Download or read book Geotechnical Engineering of Dams written by Robin Fell and published by CRC Press. This book was released on 2014-11-21 with total page 1374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.

Download or read book Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on 2019-11-28 with total page 1417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).

Download or read book Planning Design and Analysis of Tailings Dams written by Steven G. Vick and published by . This book was released on 1990-01-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tailings Dam Management for the Twenty First Century written by Franco Oboni and published by Springer. This book was released on 2019-07-13 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive approach to address the need to improve the design of tailings dams, their management and the regulation of tailings management facilities to reduce, and eventually eliminate, the risk of such facilities failing. The scope of the challenge is well documented in the report by the United Nations Environment Program (UNEP) and GRID Arendal entitled “Mine Tailings Storage: Safety Is No Accident,” which was released in October 2017. The report recommends that “Regulators, industry and communities should adopt a shared, zero-failure objective to tailings storage facilities...” and identifies several areas where further improvements are required. In this context, the application of cutting-edge risk-assessment methodologies and risk-management practices can contribute to a significant reduction and eventual elimination of dam failures through Risk Informed Decision Making. As such, the book focuses on identifying and describing the risk-assessment approaches and risk-management practices that need to be implemented in order to develop a way forward to achieve socially acceptable levels of tailings dam risk.

Download or read book Geotechnical Engineering for Mine Waste Storage Facilities written by Geoffrey E. Blight and published by CRC Press. This book was released on 2009-11-16 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a comprehensive treatment of the application of geotechnical engineering to site selection, site exploration, design, operation and closure of mine waste storage facilities.The level and content are suitable as a technical source and reference for practising engineers engaged both in the design and operational management of mine waste s

Download or read book TAILINGS DAM DESIGN written by Cigb Icold and published by . This book was released on 2023-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A framework for classifying different types of tailings, ranging from ultra-fine to coarse, based on their geotechnical properties and provides typical geotechnical parameters for the different tailings types. Technologies for dewatering tailings to reduce the risk of storage continue to be developed and the different technologies.

Download or read book Tailings Dam Design Conception des Barrages de St riles Miniers written by Cigb Icold and published by CRC Press. This book was released on 2023-04-03 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tailings are produced from the processing of mineral ores and are commonly stored within embankment dams. The design of the dams requires application of sound engineering principles and an understanding of the properties of the tailings. This Bulletin provides a framework for classifying different types of tailings, ranging from ultra-fine to coarse, based on their geotechnical properties and provides typical geotechnical parameters for the different tailings types. Technologies for dewatering tailings to reduce the risk of storage continue to be developed and the different technologies, from thickening to filtration, and re-application of old technologies are presented to illustrate the options available and, where appropriate, typical in situ properties. This bulletin is directed towards a wide audience of stakeholders: designers, owners, regulators, communities and various organizations and provides a reference for communicating tailings properties and the benefits and limitations of technologies. All mining operations, and thereby tailings operations, are unique. There is no one-solution-fits-all. Tailings dam designs need to account for site-specific conditions, such as climate, physiography, geochemistry, geomorphology, seismology, mining processes, environment, and community setting, with the application of technologies playing an important role in developing safe, sustainable tailings facilities. Les stériles miniers sont produits à partir du traitement des minerais et sont généralement stockés derrière des barrages en remblai. La conception des barrages nécessite l'application de principes d'ingénierie solides et une compréhension des propriétés des résidus. Ce bulletin fournit un cadre pour classer différents types de résidus, allant de l'ultra-fin au grossier, en fonction de leurs propriétés géotechniques et propose des paramètres géotechniques typiques pour les différentes sortes de résidus. Les technologies d'assèchement des résidus pour réduire le risque de stockage continuent à être développées ; les différentes technologies, de l'épaississement à la filtration, en passant par l’application des anciennes technologies, sont présentées pour illustrer les options disponibles et, le cas échéant, les propriétés in situ typiques. Ce bulletin s'adresse à un large public d'intervenants : concepteurs, propriétaires, régulateurs, communautés et organisations diverses et fournit une référence pour communiquer les propriétés des résidus et les avantages et les limites des technologies. Toutes les opérations minières et, par conséquent, les traitements des résidus, sont uniques. Il n'y a pas de solution unique pour tous. La conception des barrages de résidus doit tenir compte des conditions propres au site, telles que le climat, la physiographie, la géochimie, la géomorphologie, la sismologie, les processus miniers, l'environnement et le milieu communautaire, l'application de technologies jouant un rôle important dans le développement de parcs à résidus sûrs et durables.

Download or read book Forensic Geotechnical Engineering written by V.V.S. Rao and published by Springer. This book was released on 2015-08-28 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this edited volume on advances in forensic geotechnical engineering, a number of technical contributions by experts and professionals in this area are included. The work is the outcome of deliberations at various conferences in the area conducted by Prof. G.L. Sivakumar Babu and Dr. V.V.S. Rao as secretary and Chairman of Technical Committee on Forensic Geotechnical Engineering of International Society for Soil Mechanics and Foundation Engineering (ISSMGE). This volume contains papers on topics such as guidelines, evidence/data collection, distress characterization, use of diagnostic tests (laboratory and field tests), back analysis, failure hypothesis formulation, role of instrumentation and sensor-based technologies, risk analysis, technical shortcomings. This volume will prove useful to researchers and practitioners alike.

Download or read book Geotechnical Engineering of Embankment Dams written by Robin Fell and published by Taylor & Francis. This book was released on 1992 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical and Geophysical Site Characterization 4 written by Roberto Quental Coutinho and published by CRC Press. This book was released on 2012-09-06 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book Design Guide for Metal and Nonmetal Tailings Disposal written by R. L. Soderberg and published by . This book was released on 1977 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mineral Processing Plant Design Practice and Control written by Andrew L. Mular and published by SME. This book was released on 2002 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on 138 proceedings papers from October 2002, this broad reference will become the new standard text for colleges and will become a must for engineers, consultants, suppliers, manufacturers.

Download or read book Geotechnical Engineering of Dams 2nd Edition written by Robin Fell and published by CRC Press. This book was released on 2014-11-21 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams. All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping. This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.

Download or read book Geotechnical Synergy in Buenos Aires 2015 written by A.O. Sfriso and published by IOS Press. This book was released on 2015-12-10 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM) and the 6th International Symposium on Deformation Characteristics of Geomaterials, as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy brought together international experts, researchers, academics, professionals and geo-engineering companies in a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the invited lectures of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE) and the 8th South American Congress on Rock Mechanics (SCRM). It includes the Casagrande Lecture delivered by Luis Valenzuela and 21 Plenary, Keynote and Panelist Lectures from these two Buenos Aires conferences.

Download or read book Tailings and Mine Waste 2001 written by A. A. Balkema Publishers and published by CRC Press. This book was released on 2022-01-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers focus on mine and mill tillings and mine waste. The work also contains information on subjects related to: regulations, technical capacities and developments. This guide identifies the current and future issues facing the mining and enviromental concerns.

Download or read book Tailings Management Handbook written by Kimberly Finke Morrison and published by Society for Mining, Metallurgy & Exploration. This book was released on 2022-02-01 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: As long as we have mining and mineral processing, tailings and the responsible management thereof will remain at the forefront, with a company’s environmental, social, and governance (ESG) performance in part a reflection of how well tailings risks are being managed. The Global Industry Standard on Tailings Management (GISTM) was published in August 2020, aiming to prevent catastrophic failure of tailings facilities by providing operators with specified measures and approaches throughout the mine life cycle, taking into account multiple stakeholder perspectives. In 2021, the International Council on Mining & Metals (ICMM) published the Tailings Management: Good Practice Guide intended to support safe, responsible management of tailings across the global mining industry, providing guidance on good governance and engineering practices to support continual improvement in tailings storage facility (TSF) management and help foster and strengthen the safety culture of mining companies. The Tailings Management Handbook is important and timely because there is no other comprehensive resource rooted in these new fundamentals and global principles for tailings management. Tailings management requires interdisciplinary and cross-functional understanding and support, which is apparent throughout this handbook. Dive into the wealth of information contributed by more than 100 world-renowned experts, beautifully crafted into a full-color handbook that focuses on the basics, life-cycle planning, site and tailings characterization, TSF design and construction, as well as systems and operations of TSFs. The inclusion of 42 case studies is an added plus with real-world successes and lessons learned.