Download or read book Geometry of Single point Turning Tools and Drills written by Viktor P. Astakhov and published by Springer Science & Business Media. This book was released on 2010-07-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometry of Single-Point Turning Tools and Drills outlines clear objectives of cutting tool geometry selection and optimization, using multiple examples to provide a thorough explanation. It addresses several urgent problems that many present-day tool manufacturers, tool application specialists, and tool users, are facing. It is both a practical guide, offering useful, practical suggestions for the solution of common problems, and a useful reference on the most important aspects of cutting tool design, application, and troubleshooting practices. Covering emerging trends in cutting tool design, cutting tool geometry, machining regimes, and optimization of machining operations, Geometry of Single-Point Turning Tools and Drills is an indispensable source of information for tool designers, manufacturing engineers, research workers, and students.
Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.
Download or read book Cutting Tool Applications written by George Schneider (Jr.) and published by . This book was released on 2002 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MANUFACTURING PROCESSES 4 5 PRODUCT ID 23994334 written by LAMNGEUN. VIRASAK and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Tool Design Fifth Edition written by Society of Manufacturing Engineers and published by Society of Manufacturing Engineers. This book was released on 2003-12-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The creation of a Fifth Edition is proof of the continuing vitality of the book's contents, including: tool design and materials; jigs and fixtures; workholding principles; die manipulation; inspection, gaging, and tolerances; computer hardware and software and their applications; joining processes, and pressworking tool design. To stay abreast of the newer developments in design and manufacturing, every effort has been made to include those technologies that are currently finding applications in tool engineering. For example, sections on rapid prototyping, hydroforming, and simulation have been added or enhanced. The basic principles and methods discussed in Fundamentals of Tool Design can be used by both students and professionals for designing efficient tools.
Download or read book MACHINING AND MACHINE TOOLS With CD written by A.B.Chattopadhyay and published by John Wiley & Sons. This book was released on 2011-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: Primary MarketMechanical Engineering students. UG students of the allied disciplines like Manufacturing Engineering, Production Engineering, Industrial Engineering, Aero. Engg, Automobile Engg, Manuf. Sc. & Engg. Students in PG and Dual Degree.Secondary MarketStudents and young professionals trying for AMIE certificate from the Institution of Engineers where also machining and machine tools is a compulsory subject for the Mechanical Engineering stream. The candidates preparing for the competitive examinations like IES, IRSE, IFS, etc. will also be benefited by this book. Special Features: · Comprehensive coverage from basic to advanced topics· Lucid and simple-to-understand style of explanation· Key concepts are driven home with apt examples and solved problems· Visual recall is enhanced by the clear artwork accompanying all the concepts· Solved and unsolved problems are included to inculcate problem-solving abilities in the reader· This book has been pedagogically enriched with: ü 600 line diagrams and photographs of all types of machine tools and instruments used in manufacturing processesü 100+ solved problems and examplesü 120+ unsolved problemsü 430+ objective type questions, with special focus on competitive examsü Nearly 600 review questions (long and short answer) covering all topics for university examsCD Companion:· Answers to multiple-choice questions· Chapters wise References· Bibliography · Two Model Question Papers About The Book: Machining and machine tools is a text targeted towards the students and teachers for the undergraduate Manufacturing Processes course in the Mechanical Engineering discipline. Post graduate students in the production and manufacturing streams will also find this book a good reference.This book brings a holistic approach to the understanding of machine tools and manufacturing processes, giving equal emphasis to historical background and chronological development, and to modern developments in manufacturing and contemporary machining processes. With the help of lucid explanations coupled with striking examples and accompanying visual aids, the book begins from the very basics and gradually builds reader understanding up to the advanced topics in this field.This is also a handy text for practising professionals as it contains all the relevant tables, data and figures, and can act as a quick reference.
Download or read book Drills written by Viktor P. Astakhov and published by CRC Press. This book was released on 2014-04-08 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a presentation that balances theory and practice, Drills: Science and Technology of Advanced Operations details the basic concepts, terminology, and essentials of drilling. The book addresses important issues in drilling operations, and provides help with the design of such operations. It debunks many old notions and beliefs while introducing sc
Download or read book High Productivity Drilling Tools written by Viktor P. Astakhov and published by CRC Press. This book was released on 2024-05-03 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated volume covers the design, manufacturing, and inspection of high‐productivity drilling tools (HPDT) and addresses common issues with drilling system components. It discards old notions and beliefs as it introduces scientifically and technically sound concepts and rules with detailed explanations and multiple practical examples. High‐Productivity Drilling Tools: Design and Geometry introduces the development of the concept of high‐productivity (HP) drill design and its manufacturing and application features. This book continues to develop the concept of a drilling system in the new edition and includes new practical examples. It explains how to properly design and manufacture drilling tools for a specific application and includes a detailed explanation of the design features, tool manufacturing and implementation practices, metrology of drilling and drilling tools, and the tool failure analysis. Using the coherency law as the guidelines introduced in the first edition, the new edition shows how to formulate the requirements for the components of the drilling system, pointing out that the drilling tool is the key component to be improved. This practical book should be on the shelves of all industrial engineers, those working in production and manufacturing, process designers, tool material designers, cutting tool designers, and quality specialists. Researchers, senior undergraduate students, and graduate students will also find this book full of very helpful reference information. This book is also available as a set - Drills: High-Productivity Drilling Tools, 2-Volume Set (9781032203508).
Download or read book Nanofinishing Science and Technology written by Vijay Kumar Jain and published by CRC Press. This book was released on 2016-12-12 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finishing is the final operation after a part is sized and shaped. Currently in high tech industries, there is a demand for nano level surface finishing of components. This process is done to improve the surface finish, to remove the recast layer, or to remove surface and sub-surface defects. The result is low friction, longer product life, and low power requirements. Equally important is the aesthetic aspect of the product. This subject is growing very fast from the technology as well as a science point of view. Books on this subject are very limited, particularly those ones that deal with both the science as well as the technology aspects.
Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.
Download or read book Machining of Hard Materials written by Manjunath Patel G. C. and published by Springer Nature. This book was released on 2020-02-14 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the potential applications of hard materials as well as the latest trends and challenges in machining hard materials. Models for online monitoring to adjust parameters to obtain desired machining characteristics (i.e. reverse modelling) are discussed in this book. The conflicting requirements (i.e. maximize: material removal rate, roundness and minimize: surface roughness, dimensional ovality, co axiality, tool wear) in machining for industry personal is solved using advanced optimization tools. In addition, the framework for experimental modelling, predictive physic-based forward and reverse process models and optimization for better machining characteristics applicable to industry are proposed.
Download or read book Additive and Subtractive Manufacturing written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) and subtractive manufacturing (SM) offer numerous advantages in the production of single and multiple components. They provide incomparable design independence and are used to fabricate products in several industries, e.g.: aeronautic, automotive, biomedical, etc. The book presents recent results of processes including 3D printing, SLS (selective laser sintering), EBM (electron beam melting) and Precise Cutting and Drilling.
Download or read book Modern Machining Technology written by J. Paulo Davim and published by Elsevier. This book was released on 2011-10-18 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This forward-thinking, practical book provides essential information on modern machining technology for industry with emphasis on the processes used regularly across several major industries. Machining technology presents great interest for many important industries including automotive, aeronautics, aerospace, renewable energy, moulds and dies, biomedical, and many others. Machining processes are manufacturing processes in which parts are shaped by the removal of unwanted material; these processes cover several stages and are usually divided into the following categories: cutting (involving single point or multipoint cutting tools); abrasive processes (including grinding and advanced machining processes, such as EDM (electrical discharge machining), LBM (laser-beam machining), AWJM (abrasive water jet machining) and USM (ultrasonic machining). - Provides essential information on modern machining technology, with emphasis on the processes used regularly across several major industries - Covers several processes and outlines their many stages - Contributions come from a series of international, highly knowledgeable and well-respected experts
Download or read book Tribology in Manufacturing Technology written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to show how tribological concepts can be applied in order to improve manufacturing technology in modern industry. It can be used as a guide book for engineering students or a reference useful for academics in the fields of tribology, manufacturing, materials and mechanical engineering.
Download or read book Industrial Measurements in Machining written by Grzegorz M. Królczyk and published by Springer Nature. This book was released on 2020-07-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the best papers from two conferences on machining and abrasive machining, organized in Poland on September 11-12, 2019. The chapters discuss classical topics and emerging methods and models in machining, measurement, and quality control. They cover new technologies, such as water jet machining, discuss important topics such as energy efficiency in machining, and analyze different cutting methods, materials and mechanisms.
Download or read book Machinability of Advanced Materials written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2014-02-19 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters. A variety of factors determine a material’s machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.
Download or read book Traditional Machining Processes written by J. Paulo Davim and published by Springer. This book was released on 2014-10-31 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects several examples of research in machining processes. Chapter 1 provides information on polycrystalline diamond tool material and its emerging applications. Chapter 2 is dedicated to the analysis of orthogonal cutting experiments using diamond-coated tools with force and temperature measurements. Chapter 3 describes the estimation of cutting forces and tool wear using modified mechanistic models in high performance turning. Chapter 4 contains information on cutting under gas shields for industrial applications. Chapter 5 is dedicated to the machinability of magnesium and its alloys. Chapter 6 provides information on grinding science. Finally, chapter 7 is dedicated to flexible integration of shape and functional modelling of machine tool spindles in a design framework.
