Download or read book Geometric Challenges in Isogeometric Analysis written by Carla Manni and published by Springer Nature. This book was released on 2022-08-08 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected contributions presented at the INdAM Workshop "Geometric Challenges in Isogeometric Analysis", held in Rome, Italy on January 27-31, 2020. It gives an overview of the forefront research on splines and their efficient use in isogeometric methods for the discretization of differential problems over complex and trimmed geometries. A variety of research topics in this context are covered, including (i) high-quality spline surfaces on complex and trimmed geometries, (ii) construction and analysis of smooth spline spaces on unstructured meshes, (iii) numerical aspects and benchmarking of isogeometric discretizations on unstructured meshes, meshing strategies and software. Given its scope, the book will be of interest to both researchers and graduate students working in the areas of approximation theory, geometric design and numerical simulation. Chapter 10 is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Isogeometric Analysis written by J. Austin Cottrell and published by John Wiley & Sons. This book was released on 2009-08-11 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The authors are the originators of isogeometric analysis, are excellent scientists and good educators. It is very original. There is no other book on this topic.” —René de Borst, Eindhoven University of Technology Written by leading experts in the field and featuring fully integrated colour throughout, Isogeometric Analysis provides a groundbreaking solution for the integration of CAD and FEA technologies. Tom Hughes and his researchers, Austin Cottrell and Yuri Bazilevs, present their pioneering isogeometric approach, which aims to integrate the two techniques of CAD and FEA using precise NURBS geometry in the FEA application. This technology offers the potential to revolutionise automobile, ship and airplane design and analysis by allowing models to be designed, tested and adjusted in one integrative stage. Providing a systematic approach to the topic, the authors begin with a tutorial introducing the foundations of Isogeometric Analysis, before advancing to a comprehensive coverage of the most recent developments in the technique. The authors offer a clear explanation as to how to add isogeometric capabilities to existing finite element computer programs, demonstrating how to implement and use the technology. Detailed programming examples and datasets are included to impart a thorough knowledge and understanding of the material. Provides examples of different applications, showing the reader how to implement isogeometric models Addresses readers on both sides of the CAD/FEA divide Describes Non-Uniform Rational B-Splines (NURBS) basis functions

Download or read book IsoGeometric Analysis A New Paradigm in the Numerical Approximation of PDEs written by Annalisa Buffa and published by Springer. This book was released on 2016-10-05 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an introduction to isogeometric methods with a focus on their mathematical foundations, this book is composed of four chapters, each devoted to a topic of special interests for isogeometric methods and their theoretical understanding. It contains a tutorial on splines and generalizations that are used in CAD parametrizations, and gives an overview of geometric modeling techniques that can be used within the isogeometric approach, with a focus on non-tensor product splines. Finally, it presents the mathematical properties of isogeometric spaces and spline spaces for vector field approximations, and treats in detail an application of fundamental importance: the isogeometric simulation of a viscous incompressible flow. The contributions were written by Carla Manni and Hendrik Speelers, Vibeke Skytt and Tor Dokken, Lourenco Beirao da Veiga, Annalisa Buffa, Giancarlo Sangalli and Rafael Vazquez, and finally by John Evans and Thomas J.R. Hughes.

Download or read book Precursors of Isogeometric Analysis written by Christopher G. Provatidis and published by Springer. This book was released on 2019-01-01 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained book addresses the three most popular computational methods in CAE (finite elements, boundary elements, collocation methods) in a unified way, bridging the gap between CAD and CAE. It includes applications to a broad spectrum of engineering (benchmark) application problems, such as elasto-statics/dynamics and potential problems (thermal, acoustics, electrostatics). It also provides a large number of test cases, with full documentation of original sources, making it a valuable resource for any student or researcher in FEA-related areas. The book, which assumes readers have a basic knowledge of FEA, can be used as additional reading for engineering courses as well as for other interdepartmental MSc courses.

Download or read book Isogeometric Analysis and Applications 2018 written by Harald van Brummelen and published by Springer Nature. This book was released on 2021-01-13 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers a selection of outstanding research papers presented at the third Conference on Isogeometric Analysis and Applications, held in Delft, The Netherlands, in April 2018. This conference series, previously held in Linz, Austria, in 2012 and Annweiler am Trifels, Germany, in 2014, has created an international forum for interaction between scientists and practitioners working in this rapidly developing field. Isogeometric analysis is a groundbreaking computational approach that aims to bridge the gap between numerical analysis and computational geometry modeling by integrating the finite element method and related numerical simulation techniques into the computer-aided design workflow, and vice versa. The methodology has matured over the last decade both in terms of our theoretical understanding, its mathematical foundation and the robustness and efficiency of its practical implementations. This development has enabled scientists and practitioners to tackle challenging new applications at the frontiers of research in science and engineering and attracted early adopters for this his novel computer-aided design and engineering technology in industry. The IGAA 2018 conference brought together experts on isogeometric analysis theory and application, share their insights into challenging industrial applications and to discuss the latest developments as well as the directions of future research and development that are required to make isogeometric analysis an established mainstream technology.

Download or read book Mesh Generation and Adaptation written by Rubén Sevilla and published by Springer Nature. This book was released on 2022-05-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The developments in mesh generation are usually driven by the needs of new applications and/or novel algorithms. The last decade has seen a renewed interest in mesh generation and adaptation by the computational engineering community, due to the challenges introduced by complex industrial problems.Another common challenge is the need to handle complex geometries. Nowadays, it is becoming obvious that geometry should be persistent throughout the whole simulation process. Several methodologies that can carry the geometric information throughout the simulation stage are available, but due to the novelty of these methods, the generation of suitable meshes for these techniques is still the main obstacle for the industrial uptake of this technology.This book will cover different aspects of mesh generation and adaptation, with particular emphasis on cutting-edge mesh generation techniques for advanced discretisation methods and complex geometries.

Download or read book Geometric Modeling and Mesh Generation from Scanned Images written by Yongjie Jessica Zhang and published by CRC Press. This book was released on 2018-09-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-Edge Techniques to Better Analyze and Predict Complex Physical Phenomena Geometric Modeling and Mesh Generation from Scanned Images shows how to integrate image processing, geometric modeling, and mesh generation with the finite element method (FEM) to solve problems in computational biology, medicine, materials science, and engineering. Based on the author’s recent research and course at Carnegie Mellon University, the text explains the fundamentals of medical imaging, image processing, computational geometry, mesh generation, visualization, and finite element analysis. It also explores novel and advanced applications in computational biology, medicine, materials science, and other engineering areas. One of the first to cover this emerging interdisciplinary field, the book addresses biomedical/material imaging, image processing, geometric modeling and visualization, FEM, and biomedical and engineering applications. It introduces image-mesh-simulation pipelines, reviews numerical methods used in various modules of the pipelines, and discusses several scanning techniques, including ones to probe polycrystalline materials. The book next presents the fundamentals of geometric modeling and computer graphics, geometric objects and transformations, and curves and surfaces as well as two isocontouring methods: marching cubes and dual contouring. It then describes various triangular/tetrahedral and quadrilateral/hexahedral mesh generation techniques. The book also discusses volumetric T-spline modeling for isogeometric analysis (IGA) and introduces some new developments of FEM in recent years with applications.

Download or read book Computational Science ICCS 2023 written by Jiří Mikyška and published by Springer Nature. This book was released on 2023-06-30 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 14073-14077 constitutes the proceedings of the 23rd International Conference on Computational Science, ICCS 2023, held in Prague, Czech Republic, during July 3-5, 2023. The total of 188 full papers and 94 short papers presented in this book set were carefully reviewed and selected from 530 submissions. 54 full and 37 short papers were accepted to the main track; 134 full and 57 short papers were accepted to the workshops/thematic tracks. The theme for 2023, "Computation at the Cutting Edge of Science", highlights the role of Computational Science in assisting multidisciplinary research. This conference was a unique event focusing on recent developments in scalable scientific algorithms, advanced software tools; computational grids; advanced numerical methods; and novel application areas. These innovative novel models, algorithms, and tools drive new science through efficient application in physical systems, computational and systems biology, environmental systems, finance, and others.

Download or read book The Isogeometric Boundary Element Method written by Gernot Beer and published by Springer Nature. This book was released on 2019-09-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the introduction of isogeometric technology to the boundary element method (BEM) in order to establish an improved link between simulation and computer aided design (CAD) that does not require mesh generation. In the isogeometric BEM, non-uniform rational B-splines replace the Lagrange polynomials used in conventional BEM. This may seem a trivial exercise, but if implemented rigorously, it has profound implications for the programming, resulting in software that is extremely user friendly and efficient. The BEM is ideally suited for linking with CAD, as both rely on the definition of objects by boundary representation. The book shows how the isogeometric philosophy can be implemented and how its benefits can be maximised with a minimum of user effort. Using several examples, ranging from potential problems to elasticity, it demonstrates that the isogeometric approach results in a drastic reduction in the number of unknowns and an increase in the quality of the results. In some cases even exact solutions without refinement are possible. The book also presents a number of practical applications, demonstrating that the development is not only of academic interest. It then elegantly addresses heterogeneous and non-linear problems using isogeometric concepts, and tests them on several examples, including a severely non-linear problem in viscous flow. The book makes a significant contribution towards a seamless integration of CAD and simulation, which eliminates the need for tedious mesh generation and provides high-quality results with minimum user intervention and computing.

Download or read book Moving Boundary Problems in Multi physics Coupling Processes written by Leilei Chen and published by Frontiers Media SA. This book was released on 2023-07-19 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extended Finite Element and Meshfree Methods written by Timon Rabczuk and published by Academic Press. This book was released on 2019-11-13 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extended Finite Element and Meshfree Methods provides an overview of, and investigates, recent developments in extended finite elements with a focus on applications to material failure in statics and dynamics. This class of methods is ideally suited for applications, such as crack propagation, two-phase flow, fluid-structure-interaction, optimization and inverse analysis because they do not require any remeshing. These methods include the original extended finite element method, smoothed extended finite element method (XFEM), phantom node method, extended meshfree methods, numerical manifold method and extended isogeometric analysis. This book also addresses their implementation and provides small MATLAB codes on each sub-topic. Also discussed are the challenges and efficient algorithms for tracking the crack path which plays an important role for complex engineering applications. - Explains all the important theory behind XFEM and meshfree methods - Provides advice on how to implement XFEM for a range of practical purposes, along with helpful MATLAB codes - Draws on the latest research to explore new topics, such as the applications of XFEM to shell formulations, and extended meshfree and extended isogeometric methods - Introduces alternative modeling methods to help readers decide what is most appropriate for their work

Download or read book Mathematical Analysis of Continuum Mechanics and Industrial Applications II written by Patrick van Meurs and published by Springer. This book was released on 2017-11-16 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the sequel to the proceedings of the International Conference of Continuum Mechanics Focusing on Singularities (CoMFoS15), the proceedings of CoMFoS16 present further advances and new topics in mathematical theory and numerical simulations related to various aspects of continuum mechanics. These include fracture mechanics, shape optimization, modeling of earthquakes, material structure, interface dynamics and complex systems.. The authors are leading researchers with a profound knowledge of mathematical analysis from the fields of applied mathematics, physics, seismology, engineering, and industry. The book helps readers to understand how mathematical theory can be applied to various industrial problems, and conversely, how industrial problems lead to new mathematical challenges.

Download or read book Isogeometric Analysis and Applications 2014 written by Bert Jüttler and published by Springer. This book was released on 2015-12-21 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element method into conventional spline-based CAD design tools. It thus bridges the gap between numerical analysis and geometry, and moreover it allows to tackle new cutting edge applications at the frontiers of research in science and engineering. This proceedings volume contains a selection of outstanding research papers presented at the second International Workshop on Isogeometric Analysis and Applications, held at Annweiler, Germany, in April 2014.

Download or read book Frontiers in Computational Fluid Structure Interaction and Flow Simulation written by Tayfun E. Tezduyar and published by Springer Nature. This book was released on 2023-11-01 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid-structure interaction (FSI) and flow simulation are challenging research areas that bring solution and analysis to many classes of problems in science, engineering, and technology. Young investigators under the age of 40 are conducting much of the frontier research in these areas, some of which is highlighted in this volume. The first author of each chapter took the lead role in carrying out the research presented. Some of the topics explored include Direct flow simulation of objects represented by point clouds Computational investigation of leaflet flutter in thinner biological heart valve tissues High-fidelity simulation of hydrokinetic energy applications High-resolution isogeometric analysis of car and tire aerodynamics Computational analysis of air-blast-structure interaction Heart valve computational flow analysis with boundary layer and leaflet contact representation Computational thermal multi-phase flow for metal additive manufacturing This volume will be a valuable resource for early-career researchers and students — not only those interested in computational FSI and flow simulation, but also other fields of engineering and science, including fluid mechanics, solid mechanics, and computational mathematics – as it will provide them with inspiration and guidance for conducting their own successful research. It will also be of interest to senior researchers looking to learn more about successful research led by those under 40 and possibly offer collaboration to these researchers.

Download or read book New Challenges in Grid Generation and Adaptivity for Scientific Computing written by Simona Perotto and published by Springer. This book was released on 2015-04-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects selected contributions from the “Fourth Tetrahedron Workshop on Grid Generation for Numerical Computations”, which was held in Verbania, Italy in July 2013. The previous editions of this Workshop were hosted by the Weierstrass Institute in Berlin (2005), by INRIA Rocquencourt in Paris (2007), and by Swansea University (2010). This book covers different, though related, aspects of the field: the generation of quality grids for complex three-dimensional geometries; parallel mesh generation algorithms; mesh adaptation, including both theoretical and implementation aspects; grid generation and adaptation on surfaces – all with an interesting mix of numerical analysis, computer science and strongly application-oriented problems.

Download or read book Proceedings of the 1st International Conference on Numerical Modelling in Engineering written by Magd Abdel Wahab and published by Springer. This book was released on 2018-08-28 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers on numerical modeling in Mechanical Engineering (Volume 2) as part of the proceedings of the 1st International Conference on Numerical Modeling in Engineering (NME 2018), which was held in Ghent, Belgium. The overall objective of the conference was to bring together international scientists and engineers in academia and industry from fields related to advanced numerical techniques, such as the finite element method (FEM), boundary element method (BEM), isogeometric analysis (IGA), etc., and their applications to a wide range of engineering disciplines. This book addresses various industrial engineering applications of numerical simulations to Mechanical and Materials Engineering, including: Aerospace applications, Acoustic analysis, Biomechanical applications, Contact problems and wear, Heat transfer analysis, Vibration and dynamics, Transient analysis, Nonlinear analysis, Composite materials, Polymers, Metal alloys, Fracture mechanics, Fatigue of materials, Creep behavior, Phase transformation, and Crystal plasticity.

Download or read book Image Based Geometric Modeling and Mesh Generation written by Yongjie (Jessica) Zhang and published by Springer Science & Business Media. This book was released on 2012-07-03 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a new interdisciplinary research area, “image-based geometric modeling and mesh generation” integrates image processing, geometric modeling and mesh generation with finite element method (FEM) to solve problems in computational biomedicine, materials sciences and engineering. It is well known that FEM is currently well-developed and efficient, but mesh generation for complex geometries (e.g., the human body) still takes about 80% of the total analysis time and is the major obstacle to reduce the total computation time. It is mainly because none of the traditional approaches is sufficient to effectively construct finite element meshes for arbitrarily complicated domains, and generally a great deal of manual interaction is involved in mesh generation. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications.