; despite its apparent fragility, it can even take on load-bearing functions in supporting structures. In combination with various different finishing methods, materials, and coatings, it also satisfies exacting structural-physical standards. "Glass in Building" offers a clear, compact, and illustrated overview of the material-appropriate use of this varied and versatile material in building construction and provides information that goes far beyond the basics on designing with glass and producing and using specialized glass products, as well as on the building and planning regulations that must be taken into account when constructing with glass. A selection of exemplary realized projects rounds out the theoretical section. Das Bauen mit Glas eröffnet dem planenden Architekten faszinierende gestalterische Möglichkeiten. Schon lange dient es als lichtdurchlässiger Raumabschluss, ist aber weitaus vielfältiger einsetzbar: Glas bietet nicht nur Schutz vor der Aussenwelt, etwa gegen Lärm oder Feuer, sondern kann trotz seiner vermeintlichen Zerbrechlichkeit sogar lastabtragende Funktionen innerhalb eines Tragwerks übernehmen. In Kombination mit verschiedenen Veredelungsmethoden, Materialien und Beschichtungen erfüllt es auch hohe bauphysikalische Anforderungen. „Detail Practice: Konstruktiver Glasbau" liefert einen kompakten, anschaulichen Überblick über den materialgerechten Einsatz dieses facettenreichen Baustoffs in der Baukonstruktion und vermittelt weit über die Grundlagen hinausreichende Informationen zum Entwerfen mit Glas, zur Herstellung und Anwendung spezieller Glasprodukte sowie zu den baurechtlichen Regelungen, die im Glasbau zu berücksichtigen sind. Eine Auswahl beispielhafter realisierter Projekte rundet den theoretischen Teil ab.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Glass Construction Manual written by Christian Schittich and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass offers a wide variety of possible applications for the realization of even the most ambitious designs in architecture, and in the past two decades it has experienced an unparalleled burst of innovation. For planners, this means working constantly with this high-performance material. In compact and appealing form, the completely revised Glass Construction Manual presents the current state of the art on planning and building with glass, from the history through the technical foundations all the way to the most innovative applications. Astonishing perspectives on thermal insulation and solar protection and the addition of thoughtfully selected new practical examples round off this comprehensive reference work.
Download or read book Building Openings Construction Manual written by Thomas Stark and published by Detail. This book was released on 2016-05-30 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building openings provide light, ventilation and climate control for rooms. At the same time, they are essential functional and design elements of facades. This manual offers solid facts on standards and safety features. It covers materials, construction types and specifics of structural connections, incl. solutions on how to deal with existing older windows and issues of ventilation, the use of solar energy and ecological sustainability.
Download or read book Glass Structures written by Jan Wurm and published by Springer Science & Business Media. This book was released on 2007 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat glass opens up more possibilities for the planner than virtually any other material. Because of the technological complexity of using it, however, no specific structural forms have been developed for glass supporting frameworks as they have been for wood, concrete, and steel. This book is thus the first to present a coherent guide to the planning and design of glass supporting frameworks. The focus is on the pressure-resistant, flat supporting element as a basic building block for broad supporting structures. The spatial and constructive forms of multifunctional, self-supporting glass envelopes are vividly illustrated and systematically explained. The constructions presented exhibit new aesthetic qualities, based not on the dictum of "dematerialization" but on the poetry of gleaming and transparent planes. They ring in a new chapter in the history of glass architecture.
Download or read book Fractography of Glass written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the first major reference on glass fractography, contributors to this volume offer a comprehensive account of the fracture of glass as well as various fracture surface topography. Contributors discuss optical fibers, glass containers, and flatglass fractography. In addition, papers explore fracture origins; the growth of the original flaws of defects; and macroscopic fracture patterns from which fracture patterns evolve. This volume is complete with photographs and schematics.
Download or read book The Whole Building Handbook written by Maria Block and published by Routledge. This book was released on 2010-02-09 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Whole Building Handbook is a compendium of all the issues and strategies that architects need to understand to design and construct sustainable buildings for a sustainable society. The authors move beyond the current definition of sustainability in architecture, which tends to focus on energy-efficiency, to include guidance for architecture that promotes social cohesion, personal health, renewable energy sources, water and waste recycling systems, permaculture, energy conservation - and crucially, buildings in relation to their place. The authors offer a holistic approach to sustainable architecture and authoritative technical advice, on: * How to design and construct healthy buildings, through choosing suitable materials, healthy service systems, and designing a healthy and comfortable indoor climate, including solutions for avoiding problems with moisture, radon and noise as well as how to facilitate cleaning and maintenance. * How to design and construct buildings that use resources efficiently, where heating and cooling needs and electricity use is minimized and water-saving technologies and garbage recycling technologies are used. * How to 'close' organic waste, sewage, heat and energy cycles. For example, how to design a sewage system that recycles nutrients. * Includes a section on adaptation of buildings to local conditions, looking at how a site must be studied with respect to nature, climate and community structure as well as human activities. The result is a comprehensive, thoroughly illustrated and carefully structured textbook and reference.
Download or read book Glass Interactive Building Envelopes written by Michel Crisinel and published by IOS Press. This book was released on 2007 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of tomorrow's towns and cities will be based on new social, economic and technological ideals focused on improving the quality of life. To attain this objective, architects and engineers of today must improve the quality of buildings and establish new principles of building conception. The quality of interior space and the impact of a building on its surroundings depends strongly on the physical interface that separates the outer environment from the inner building space. The conception and realisation of this interface (the envelope) are, therefore, of prime importance.
