Download or read book Geometrical Optics and Optical Design written by Pantazis Mouroulis and published by Oxford Series in Optical & Ima. This book was released on 1997 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometrical Optics and Optical Design is an up-to-date introductory treatment of geometrical optics which is intended to lead students toward the modern practices of computer-aided optical design. The principles of Gaussian optics and first-order layout and design are emphasized, based on the tracing of two paraxial rays and the associated optical invariant. The radiometry of lens systems is seen to rest on the same concepts. Third-order aberration theory is developed in detail. Complete examples of third-order design are provided, together with software tools that allow students to follow the examples in detail or to develop other examples independently. Several problems at the end of each chapter allow students to practice and extend the concepts taught.
Download or read book Geometric Optics written by Antonio Romano and published by Birkhäuser. This book was released on 2016-09-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book—unique in the literature—provides readers with the mathematical background needed to design many of the optical combinations that are used in astronomical telescopes and cameras. The results presented in the work were obtained by using a different approach to third-order aberration theory as well as the extensive use of the software package Mathematica®. Replete with workout examples and exercises, Geometric Optics is an excellent reference for advanced graduate students, researchers, and practitioners in applied mathematics, engineering, astronomy, and astronomical optics. The work may be used as a supplementary textbook for graduate-level courses in astronomical optics, optical design, optical engineering, programming with Mathematica, or geometric optics.
Download or read book Modern Geometrical Optics written by Richard Ditteon and published by Wiley-Interscience. This book was released on 1997-11-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: From basic terms and concepts to advanced optimization techniques-a complete, practical introduction to modern geometrical optics Most books on geometrical optics present only matrix methods. Modern Geometrical Optics, although it covers matrix methods, emphasizes y-nu ray tracing methods, which are used most commonly by optical engineers and are easier to adapt to third-order optics and y-??? diagrams. Moving by logical degrees from fundamental principles to advanced optical analysis and design methods, this book bridges the gap between the optical theory taught in introductory physics texts and advanced books on lens design. Providing the background material needed to understand advanced material, it covers important topics such as field of view, stops, pupils and windows, exact ray tracing, image quality, and optimization of the image. Important features of Modern Geometrical Optics include: * Examples of all important techniques presented * Extensive problem sets in each chapter * Optical analysis and design software * Chapters covering y-??? diagrams, optimization, and lens design This book is both a primer for professionals called upon to design optical systems and an ideal text for courses in modern geometrical optics. Companion Software Special lens design and analysis software capable of solving all problems presented in the book is available via Wiley's FTP site. This software also serves as an introduction to the use of commercial lens design software. Appendix C is a user's manual for the software.
Download or read book Handbook of Optical Design written by Daniel Malacara-Hernández and published by CRC Press. This book was released on 2003-09-21 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infused with more than 500 tables and figures, this reference clearly illustrates the intricacies of optical system design and evaluation and considers key aspects of component selection, optimization, and integration for the development of effective optical apparatus. The book provides a much-needed update on the vanguard in the field with vivid e
Download or read book Fundamentals of Geometrical Optics written by Virendra N. Mahajan and published by Society of Photo Optical. This book was released on 2014-06-03 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical imaging starts with geometrical optics, and ray tracing lies at its forefront. This book starts with Fermat’s principle and derives the three laws of geometrical optics from it. After discussing imaging by refracting and reflecting systems, paraxial ray tracing is used to determine the size of imaging elements and obscuration in mirror systems. Stops, pupils, radiometry, and optical instruments are also discussed. The chromatic and monochromatic aberrations are addressed in detail, followed by spot sizes and spot diagrams of aberrated images of point objects. Each chapter ends with a summary and a set of problems. The book ends with an epilogue that summarizes the imaging process and outlines the next steps within and beyond geometrical optics.
Download or read book Optical System Design written by Rudolf Kingslake and published by Academic Press. This book was released on 2012-12-02 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical System Design covers the basic knowledge of optics and the flow of light through an optical system. This book is organized into 16 chapters that deal with various components of an optical system, from light and images to spectroscopic apparatus. The book first discusses the simple components of an optical system, including its light, lens, oblique beams, and photochemical aspects. It then deals with the system’s projection, plane mirrors, prisms, magnifying instruments, and telescope. Other components considered are the surveying instruments, mirror imaging systems, photographic optics, and spectroscopic apparatus. This book is of value to undergraduate students with courses in geometrical optics and system design.
Download or read book Fundamental Optical Design written by Michael J. Kidger and published by SPIE Press. This book was released on 2002 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides all the essential and best elements of Kidger's many courses taught worldwide on lens and optical design. It is written in a direct style that is compact, logical, and to the point--a tutorial in the best sense of the word. "I read my copy late last year and read it straight through, cover to cover. In fact, I read it no less than three times. Its elegant expositions, valuable insights, and up-front espousal of pre-design theory make it an outstanding work. It's in the same league with Conrady and Kingslake." Warren Smith.
Download or read book Field Guide to Geometrical Optics written by John E. Greivenkamp and published by Society of Photo Optical. This book was released on 2004 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Guide derives from the treatment of geometrical optics that has evolved from both the undergraduate and graduate programs at the Optical Sciences Center at the University of Arizona. The development is both rigorous and complete, and it features a consistent notation and sign convention. This volume covers Gaussian imagery, paraxial optics, first-order optical system design, system examples, illumination, chromatic effects, and an introduction to aberrations. The appendices provide supplemental material on radiometry and photometry, the human eye, and several other topics.
Download or read book A Course in Lens Design written by Chris Velzel and published by Springer. This book was released on 2014-03-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Course in Lens Design is an instruction in the design of image-forming optical systems. It teaches how a satisfactory design can be obtained in a straightforward way. Theory is limited to a minimum, and used to support the practical design work. The book introduces geometrical optics, optical instruments and aberrations. It gives a description of the process of lens design and of the strategies used in this process. Half of its content is devoted to the design of sixteen types of lenses, described in detail from beginning to end. This book is different from most other books on lens design because it stresses the importance of the initial phases of the design process: (paraxial) lay-out and (thin-lens) pre-design. The argument for this change of accent is that in these phases much information can be obtained about the properties of the lens to be designed. This information can be used in later phases of the design. This makes A Course in Lens Design a useful self-study book and a suitable basis for an introductory course in lens design. The mathematics mainly used is college algebra, in a few sections calculus is applied. The book could be used by students of engineering and technical physics and by engineers and scientists.
Download or read book New Methods in Geometrical Optics written by Charles Sheldon Hastings and published by . This book was released on 1927 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Computation Methods for Geometrical Optics written by Psang Dain Lin and published by Springer. This book was released on 2013-10-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book employs homogeneous coordinate notation to compute the first- and second-order derivative matrices of various optical quantities. It will be one of the important mathematical tools for automatic optical design. The traditional geometrical optics is based on raytracing only. It is very difficult, if possible, to compute the first- and second-order derivatives of a ray and optical path length with respect to system variables, since they are recursive functions. Consequently, current commercial software packages use a finite difference approximation methodology to estimate these derivatives for use in optical design and analysis. Furthermore, previous publications of geometrical optics use vector notation, which is comparatively awkward for computations for non-axially symmetrical systems.
Download or read book Optical Design written by Max J. Riedl and published by Society of Photo Optical. This book was released on 2009-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is written for engineers and scientists who have some experience in the field of optics and want to know more about the details and derivations of equations used in optical design. Organized by topic, the book begins with the fundamental law of geometrical optics, Snell's law of refraction, and states the paraxial ray trace equations, then moves on to thin lenses and increasingly more sophisticated components and multi-element systems. Each topic is covered in depth and provides comprehensive information on performance and limitations. While the text is based on general optical laws, special emphasis has been placed on the two major infrared regions--the mid-wave (MWIR) and the long-wave (LWIR). This is particularly important with regard to diffractive hybrids, which have found their place in these long-wavelength areas for the correction of chromatic aberrations and athermalization. Comments relating to single-point diamond turning have also been included because this process is predominantly used to produce optical elements for the infrared regions.
Download or read book A Practical Guide to Experimental Geometrical Optics written by Yuriy A. Garbovskiy and published by Cambridge University Press. This book was released on 2017-12-28 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, yet deep introduction to geometrical optics, developing the practical skills and research techniques routinely used in modern laboratories. Suitable for both students and self-learners, this accessible text teaches readers how to build their own optical laboratory, and design and perform optical experiments.
Download or read book Geometrical Optics written by H.G. Zimmer and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometrical optics is no longer fashionable. Research workers do not expect significant new discoveries to be made in this field of classical physics. Teachers avoid the subject because its use for many generations in arid mathematical exercises has robbed it of all freshness and stimulus, with the result that it no longer seems relevant to a modern physics course. There remains - and perhaps this has grown in recent year- the technical significance of geometrical optics. It provides the basis for the design of optical instruments for use in everyday life as well as for scientific and industrial purposes. This small book is intended to treat two aspects of the subject: the laws of geometrical optics and their application to the design of optical instruments. The theory is not based on Snell's law of refraction but on a conservation law for the radiated energy. The subject can then be treated in a manner appropriate to contemporary physics: auxiliary geometrical parameters become unnecessary and the singularities resulting from their use vanish. The laws of geometrical optics can be formulated much more simply and their physical significance is revealed more clearly. I have tried to present the material in a form satisfactory both to teachers and to workers in the technical applications of optics. The content has thus been deliberately kept within the limits of a pocket book.
Download or read book Lens Design written by Haiyin Sun and published by CRC Press. This book was released on 2016-12-19 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Lens Design focuses on the very detailed practical process of lens design. Every step from setup specifications to finalizing the design for production is discussed in a straight forward, tangible way. Design examples of several widely used modern lenses are provided. Optics basics are introduced and basic functions of Zemax are described. Zemax will be used throughout the book.
Download or read book Handbook of Optical Design written by Daniel Malacara-Hernández and published by CRC Press. This book was released on 2017-12-19 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also discusses component selection, optimization, and integration for the development of effective optical apparatus. The authors analyze the performance of a wide range of optical materials, components, and systems, from simple magnifiers to complex lenses used in photography, ophthalmology, telescopes, microscopes, and projection systems. Throughout, the book includes a wealth of design examples, illustrations, and equations, most of which are derived from basic principles. Appendices supply additional background information. What’s New in This Edition Improved figures, including 32 now in color Updates throughout, reflecting advances in the field New material on Buchdahl high-order aberrations Expanded and improved coverage of the calculation of wavefront aberrations based on optical path An updated list of optical materials in the appendix A clearer, more detailed description of primary aberrations References to important new publications Optical system design examples updated to include newly available glasses 25 new design examples This comprehensive book combines basic theory and practical details for the design of optical systems. It is an invaluable reference for optical students as well as scientists and engineers working with optical instrumentation.
Download or read book Introduction to Aberrations in Optical Imaging Systems written by José Sasián and published by Cambridge University Press. This book was released on 2013 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible, well presented introduction to the theory of optical aberrations, covering key topics that are often missing from comparable books.
