Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-08-13 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.

Download or read book Slope Engineering written by Ali Ismet Kanlı and published by BoD – Books on Demand. This book was released on 2021-03-17 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of slope engineering encompasses slope stability analysis and design, movement monitoring, and slope safety management and maintenance. Engineers in this field are concerned with landslides and other gravity-stimulated mass movements. Their job is to frequently evaluate existing and proposed slopes to assess their stability. As such, this book provides information on remote sensing in landslide detection, tunnel face stability, stability analysis and maintenance of cut slopes, design techniques in rock and soil engineering, statistical models for landslide risk mapping, slope stability analysis in open-pit mines, ecological engineering for slope stabilization, and asphalt-stabilized strengthening in open-pit coal mining.

Download or read book Proceedings of the 5th International Conference on Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Engineering in the XXI Century Lessons learned and future challenges written by N.P. López-Acosta and published by IOS Press. This book was released on 2019-11-26 with total page 3006 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Pan-American Conference on Soil Mechanics and Geotechnical Engineering (PCSMGE) was held in Mexico in 1959. Every 4 years since then, PCSMGE has brought together the geotechnical engineering community from all over the world to discuss the problems, solutions and future challenges facing this engineering sector. Sixty years after the first conference, the 2019 edition returns to Mexico. This book, Geotechnical Engineering in the XXI Century: Lessons learned and future challenges, presents the proceedings of the XVI Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XVI PCSMGE), held in Cancun, Mexico, from 17 – 20 November 2019. Of the 393 full papers submitted, 335 were accepted for publication after peer review. They are included here organized into 19 technical sessions, and cover a wide range of themes related to geotechnical engineering in the 21st century. Topics covered include: laboratory and in-situ testing; analytical and physical modeling in geotechnics; numerical modeling in geotechnics; unsaturated soils; soft soils; foundations and retaining structures; excavations and tunnels; offshore geotechnics; transportation in geotechnics; natural hazards; embankments and tailings dams; soils dynamics and earthquake engineering; ground improvement; sustainability and geo-environment; preservation of historic sites; forensics engineering; rock mechanics; education; and energy geotechnics. Providing a state-of-the-art overview of research into innovative and challenging applications in the field, the book will be of interest to all those working in soil mechanics and geotechnical engineering. In this proceedings, 58% of the contributions are in English, and 42% of the contributions are in Spanish or Portuguese.

Download or read book Geotechnical Characterization and Modelling written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-09-18 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018, discussing issues and challenges relating to the characterization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike.

Download or read book Proceedings of Indian Geotechnical and Geoenvironmental Engineering Conference IGGEC 2021 Vol 1 written by Arvind Kumar Agnihotri and published by Springer Nature. This book was released on 2022-11-24 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the Indian Geotechnical and Geoenvironmental Engineering Conference (IGGEC-21). Various topics covered in this book include geotechnical engineering, earthquake geotechnical engineering, geoenvironmental engineering, ground improvement, transportation geotechnics, waste management and sustainable engineering. The book will be a valuable reference for researchers and professionals in the discipline of civil, materials, geoenvironmental engineering, landfills, hydrogeology, ground improvement and earthquake geotechnical engineering.

Download or read book Current Trends in Geotechnical Engineering and Construction written by Mahdi Karkush and published by Springer Nature. This book was released on 2022-10-28 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected articles from the third International Conference on Geotechnical Engineering-Iraq 2022 (3ICGE-2022) held on May 29–31, 2022, at the University of Baghdad/Baghdad/Iraq. This proceeding discusses the latest research and studies in geotechnical engineering and all related topics in different fields such as civil engineering, environmental engineering, and architectural engineering. This book gives participants from both academics and industry a great chance to learn about recent developments in Geotechnical engineering fields.

Download or read book Proceedings of GeoShanghai 2018 International Conference Ground Improvement and Geosynthetics written by Lin Li and published by Springer. This book was released on 2018-05-10 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the eighth volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This book, entitled Ground Improvement and Geosynthetics”, presents the latest information on the new technologies and practical applications in various geotechnical engineering projects and advancements on ground improvement and geosynethetics. This volume presents detailed design procedures and examples to demonstrate the applications of the latest ground improvement technologies and innovative geosynethetics in geotechnical engineering. Topics include pile/column technology as foundations, retaining structures, or embankment supports, physical and chemical technologies for soil stabilization and ground improvement, geosynthetic reinforcement for roads, slopes, retaining walls, and foundations. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.

Download or read book Geotechnical Reliability Analysis written by Jie Zhang and published by Springer Nature. This book was released on 2023-09-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook systematically introduces the theories, methods, and algorithms for geotechnical reliability analysis. There are a lot of illustrative examples in the textbook such that readers can easily grasp the concepts and theories related to geotechnical reliability analysis. A unique feature of the textbook is that computer codes are also provided through carefully designed examples such that the methods and the algorithms described in the textbook can be easily understood. In addition, the computer codes are flexible and can be conveniently extended to analyze different types of realistic problems with little additional efforts.

Download or read book Physical Modelling in Geotechnics Volume 2 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Download or read book 5th International Conference on Geofoam Blocks in Construction Applications written by David Arellano and published by Springer. This book was released on 2018-05-24 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the EPS 2018: 5th International Conference on Geofoam Blocks in Construction Applications, held in Kyrenia, Northern Cyprus on May 9 to 11, 2018, present a collection of contributions on the state-of-the-art of research and applications relating to geofoam. Geofoam researchers, consultants, molders, contractors and practitioners from all around the globe discuss the recent developments and future trends of expanded polystyrene (EPS)-block geofoam technology and its construction applications. EPS’18 contributes to the development of geofoam applications, following on from successful conferences in Oslo (1985), Tokyo (1996), Salt Lake City (2001) and Oslo (2011). The book discusses topics including, but not limited to, current use of geofoam, design specifications, applications, new concepts, material properties, modeling and specific topics in geofoam blocks in construction applications.

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-10-22 with total page 5946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Geotechnical Safety and Risk IV written by Limin Zhang and published by CRC Press. This book was released on 2013-11-15 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Safety and Risk IV contains the contributions presented at the 4th International Symposium on Geotechnical Safety and Risk (4th ISGSR, Hong Kong, 4-6 December 2013), which was organised under the auspices of the Geotechnical Safety Network (GEOSNet), TC304 on Engineering Practice of Risk Assessment and Management and TC205 on Safety an

Download or read book Twenty Sixth International Congress on Large Dams Vingt Sixi me Congr s International des Grands Barrages written by CIGB ICOLD and published by CRC Press. This book was released on 2018-06-27 with total page 4571 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Committee on Large Dams (ICOLD) held its 26th International Congress in Vienna, Austria (1-7 July 2018). The proceedings of the congress focus on four main questions: 1. Reservoir sedimentation and sustainable development; 2. Safety and risk analysis; 3. Geology and dams, and 4. Small dams and levees. The book thoroughly discusses these questions and is indispensable for academics, engineers and professionals involved or interested in engineering, hydraulic engineering and related disciplines.

Download or read book Soil Dynamics and Soil Structure Interaction for Resilient Infrastructure written by Tarek Abdoun and published by Springer. This book was released on 2017-07-11 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrastructure is the key to creating a sustainable community. It affects our future well-being as well as the economic climate. Indeed, the infrastructure we are building today will shape tomorrow's communities. GeoMEast 2017 created a venue for researchers and practitioners from all over the world to share their expertise to advance the role of innovative geotechnology in developing sustainable infrastructure. This volume focuses on the role of soil-structure-interaction and soil dynamics. It discusses case studies as well as physical and numerical models of geo-structures. It covers: Soil-Structure-Interaction under static and dynamic loads, dynamic behavior of soils, and soil liquefaction. It is hoped that this volume will contribute to further advance the state-of-the-art for the next generation infrastructure. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.

Download or read book Advanced Characterization and Testing of Textiles written by Patricia I. Dolez and published by Woodhead Publishing. This book was released on 2017-09-19 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Characterization and Testing of Textiles explores developments in physical and chemical testing and specific high-performance tests relating to textiles. The book introduces the principles of advanced characterization and testing, including the importance of performance-based specifications in the textiles industry. Chapters are organized by textile properties, providing in-depth coverage of each characteristic. Tests for specific applications are addressed, with the main focus on high-performance and technical textiles. - Focuses on advanced testing methods for technical and high-performance textiles, covering state-of-the-art technology in its field - Details specific textile properties and associated testing for each characteristic

Download or read book Ground Improvement and Earth Structures written by Mounir Bouassida and published by Springer. This book was released on 2017-07-11 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains research articles that cover a wide range of topics related to ground improvement and subsurface structures. Selected papers represent the state-of-the-art in the analysis and design of reinforced retaining walls, diaphragm walls and buried pipes. In addition, topics related to ground improvement using vacuum consolidation and deep mixing techniques are also included. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.