Download or read book Geotechnical Engineering Applied Soil Mechanics and Foundation Engineering Volume 6 written by Cyrus Aryani and published by . This book was released on 2021-01-21 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils are the most common and complex type of construction material. Virtually all structures are either built with soil (e.g., earth dams and embankments), in soil (e.g., tunnels and underground storage facilities), or on soil (e.g., building foundations and roads). Soil conditions and load combinations are unique to each site. To be able to predict soil behavior under the anticipated loading conditions, the mechanics of soils should be well understood, and their specific properties evaluated. The project design should also take into consideration the environmental, social, and economic factors.This book is Volume 6 out of a six volume comprehensive coverage of topics in geotechnical engineering. This volume provides the user with the solutions to the practice problems in Volume 1 (chapters: Soil Composition and properties, Soil Improvement, Soil Water, Soil Stresses, Soil Compressibility and Settlement, Shear Strength of Soil), Volume 2 (Chapters: Lateral Earth Pressures and Retaining Structures, Stability of Slopes, Shallow Foundations, Deep Foundations), Volume 3 (chapter: Mechanically Stabilized Earth Walls), Volume 4 (chapter: Prefabricated Vertical Drains), and Volume 5 (chapters: Overview of Geosynthetics, Geotextiles, Geogrids, Geonets, Geomembranes, Geosynthetic Clay Liners, Geofoam, Geocomposites). The comprehensive solutions are presented in a clear, methodical, and easy to follow manner along with numerous guiding illustrations drawn to scale. The topics covered in all six volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE).
Download or read book Geotechnical Engineering Applied Soil Mechanics and Foundation Engineering Volume 1 written by Cyrus Aryani and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils are the most common and complex type of construction material. Virtually all structures are either built with soil (e.g., earth dams and embankments), in soil (e.g., tunnels and underground storage facilities), or on soil (e.g., building foundations and roads). Soil conditions and load combinations are unique to each site. To be able to predict soil behavior under the anticipated loading conditions, the mechanics of soils should be well understood, and their specific properties evaluated. The project design should also take into consideration the environmental, social, and economic factors. The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 1 contains chapters 1 through 7, which provides the user with a practical guide on the fundamentals of soil mechanics, including: Natural Soil Deposits, Soil Composition and Properties, Soil Improvement, Soil Water, Soil Stresses, Soil Compressibility and Settlement, and Shear Strength of Soil. Example problems follow the topic they cover. Several practice problems are included at the end of each chapter with the answers provided. It also contains the necessary forms, tables, and graphing papers for the state-of-the-practice laboratory experiments in soil mechanics.
Download or read book Geotechnical Engineering Applied Soil Mechanics and Foundation Engineering Volume 3 written by Cyrus Aryani and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 3 contains chapters 12 through 17 on analysis and design of unconventional retaining structures. Each chapter is a stand-alone design module covering a major type of retaining structure, including: Anchored Bulkheads (free and modified free earth support methods, fixed and simplified fixed earth support methods, design of anchorage system, ...), Cellular Cofferdams (cell configurations, design methods for rock, granular, and cohesive sites, ...), Soil Nail Walls (construction methods, nail load support, design approach, corrosion protection, drilling and grouting, wall drainage and facing, nail testing, wall monitoring, ...), Tieback Walls (construction methods, anchor capacity, design approach, corrosion protection, wall drainage, anchor testing, wall monitoring, ...), Mechanically Stabilized Earth (MSE) Walls (design approach for external and internal stability, select backfill, drainage requirements, ...), and Geosynthetic Reinforced Segmental Retaining Walls (design approach for external and internal stability, soil-reinforcement interaction, design details, a comprehensive wall design, ...). Each chapter is prepared to provide the reader with fundamental aspects of design methodology in a concise and practical way. Numerous illustrations are provided for better visualization and grasp of the design concepts.
Download or read book Geotechnical Engineering Applied Soil Mechanics and Foundation Engineering Volume 2 written by Cyrus Aryani and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 2 contains chapters 8 through 11, which provides the user with a practical guide on the fundamentals of soil mechanics and foundation engineering, including: Lateral Earth Pressures (at-rest case, active case, passive case, Rankine's and Coulomb's methods, Culmann's graphical method, different site and surface loading conditions, ...) and Retaining Structures (different types of retaining walls and braced cuts, stability analysis, backfill and subdrain systems, ...), Stability of Slopes (natural and man-made slopes, modes of failure, methods of analysis, landslide stabilization methods, hillside grading and land development, erosion control, ...), Shallow Foundations (types of shallow foundations, methods of bearing capacity evaluation for a variety of site, groundwater, and loading conditions, settlement analysis, ...), and Deep Foundations (installation of piles, construction of drilled shafts, load capacity of piles and drilled shafts, static and dynamic testing, integrity testing of piles, cross-hole sonic logging and thermal integrity profiling for drilled shafts, ...). Example problems follow the topic they cover. Several practice problems are included at the end of each chapter with the answers provided.
Download or read book Soil Mechanics and Foundation Engineering Fundamentals and Applications written by Nagaratnam Sivakugan and published by McGraw Hill Professional. This book was released on 2021-07-16 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the basics of soil mechanics and foundation engineering This hands-on guide shows, step by step, how soil mechanics principles can be applied to solve geotechnical and foundation engineering problems. Presented in a straightforward, engaging style by an experienced PE, Soil Mechanics and Foundation Engineering: Fundamentals and Applications starts with the basics, assuming no prior knowledge, and gradually proceeds to more advanced topics. You will get rich illustrations, worked-out examples, and real-world case studies that help you absorb the critical points in a short time. Coverage includes: Phase relations Soil classification Compaction Effective stresses Permeability and seepage Vertical stresses under loaded areas Consolidation Shear strength Lateral earth pressures Site investigation Shallow and deep foundations Earth retaining structures Slope stability Reliability-based design
Download or read book Geotechnical Engineering Applied Soil Mechanics and Foundation Engineering Volume 4 written by Cyrus Aryani and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 4 contains chapters 18 through 28 with ground modification focus. The most common methods of soil improvement are presented in a practical way covering applications, construction methods, design considerations, advantages/disadvantages of each technique, and specification guidelines. Included are: Dynamic Deep Compaction, Deep Vibro Techniques, Aggregate Piers, Grouting (slurry, chemical, compaction, jet, and soil fracture), Deep Soil Mixing, Prefabricated Vertical Drains, and Slurry Walls. Also, brief descriptions of dynamic replacement, rapid impact compaction, vibratory probes, blast densification, vibro concrete columns, controlled modulus columns, micropiles, mass mixing, ground freezing, heat treatment, vacuum consolidation, electro-treatment, and bio-treatment are provided. In addition, chapter 27 covers In-situ Soil Testing methods, including: Standard Penetration Test (SPT), Cone Penetration Test (CPT), Vane Shear Test (VST), and Dilatometer Test (DMT). Chapter 28 presents practical methods for Soil Liquefaction analysis.
Download or read book Geotechnical Engineering written by Sayed Hemeda and published by BoD – Books on Demand. This book was released on 2020-07-15 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses contemporary issues related to soil mechanics and foundation engineering in earthworks, which are critical components in construction projects and often require detailed management techniques and unique solutions to address failures and implement remedial measures. The geotechnical engineering community continues to improve the classical testing techniques for measuring critical properties of soils and rocks, including stress wave-based non-destructive testing methods as well as methods used to improve shallow and deep foundation design. To minimize failure during construction, contemporary issues and related data may reveal useful lessons to improve project management and minimize economic losses. This book focuses on these aspects using appropriate methods in a rather simple manner. It also touches upon many interesting topics in soil mechanics and modern geotechnical engineering practice such as geotechnical earthquake engineering, principals in foundation design, slope stability analysis, modeling in geomechanics, offshore geotechnics, and geotechnical engineering perspective in the preservation of historical buildings and archeological sites. A total of seven chapters are included in the book.
Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth reta
Download or read book Soil Mechanics and Geotechnical Engineering written by D.L. Shah and published by CRC Press. This book was released on 2003-01-01 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with the fundamentals and general principles of soil mechanics and geotechnical engineering, this text also examines the design methodology of shallow / deep foundations, including machine foundations. In addition to this, the volume explores earthen embankments and retaining structures, including an investigation into ground improvement techniques, such as geotextiles, reinforced earth, and more
Download or read book Soil Mechanics and Foundation Engineering 2e written by P. Purushothama Raj and published by Pearson Education India. This book was released on 2013 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil Mechanics and Foundation Engineering, 2e Presents the principles of soil mechanics and foundation engineering in a simplified yet logical manner that assumes no prior knowledge of the subject. It includes all the relevant content required for a sound background in the subject, reinforcing theoretical aspects with comprehensive practical applications.
Download or read book Advanced Geotechnical Analyses written by P.K. Banerjee and published by CRC Press. This book was released on 1991-12-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters in this book show that a careful blend of engineering judgement and advanced principles of engineering mechanics may be used to resolve many complex geotechnical engineering problems. It is hoped that these may inspire the geotechnical engineering practice to make more extensive use of them in future.
Download or read book Soil Mechanics and Foundation Engineering written by Utsav Chandra Kalita and published by PHI Learning Pvt. Ltd.. This book was released on 2010-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for the undergraduate students of civil engineering, this textbook covers the theoretical aspects of soil mechanics and foundation engineering in a single volume. The text is organized in two parts--Part I (Soil mechanics) and Part II (Foundation engineering): Part I includes the basic properties and strength of soil, vertical and lateral pressures, discussion on earthen dam, sheet piles, and stability analysis for hill slope in connection with hill road construction. Part II discusses shallow and deep foundations, approaches of analysis of machine foundation, and various methods of determining the bearing capacity of soil. A separate chapter is devoted to on-site investigation. Besides the undergraduate students, this compendium will also be useful for students appearing for various competitive examinations such as GATE, IES and IAS. Consulting engineers in geotechnical engineering may also use this book as a reference. KEY FEATURES: Includes numerical problems (with solutions) in connection with construction of dams and highways in hilly region Figures and explanations to facilitate professionals and designers of machine foundation to solve the complex problem of stability analysis Objective-type questions to aid in UPSC examinations
Download or read book Geotechnical Engineering written by C. Venkatramaiah and published by New Age International. This book was released on 2006 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of the authors long teaching experience and has been designed to meet the needs of Civil Engineering curricula for the courses in Soil Mechanics and Foundation Engineering of Indian Universities. The book has been written mainly in the S.I. Units, although some problems and examples in the M.K.S. system have been included for convenience during the period of transition. The concepts have been developed systematically in lucid language, sufficient number of well-graded Numerical examples and problems for solution have been included, and the answers for the latter have been given at the end of the book. Summary of main points and chapter-wise references have been given at the end of each chapter. References are made to the relevant Indian standard at appropriate places.
Download or read book Geotechnical Engineering Handbook written by Braja M. Das and published by J. Ross Publishing. This book was released on 2011 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geotechnical Engineering Handbook brings together essential information related to the evaluation of engineering properties of soils, design of foundations such as spread footings, mat foundations, piles, and drilled shafts, and fundamental principles of analyzing the stability of slopes and embankments, retaining walls, and other earth-retaining structures. The Handbook also covers soil dynamics and foundation vibration to analyze the behavior of foundations subjected to cyclic vertical, sliding and rocking excitations and topics addressed in some detail include: environmental geotechnology and foundations for railroad beds.
Download or read book The Mechanics of Soils and Foundations written by John Atkinson and published by CRC Press. This book was released on 2017-12-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for undergraduates of geotechnical engineering for civil engineers, this established textbook sets out the basic theories of soil mechanics in a clear and straightforward way; combining both classical and critical state theories and giving students a good grounding in the subject which will last right through into a career as a geotechnical engineer. The subject is broken down into discrete topics which are presented in a series of short, focused chapters with clear and accessible text that develops from the purely theoretical to discussing practical applications. Soil behaviour is described by relatively simple equations with clear parameters while a number of worked examples and simple experimental demonstrations are included to illustrate the principles involved and aid reader understanding.
Download or read book Soil Mechanics and Foundations written by Muniram Budhu and published by John Wiley and Sons. This book was released on 2010-12-21 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the principles that support the practice! With its simplicity in presentation, this text makes the difficult concepts of soil mechanics and foundations much easier to understand. The author explains basic concepts and fundamental principles in the context of basic mechanics, physics, and mathematics. From Practical Situations and Essential Points to Practical Examples, this text is packed with helpful hints and examples that make the material crystal clear.
Download or read book A Text Book of Soil Mechanics Foundation Engineering written by V. N. S. Murthy and published by . This book was released on 1992 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
