Download or read book Geopolymer Concrete Structures with Steel and FRP Reinforcements written by Mohamed Elchalakani and published by Elsevier. This book was released on 2023-02-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geopolymer Concrete Structures with Steel and FRP Reinforcements: Analysis and Design focuses on structural behavior, including the aspects of compression, bending strength and combined action of GPC members, with the book's content based on published studies over the last two decades. Geopolymer concrete (GPC) structural members reinforced with FRP reinforcement have some advantages in resisting forces compared to conventional concrete or steel tubular members. Among the most important are the high strength and bending stiffness, fire and impact performance and favorable, construction ability and durability. To this end, there are no significant applications of these new structural elements worldwide, partly due to the lack of the understanding of their behavior and insufficient design provisions in different design manuals. This book, therefore, seeks to highlight their characteristics and future potential. Provides comprehensive, up-to-date advances on Geopolymer Concrete (GPC) reinforced with steel and FRP bars and stirrups construction with a summary of over 100 papers published in the last decade Compares the behavior and failure modes between Geopolymer Concrete (GPC) structures and Ordinary Portland Concrete (OPC) structures Explains important concepts such as bond, confinement, fracture of stirrups and buckling of FRP bars Includes an in-depth analysis of ultimate strength of GPC and OPC, considering governing failure modes Presents design examples following international standards, including North America ACI 440.1R-15, Canadian CAN/CSA S806, and Australian such as AS 3600
Download or read book Non Metallic FRP Reinforcement for Concrete Structures written by L. Taerwe and published by CRC Press. This book was released on 2004-06-02 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with a wide range of non-metallic materials, this book opens up possibilities of lighter, more durable structures. With contributions from leading international researchers and design engineers, it provides a complete overview of current knowledge on the subject.
Download or read book Reinforced Concrete Design with FRP Composites written by Hota V.S. GangaRao and published by CRC Press. This book was released on 2006-11-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the use of composites has increased in many industrial, commercial, medical, and defense applications, there is a lack of technical literature that examines composites in conjunction with concrete construction. Fulfilling the need for a comprehensive, explicit guide, Reinforced Concrete Design with FRP Composites presents specific informat
Download or read book Fibre reinforced Polymer Reinforcement for Concrete Structures written by Kiang-Hwee Tan and published by World Scientific. This book was released on 2003 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) reinforcement has been used in construction as either internal or external reinforcement for concrete structures in the past decade. This book provides the latest research findings related to the development, design and application of FRP reinforcement in new construction and rehabilitation works. The topics include FRP properties and bond behaviour, externally bonded reinforcement for flexure, shear and confinement, FRP structural shapes, durability, member behaviour under sustained loads, fatigue loads and blast loads, prestressed FRP tendons, structural strengthening applications, case studies, and codes and standards. Contents: .: Volume 1: Keynote Papers; FRP Materials and Properties; Bond Behaviour; Externally Bonded Reinforcement for Flexure; Externally Bonded Reinforcement for Shear; Externally Bonded Reinforcement for Confinement; FRP Structural Shapes; Volume 2: Durability and Maintenance; Sustained and Fatigue Loads; Prestressed FRP Reinforcement and Tendons; Structural Strengthening; Applications in Masonry and Steel Structures; Field Applications and Case Studies; Codes and Standards. Readership: Upper level graduates, graduate students, academics and researchers in materials science and engineering; practising engineers and project managers
Download or read book Fiber Reinforced Plastic FRP Reinforcement for Concrete Structures written by David A. Hensher and published by Elsevier. This book was released on 2016-01-22 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber reinforced plastic (FRP) composites for prestressed and non-prestressed concrete reinforcement has developed into a technology with serious and substantial claims for the advancement of construction materials and methods. Research and development is now occurring worldwide. The 20 papers in this volume make a further contribution in advancing knowledge and acceptance of FRP composites for concrete reinforcement. The articles are divided into three parts. Part I introduces FRP reinforcement for concrete structures and describes general material properties and manufacturing methods. Part II covers a three-continent perspective of current R&D, design and code implementations, and technical organizations' activities. Part III presents an in-depth description of commercially-available products, construction methods, and applications. The work is intended for engineers, researchers, and developers with the objective of presenting them with a world-wide cross-section of initiatives, representative products and significant applications.
Download or read book Rehabilitation of Concrete Structures with Fiber Reinforced Polymer written by Riadh Al-Mahaidi and published by Butterworth-Heinemann. This book was released on 2018-11-12 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of Concrete Structures with Fiber Reinforced Polymer is a complete guide to the use of FRP in flexural, shear and axial strengthening of concrete structures. Through worked design examples, the authors guide readers through the details of usage, including anchorage systems, different materials and methods of repairing concrete structures using these techniques. Topics include the usage of FRP in concrete structure repair, concrete structural deterioration and rehabilitation, methods of structural rehabilitation and strengthening, a review of the design basis for FRP systems, including strengthening limits, fire endurance, and environmental considerations. In addition, readers will find sections on the strengthening of members under flexural stress, including failure modes, design procedures, examples and anchorage detailing, and sections on shear and torsion stress, axial strengthening, the installation of FRP systems, and strengthening against extreme loads, such as earthquakes and fire, amongst other important topics. Presents worked design examples covering flexural, shear, and axial strengthening Includes complete coverage of FRP in Concrete Repair Explores the most recent guidelines (ACI440.2, 2017; AS5100.8, 2017 and Concrete society technical report no. 55, 2012)
Download or read book FRP Reinforcement in RC Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2007-01-01 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 40 deals mainly with the use of FRP bars as internal reinforcement for concrete structures. The background of the main physical and mechanical properties of FRP reinforcing bars is presented, with special emphasis on durability aspects. For each of the typical ultimate and serviceability limit states, the basic mechanical model is given, followed by different design models according to existing codes or design guidelines. Composite FRP materials are still relatively new in construction and most engineers are unfamiliar with their properties and characteristics. The second chapter of this bulletin therefore aims to provide practising engineers with the necessary background knowledge in this field, and also presents typical products currently available in the international market. The third chapter deals with the issue of durability and identifies the parameters that can lead to deterioration, which is necessary information when addressing design issues. A series of parameters is used to identify the allowable stress in the FRP after exposure for a specified period of time in a specific environment. The bulletin covers the issues of Ultimate Limit States (primarily dealing with flexural design), Serviceability Limit States (dealing with deflections and cracking), Shear and Punching Shear and Bond and Tension Stiffening. It provides not only the state-of-the-art but also in many cases ideas for the next generation of design guidelines. The final chapter deals with the fundamental issue of design philosophy. The use of these new materials as concrete reinforcement has forced researchers to re-think many of the fundamental principles used until now in RC design. The bulletin ends with a discussion of a possible new framework for developing partial safety factors to ensure specific safety levels that will be flexible enough to cope with new materials.
Download or read book Analysis and Design of FRP Reinforced Concrete Structures written by Shamsher Bahadur Singh and published by McGraw Hill Professional. This book was released on 2015-02-05 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Complete FRP Reinforced Concrete Structure Analysis and Design Guide This comprehensive reference provides proven design procedures for the use of fiber-reinforced polymer (FRP) materials for reinforcement, prestressing, and strengthening of reinforced concrete structures. The characteristics of FRP composite materials as well as the latest manufacturing techniques are discussed. Detailed illustrations and tables, design equations, end-of-chapter problems, and real-world case studies are included in this authoritative resource. Analysis and Design of FRP Reinforced Concrete Structures covers: Material characteristics of FRP bars History and uses of FRP technology Design of RC structures reinforced with FRP bars Design philosophy for FRP external strengthening systems Durability-based design approach for external FRP strengthening of RC beams
Download or read book FRP Composites for Reinforced and Prestressed Concrete Structures written by Perumalsamy Balaguru and published by CRC Press. This book was released on 2008-11-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a number of countries including USA, Japan, Europe and China, but until now designers have had no publication which provides practical guidance or accessible coverage of the fundamentals. This book fills this void. It deals with the fundamentals of composites, and basic design principles, and provides step-by-step guidelines for design. Its main theme is the repair and retrofit of un-reinforced, reinforced and prestressed concrete structures using carbon, glass and other high strength fibre composites. In the case of beams, the focus is on their strengthening for flexure and shear or their stiffening. The main interest with columns is the improvement of their ductility; and both strengthening and ductility improvement of un-reinforced structures are covered. Methods for evaluating the strengthened structures are presented. Step by step procedures are set out, including flow charts, for the various structural components, and design examples and practice problems are used to illustrate. As infrastructure ages worldwide, and its demolition and replacement becomes less of an option, the need for repair and retrofit of existing facilities will increase. Besides its audience of design professionals, this book suits graduate and advanced undergraduate students.
Download or read book Strengthening of Concrete Structures Using Fiber Reinforced Polymers FRP written by Hwai-Chung Wu and published by Woodhead Publishing. This book was released on 2017-02-21 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP): Design, Construction and Practical Applications presents a best practice guide on the structural design and strengthening of bridge structures using advanced Fiber Reinforced Polymer (FRP) composites. The book briefly covers the basic concepts of FRP materials and composite mechanics, while focusing on practical design and construction issues, including inspection and quality control, paying special attention to the differences in various design codes (US, Japan, and Europe) and recommendations. At present, several design guides from the US, Japan, and Europe are available. These guidelines are often inconsistent and do not cover all necessary design and inspection issues to the same degree of detail. This book provides a critical review and comparison of these guidelines, and then puts forward best practice recommendations, filling a significant gap in the literature, and serving as an important resource for engineers, architects, academics, and students interested in FRP materials and their structural applications. Written from a practitioner's point-of-view, it is a valuable design book for structural engineers all over the world. Includes a large quantity of design examples and structural software to facilitate learning and help readers perform routine design Provides recommendations for best practices in design and construction for the strengthening of bridge structures using advanced fiber-reinforced polymer (FRP) composites Presents comprehensive guidelines on design, inspection, and quality control, including laboratory and field testing information
Download or read book Reinforced Concrete with FRP Bars written by Antonio Nanni and published by CRC Press. This book was released on 2014-03-05 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion-resistant, electromagnetic transparent and lightweight fiber-reinforced polymers (FRPs) are accepted as valid alternatives to steel in concrete reinforcement. Reinforced Concrete with FRP Bars: Mechanics and Design, a technical guide based on the authors more than 30 years of collective experience, provides principles, algorithms, and pr
Download or read book Report on Fiber Reinforced Polymer FRP Reinforcement for Concrete Structures written by ACI Committee 440 and published by . This book was released on 2007 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternative Materials for the Reinforcement and Prestressing of Concrete written by J.L. Clarke and published by CRC Press. This book was released on 2003-09-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of steel reinforcement in concrete is a major problem, with serious implications for structural integrity and durability particularly for bridges and marine structures. This new book provides a thorough overview of recent developments and applications in this area. It examines the durability, strength and suitability of alternative materials.
Download or read book Retrofitting of Concrete Structures by Externally Bonded FRPs With Emphasis on Seismic Applications written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 35 is the first bulletin to publish documentation from an fib short course. These courses are held worldwide and cover advanced knowledge of structural concrete in general, or specific topics. They are organized by fib and given by internationally recognized experts in fib, often supplemented with local experts active in fib. They are based on the knowledge and expertise from fib's ten Commissions and nearly fifty Task Groups. fib Bulletin 35 presents the course materials developed for the short course "Retrofitting of Concrete Structures through Externally Bonded FRP, with emphasis on Seismic Applications", given in Ankara and Istanbul in June 2005. The course drew on expertise both from outside Turkey and from the large pool of local experts on this subject. In most countries of the world, the building stock is ageing and needs continuous maintenance or repair. Moreover, the majority of existing constructions are deficient in the light of current knowledge and design codes. The problem of structural deficiency of existing constructions is especially acute in seismic regions, as, even there, seismic design of structures is relatively recent. The direct and indirect costs of demolition and reconstruction of structurally deficient constructions are often prohibitive; furthermore they entail a substantial waste of natural resources and energy. Therefore, structural retrofitting is becoming increasingly widespread throughout the world. Externally bonded Fibre Reinforced Polymers (FRPs) are rapidly becoming the technique of choice for structural retrofitting. They are cleaner and easier to apply than conventional retrofitting techniques, reduce disruption to the occupancy and operation of the facility, do not generate debris or waste, and reduce health and accident hazards at the construction site as well as noise and air pollution in the surroundings. fib Bulletin 35 gives state-of-the-art coverage of retrofitting through FRPs and presents relevant provisions from three recent standardisation milestones: EN 1998-3:2005 "Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings", the 2005 Draft of the Turkish seismic design code, and the Italian regulatory document CNR-DT 200/04, "Instructions for Design, Execution and Control of Strengthening Interventions by Means of Fibre-Reinforced Composites" (2004).
Download or read book Strengthening of Concrete Structures written by Amr Abdelrahman and published by Springer Nature. This book was released on 2023-01-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents unified design approach for strengthening concrete members with different techniques such as concrete, steel, and FRP jacketing. Preference between the various techniques is explained in light of strengthening limits, procedures, and application for each case. Examples for evaluation of existing structures and design equations for strengthening concrete elements are presented based on the ACI design codes and standards. Numerical examples are also given for different strengthening techniques with illustrations for the construction methodology and detailing for each case.Several case studies are explained starting from problem diagnosis, structure analysis, proposal for different strengthening methodologies, and implementation procedure for the selected scheme. The case studies include structures subjected to gravity loads, lateral loads, elevated temperature, and differential settlement of the foundations. It addresses design and construction errors, environmental impact, and soil movement. The case studies include conventional reinforced concrete, post-tensioned, and precast concrete members.
Download or read book Guide for the Design and Construction of Concrete Reinforced with FRP Bars written by ACI Committee 440 and published by . This book was released on 2001 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Filled Double Skin Steel Tubular Columns written by Mostafa Fahmi Hassanein and published by Elsevier. This book was released on 2023-02-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete-Filled Double-Skin Steel Tubular Columns: Behavior and Design provides a thorough review of the recent advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns. Drawing on their extensive knowledge and research, the authors cover topics such as different CFDST columns under axial compression, innovative techniques including the use of rubberised concrete, columns with different cross-sections, and steel material envelops and failure modes. This book is an overview of research carried out by this highly experienced and leading research group with specialist knowledge in the topic. It is an invaluable resource for researchers, graduates and post-graduate civil engineers and civil engineering designers. Provides a comprehensive overview of advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns over the past decade Gives deep-dive explanation of important concepts such as the void ratio which makes these girders different from conventional concrete-filled steel tubular (CFST) columns Explains the failure modes of short and slender columns under compression, with detailed illustrations and photos from both real-life and virtual tests performed by the authors Presents in-depth analysis of the ultimate strengths of CFDST columns with different steel envelops and concrete infills Makes a detailed comparison with available international codes, such as Eurocode 3, and provides recommendations for future studies Discusses new innovative confining stress-based design for different types of CFDST short columns
