Download or read book Basics of Computer Aided Geometric Design written by M. Ganesh and published by I. K. International Pvt Ltd. This book was released on 2011-10-06 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to provide a good foundation of Computer-Aided Geometric Design to students who are doing under-graduate courses in engineering, especially Mechanical Engineering, Computer Science, Geometric Modeling and CAD/CAM. This book is organized in two parts. Part-I deals with the basics of differential geometry of curves and surface, a good understanding of which is essential prerequisite to what follows in the Part-II. Part-II is devoted entirely to the geometric designs of curves and surfaces, which are used in the development of computer graphics and profiles and hulls of ships, aircraft wings, satellites (to name a few large scale products) as also telephones, mobile phones, fancy flower vases (to name a few small-scale products). Concepts introduced are illustrated with examples, which are completely worked out. A list of problems is also given at the end of each chapter
Download or read book Geometric functions in computer aided geometric design written by Oscar Ruiz and published by Universidad EAFIT. This book was released on 2020-06-24 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is usual that existing material on computer aided geometric design oscillates between over-simplification for programmers and practitioners and over formalism for scientific or academic readers. The first type of publications suppresses the taxonomy and properties of the mathematical concepts discussed when seeking straightforward notation and procedures. The second type of materials in thorough in the mathematical concepts at the expense of increasingly complicated notation and sacrifice of clear procedures for the reader.This book intends to be a compromise between the aforementioned extremes. It recalls basic concepts on functions, relations, transformations, matrices and groups and makes evident their impact in the engineering properties of projections, rotations, translations, perspectives, and so on. The material is of interest for computer scientists and electrical, mechanical, production, mathematical and physics engineers. In particular, it gives valuable insight into robotics, computer vision, design, manufacturing, kinematics and dynamics from a practical point of view while keeping contact whit the underlying decisive mathematical properties of the objects and transformations handled.The exercises and examples discussed in this book were stated, solved, documented and illustrated under the supervision of professors Oscar Ruiz and Carlos Cadavid during the years 2004 to 2007. Scenarios for such a work were the courses introduction to CAD CAM Systems and Geometric Modeling and the activities in the CAD CAM CAE laboratory at EAFIT University.This book intends to be a compromise between the aforementioned extremes. It recalls basic concepts on functions, relations, transformations, matrices and groups and makes evident their impact in the engineering properties of projections, rotations, translations, perspectives, and so on. The material is of interest for computer scientists and electrical, mechanical, production, mathematical and physics engineers. In particular, it gives valuable insight into robotics, computer vision, design, manufacturing, kinematics and dynamics from a practical point of view while keeping contact whit the underlying decisive mathematical properties of the objects and transformations handled.The exercises and examples discussed in this book were stated, solved, documented and illustrated under the supervision of professors Oscar Ruiz and Carlos Cadavid during the years 2004 to 2007. Scenarios for such a work were the courses introduction to CAD CAM Systems and Geometric Modeling and the activities in the CAD CAM CAE laboratory at EAFIT University.The exercises and examples discussed in this book were stated, solved, documented and illustrated under the supervision of professors Oscar Ruiz and Carlos Cadavid during the years 2004 to 2007. Scenarios for such a work were the courses introduction to CAD CAM Systems and Geometric Modeling and the activities in the CAD CAM CAE laboratory at EAFIT University.
Download or read book Computer Aided Geometric Design written by Robert E. Barnhill and published by Academic Press. This book was released on 2014-05-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Geometric Design covers the proceedings of the First International Conference on Computer Aided Geometric Design, held at the University of Utah on March 18-21, 1974. This book is composed of 15 chapters and starts with reviews of the properties of surface patch equation and the use of computers in geometrical design. The next chapters deal with the principles of smooth interpolation over triangles and without twist constraints, as well as the graphical representation of surfaces over triangles and rectangles. These topics are followed by discussions of the B-spline curves and surfaces; mathematical and practical possibilities of UNISURF; nonlinear splines; and some piecewise polynomial alternatives to splines under tension. Other chapters explore the smooth parametric surfaces, the space curve as a folded edge, and the interactive computer graphics application of the parametric bi-cubic surface to engineering design problems. The final chapters look into the three-dimensional human-machine communication and a class of local interpolating splines. This book will prove useful to design engineers.
Download or read book Handbook of Computer Aided Geometric Design written by G. Farin and published by Elsevier. This book was released on 2002-08-13 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive coverage of the fields Geometric Modeling, Computer-Aided Design, and Scientific Visualization, or Computer-Aided Geometric Design. Leading international experts have contributed, thus creating a one-of-a-kind collection of authoritative articles. There are chapters outlining basic theory in tutorial style, as well as application-oriented articles. Aspects which are covered include: Historical outline Curve and surface methods Scientific Visualization Implicit methods Reverse engineering. This book is meant to be a reference text for researchers in the field as well as an introduction to graduate students wishing to get some exposure to this subject.
Download or read book Curves and Surfaces in Computer Aided Geometric Design written by Fujio Yamaguchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains various types of mathematical descriptions of curves and surfaces, such as Ferguson, Coons, Spline, Bézier and B-spline curves and surfaces. The materials are classified and arranged in a unified way so that beginners can easily understand the whole spectrum of parametric curves and surfaces. This book will be useful to many researchers, designers, teachers, and students who are working on curves and surfaces. The book can be used as a textbook in computer aided design classes.
Download or read book Curves and Surfaces for Computer aided Geometric Design written by Gerald E. Farin and published by . This book was released on 1997 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer disk contains: "data sets, as well as all of the C routines found in the book."
Download or read book Curves and Surfaces for Computer Aided Geometric Design written by Gerald Farin and published by Elsevier. This book was released on 2014-06-28 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A leading expert in CAGD, Gerald Farin covers the representation, manipulation, and evaluation of geometric shapes in this the Third Edition of Curves and Surfaces for Computer Aided Geometric Design. The book offers an introduction to the field that emphasizes Bernstein-Bezier methods and presents subjects in an informal, readable style, making this an ideal text for an introductory course at the advanced undergraduate or graduate level. The Third Edition includes a new chapter on Topology, offers new exercises and sections within most chapters, combines the material on Geometric Continuity into one chapter, and updates existing materials and references. Implementation techniques are addressed for practitioners by the inclusion of new C programs for many of the fundamental algorithms. The C programs are available on a disk included with the text. System Requirements: IBM PC or compatibles, DOS version 2.0 or higher. Covers representation, manipulation, and evaluation of geometric shapes Emphasizes Bernstein-Bezier methods Written in an informal, easy-to-read style
Download or read book Shape Preserving Representations in Computer aided Geometric Design written by Juan M. Peña and published by Nova Publishers. This book was released on 1999 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents recent important advances in the field of computer-aided geometric design in the study of shape-preserving representations of curves and surfaces. The volume's dozen papers are organized into five sections on: shape preserving representations of curves, optimality of B-bases, blossoming and geometric approach, shape preserving representations of surfaces, and trigonometric bases for the representation of curves and surfaces. The index spans the admissible (in design algorithms for spline curves) to the weak Chebyshev space and system. Contributors hail from six European countries. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Mathematical Methods in Computer Aided Geometric Design II written by Tom Lyche and published by Academic Press. This book was released on 2014-05-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Methods in Computer Aided Geometric Design II covers the proceedings of the 1991 International Conference on Curves, Surfaces, CAGD, and Image Processing, held at Biri, Norway. This book contains 48 chapters that include the topics of blossoming, cyclides, data fitting and interpolation, and finding intersections of curves and surfaces. Considerable chapters explore the geometric continuity, geometrical optics, image and signal processing, and modeling of geological structures. The remaining chapters discuss the principles of multiresolution analysis, NURBS, offsets, radial basis functions, rational splines, robotics, spline and Bézier methods for curve and surface modeling, subdivision, terrain modeling, and wavelets. This book will prove useful to mathematicians, computer scientists, and advance mathematics students.
Download or read book Curves and Surfaces for CAGD written by Gerald E. Farin and published by Morgan Kaufmann. This book was released on 2002 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface -- Chapter 1 P. B̌ezier: How a Simple System Was Born -- Chapter 2 Introductory Material -- Chapter 3 Linear Interpolation -- Chapter 4 The de Casteljau Algorithm -- Chapter 5 The Bernstein Form of a B̌ezier Curve -- Chapter 6 B̌ezier Curve Topics -- Chapter 7 Polynomial Curve Constructions -- Chapter 8 B-Spline Curves -- Chapter 9 Constructing Spline Curves -- Chapter 10 W. Boehm: Differential Geometry I -- Chapter 11 Geometric Continuity -- Chapter 12 ConicSections -- Chapter 13 Rational B̌ezier and B-Spline Curves -- Chapter 14 Tensor Product Patches -- Chapter 15 Constructing Polynomial Patches -- Chapter 16 Composite Surfaces -- Chapter 17 B̌ezier Triangles -- Chapter 18 Practical Aspects of B̌ezier Triangles -- Chapter 19 W. Boehm: Differential Geometry II -- Chapter 20 GeometricContinuityforSurfaces -- Chapter 21 Surfaces with Arbitrary Topology -- Chapter 22 Coons Patches -- Chapter 23 Shape -- Chapter 24 Evaluation of Some Methods -- Appendix A Quick Reference of Curve ...
Download or read book Mathematical Methods in Computer Aided Geometric Design written by Tom Lyche and published by Academic Press. This book was released on 2014-05-10 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Methods in Computer Aided Geometric Design covers the proceedings of the 1988 International Conference by the same title, held at the University of Oslo, Norway. This text contains papers based on the survey lectures, along with 33 full-length research papers. This book is composed of 39 chapters and begins with surveys of scattered data interpolation, spline elastic manifolds, geometry processing, the properties of Bézier curves, and Gröbner basis methods for multivariate splines. The next chapters deal with the principles of box splines, smooth piecewise quadric surfaces, some applications of hierarchical segmentations of algebraic curves, nonlinear parameters of splines, and algebraic aspects of geometric continuity. These topics are followed by discussions of shape preserving representations, box-spline surfaces, subdivision algorithm parallelization, interpolation systems, and the finite element method. Other chapters explore the concept and applications of uniform bivariate hermite interpolation, an algorithm for smooth interpolation, and the three B-spline constructions. The concluding chapters consider the three B-spline constructions, design tools for shaping spline models, approximation of surfaces constrained by a differential equation, and a general subdivision theorem for Bézier triangles. This book will prove useful to mathematicians and advance mathematics students.
Download or read book Fundamentals of Computer Aided Geometric Design written by Josef Hoschek and published by A K Peters/CRC Press. This book was released on 1996-09-05 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic reference and text, this book introduces the foundations used to create an accurate computer screen image using mathematical tools. This comprehensive guide is a handbook for students and practitioners and includes an extensive bibliography for further study.
Download or read book Designing Fair Curves and Surfaces written by Nickolas S. Sapidis and published by SIAM. This book was released on 1994-01-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors define fairness mathematically, demonstrate how newly developed curve and surface schemes guarantee fairness, and assist the user in identifying and removing shape aberrations in a surface model without destroying the principal shape characteristics of the model. A valuable resource for engineers working in CAD, CAM, or computer-aided engineering.
Download or read book Fundamental Developments of Computer aided Geometric Modeling written by Les A. Piegl and published by . This book was released on 1993 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: N/AD BLURB Reviews recent developments in computer-aided geometric design and presents a state-of-the-art assessment of the area Includes chapters from top researchers in CAGD on key aspects of the field Features eight pages of color plates
Download or read book Applied Geometry for Computer Graphics and CAD written by Duncan Marsh and published by Springer. This book was released on 2006-03-30 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the manipulation and representation of geometrical objects, this book explores the application of geometry to computer graphics and computer-aided design (CAD). Over 300 exercises are included, some new to this edition, and many of which encourage the reader to implement the techniques and algorithms discussed through the use of a computer package with graphing and computer algebra capabilities. A dedicated website also offers further resources and useful links.
Download or read book Shape Interrogation for Computer Aided Design and Manufacturing written by Nicholas M. Patrikalakis and published by Springer Science & Business Media. This book was released on 2002-02-14 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape interrogation is the process of extraction of information from a geometric model. It is a fundamental component of Computer Aided Design and Manufacturing (CAD/CAM) systems. The authors focus on shape interrogation of geometric models bounded by free-form surfaces. Free-form surfaces, also called sculptured surfaces, are widely used in the bodies of ships, automobiles and aircraft, which have both functionality and attractive shape requirements. Many electronic devices as well as consumer products are designed with aesthetic shapes, which involve free-form surfaces. This book provides the mathematical fundamentals as well as algorithms for various shape interrogation methods including nonlinear polynomial solvers, intersection problems, differential geometry of intersection curves, distance functions, curve and surface interrogation, umbilics and lines of curvature, geodesics, and offset curves and surfaces. This book will be of interest both to graduate students and professionals.
Download or read book Designing Fair Curves and Surfaces written by Nickolas S. Sapidis and published by SIAM. This book was released on 1994-01-01 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art study of the techniques used for designing curves and surfaces for computer-aided design applications focuses on the principle that fair shapes are always free of unessential features and are simple in design. The authors define fairness mathematically, demonstrate how newly developed curve and surface schemes guarantee fairness, and assist the user in identifying and removing shape aberrations in a surface model without destroying the principal shape characteristics of the model. Aesthetic aspects of geometric modeling are of vital importance in industrial design and modeling, particularly in the automobile and aerospace industries. Any engineer working in computer-aided design, computer-aided manufacturing, or computer-aided engineering will want to add this volume to his or her library. Researchers who have a familiarity with basic techniques in computer-aided graphic design and some knowledge of differential geometry will find this book a helpful reference. It is essential reading for statisticians working on approximation or smoothing of data with mathematical curves or surfaces.
