Download or read book Safety of Genetically Engineered Foods written by National Research Council and published by National Academies Press. This book was released on 2004-07-08 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assists policymakers in evaluating the appropriate scientific methods for detecting unintended changes in food and assessing the potential for adverse health effects from genetically modified products. In this book, the committee recommended that greater scrutiny should be given to foods containing new compounds or unusual amounts of naturally occurring substances, regardless of the method used to create them. The book offers a framework to guide federal agencies in selecting the route of safety assessment. It identifies and recommends several pre- and post-market approaches to guide the assessment of unintended compositional changes that could result from genetically modified foods and research avenues to fill the knowledge gaps.
Download or read book Plant Biotechnology written by Adrian Slater and published by OUP Oxford. This book was released on 2008-03-27 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Biotechnology presents a balanced, objective exploration of the technology behind genetic manipulation, and its application to the growth and cultivation of plants. The book describes the techniques underpinning genetic manipulation and makes extensive use of case studies to illustrate how this influential tool is used in practice.
Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book Genetic Modification of Plants written by Frank Kempken and published by Springer Science & Business Media. This book was released on 2009-12-15 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceived with the aim of sorting fact from fiction over genetically modified (GM) crops, this book brings together the knowledge of 30 specialists in the field of transgenic plants. It covers the generation and detection of these plants as well as the genetic traits conferred on transgenic plants. In addition, the book looks at a wide variety of crops, ornamental plants and tree species that are subject to genetic modifications, assessing the risks involved in genetic modification as well as the potential economic benefits of the technology in specific cases. The book’s structure, with fully cross-referenced chapters, gives readers a quick access to specific topics, whether that is comprehensive data on particular species of ornamentals, or coverage of the socioeconomic implications of GM technology. With an increasing demand for bioenergy, and the necessary higher yields relying on wider genetic variation, this book supplies all the technical details required to move forward to a new era in agriculture.
Download or read book Genetic Engineering of Plants written by National Research Council and published by National Academies Press. This book was released on 1984-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book...is, in fact, a short text on the many practical problems...associated with translating the explosion in basic biotechnological research into the next Green Revolution," explains Economic Botany. The book is "a concise and accurate narrative, that also manages to be interesting and personal...a splendid little book." Biotechnology states, "Because of the clarity with which it is written, this thin volume makes a major contribution to improving public understanding of genetic engineering's potential for enlarging the world's food supply...and can be profitably read by practically anyone interested in application of molecular biology to improvement of productivity in agriculture."
Download or read book Genetic Manipulation in Plant Breeding written by W. Horn and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-07-08 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: No detailed description available for "Genetic Manipulation in Plant Breeding".
Download or read book Seeds of Concern written by David Ronald Murray and published by UNSW Press. This book was released on 2003 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: How are genetically modified plants produced? Which breeding goals are worthwhile, and which are not? Can the escape of transferred genes be controlled? Why have the first transgenic plants been released without full appreciation of the consequences? How dangerous are bacterial proteins produced in plant foods? Is anyone monitoring the unexpected effects of gene transfer? Will genetically modified plants ever be acceptable to organic growers? These are some of the important questions canvassed in this book, written with the insight of an experienced Australian plant scientist and conservationist.
Download or read book Applications of Genetic Engineering to Crop Improvement written by G.B. Collins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions of plant genetics to the production of higher yielding crops of superior quality are well documented. These successes have been realized through the application of plant breeding techniques to a diverse array of genetically controlled traits. Such highly effective breeding procedures will continue to be the primary method employed for the development of new crop cultivars; however, new techniques in cell and molecular biology will provide additional approaches for genetic modification. There has been considerable speculation recently concerning the potential impact of new techniques in cell and molecular biology on plant improvement. These genetic engineering techniques should offer unique opportunities to alter the genetic makeup of crops if applied to existing breeding procedures. Many questions must be answered in order to identify specific applications of these new technologies. This search for applications will require input from plant scientists working on various aspects of crop improvement. This volume is intended to assess the interrelationships between conventional plant breeding and genetic engineering.
Download or read book Field Testing Genetically Modified Organisms written by National Research Council and published by National Academies Press. This book was released on 1989-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Potential benefits from the use of genetically modified organismsâ€"such as bacteria that biodegrade environmental pollutantsâ€"are enormous. To minimize the risks of releasing such organisms into the environment, regulators are working to develop rational safeguards. This volume provides a comprehensive examination of the issues surrounding testing these organisms in the laboratory or the field and a practical framework for making decisions about organism release. Beginning with a discussion of classical versus molecular techniques for genetic alteration, the volume is divided into major sections for plants and microorganisms and covers the characteristics of altered organisms, past experience with releases, and such specific issues as whether plant introductions could promote weediness. The executive summary presents major conclusions and outlines the recommended decision-making framework.
Download or read book Gene Manipulation in Plant Improvement written by J. Perry Gustafson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results obtained to date involving the use of in ~ methods to facilitate wide hybridization in plants are voluminous and impressive. The techniques of embryo culture, ovule culture, and in~ pollination and fertilization represent an extension of the normal sexual hybridization process. Successes recorded in obtaining hybrids stem largely from circumventing prezygotic or postzygotic hybridization barriers. Numerous recent successful hybridizations were possible because of the development of improved tissue and cell culture systems for crop plants and attention given to genotypes used in hybridization attempts. Interspecific and intergeneric hybridization utilizing the process of protoplast fusion will bypass the limits set by all sexual me'thods. In addition to combining complete genomes from two different species through protoplast fusion, this system affords unique opportunities for creating novel cytoplasmic combinations, transfer of individual chromosomes, transfer of cytoplasmic organelles, manipulation of male sterility, and for single gene transfer. Some caution must be noted with regard to the extent of hybridization possible between distantly related species. Although practically no limit exists to the physical fusion of protoplasts from widely divergent species, the restrictions imposed by somatic incompatibility have not been adequately addressed. Regeneration of plants from the protoplast or single heterokaryon level is still a major hurdle for many important crop species before somatic cell fusion can be exploited to produce interspecific and intergeneric hybrids. Identification and selection of hybrids is also a limitation to the efficient application of cell fusion methods.
Download or read book Gene Manipulation in Plant Improvement II written by J. Perry Gustafson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are clearly many directions in which the further development of the GUS gene fusion system can progress. Some of these have been outlined above, but others can be imagined. There are no reasons to limit our conceptions of the use of GUS gene fusions to analysis and manipulation of single genes. We can envision numerous marked genes - perhaps with several new fusion systems - giving valuable information about gene interaction, or population structure. The study of plan- pathogen and plant symbiont interactions can progress rapidly with simple quantitative markers for genes and individuals. We can imagine ways of using gene fusions to report on crop physiology or other complex phenotypes, thereby enhancing the accuracy and speed of screening. Introduction of the biosynthetic pathway for glucuronide detoxification by expressing genes for the UDP-glucuronyl transferases in plants may result in novel mechanisms for plants to deal with xenobiotics such as insecticides or herbicides. Synthesis of substrates, which until now has been performed chemicall- resulting in expensive compounds - can be done biosynthetically. This should make the system not only the most powerful gene fusion system for agriculture, but also the most accessible.
Download or read book Genetic Manipulation in Plant Breeding written by and published by . This book was released on 1986 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Methodology of Plant Genetic Manipulation Criteria for Decision Making written by Alan C. Cassells and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: A range of novel techniques is available to the plant breeder today to complement classical breeding methods. The new options are based on the integration of advances in plant cell biology with those in plant molecular biology. Plant cell, tissue and organ cultures provide efficient systems for transformation, for the achievement of wide crosses and for the production of variation through spontaneous and induced mutation, while permitting effective isolation of desired genotypes by in vitro selection. This book presents a critical appraisal of the methodologies of plant genetic manipulation for advanced undergraduates, postgraduates, researchers and plant breeders, and provides guidance on the choice of breeding options. The latter depends on the breeding system of the crop, the breeding objective and the tissue culture systems applicable to the target genotype(s).
Download or read book Genetically Modified Pest Protected Plants written by National Research Council and published by National Academies Press. This book was released on 2000-08-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the risks and benefits of crops that are genetically modified for pest resistance, the urgency of establishing an appropriate regulatory framework for these products, and the importance of public understanding of the issues. The committee critically reviews federal policies toward transgenic products, the 1986 coordinated framework among the key federal agencies in the field, and rules proposed by the Environmental Protection Agency for regulation of plant pesticides. This book provides detailed analyses of: Mechanisms and results of genetic engineering compared to conventional breeding for pest resistance. Review of scientific issues associated with transgenic pest-protected plants, such as allergenicity, impact on nontarget plants, evolution of the pest species, and other concerns. Overview of regulatory framework and its use of scientific information with suggestions for improvements.
Download or read book New Directions for Biosciences Research in Agriculture written by National Research Council and published by National Academies Press. This book was released on 1985-01-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by an integrated committee of plant and animal scientists, this review of newer molecular genetic techniques and traditional research methods is presented as a compilation of high-reward opportunities for agricultural research. Directed to the Agricultural Research Service and the agricultural research community at large, the volume discusses biosciences research in genetic engineering, animal science, plant science, and plant diseases and insect pests. An optimal climate for productive research is discussed.
Download or read book Genetic Engineering of Horticultural Crops written by Gyana Ranjan Rout and published by Academic Press. This book was released on 2018-01-08 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Horticultural Crops provides key insights into commercialized crops, their improved productivity, disease and pest resistance, and enhanced nutritional or medicinal benefits. It includes insights into key technologies, such as marker traits identification and genetic traits transfer for increased productivity, examining the latest transgenic advances in a variety of crops and providing foundational information that can be applied to new areas of study. As modern biotechnology has helped to increase crop productivity by introducing novel gene(s) with high quality disease resistance and increased drought tolerance, this is an ideal resource for researchers and industry professionals. Provides examples of current technologies and methodologies, addressing abiotic and biotic stresses, pest resistance and yield improvement Presents protocols on plant genetic engineering in a variety of wide-use crops Includes biosafety rule regulation of genetically modified crops in the USA and third world countries
Download or read book Biotechnology and Plant Breeding written by Aluízio Borém and published by Elsevier. This book was released on 2014-01-21 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biotechnology and Plant Breeding includes critical discussions of the newest and most important applications of biotechnology in plant breeding, covering key topics such as biometry applied to molecular analysis of genetic diversity, genetically modified plants, and more. This work goes beyond recombinant DNA technology to bring together key information and references on new biotech tools for cultivar development, such as double-haploids, molecular markers, and genome-wide selection, among others. It is increasingly challenging for plant breeders and agricultural systems to supply enough food, feed, fiber and biofuel for the global population. As plant breeding evolves and becomes increasingly sophisticated, a staggering volume of genetic data is now generated. Biotechnology and Plant Breeding helps researchers and students become familiar with how the vast amounts of genetic data are generated, stored, analyzed and applied. This practical resource integrates information about plant breeding into the context of modern science, and assists with training for plant breeders including those scientists who have a good understanding of molecular biology/biotechnology and need to learn the art and practice of plant breeding. Plant biologists, breeding technicians, agronomists, seed technologists, students, and any researcher interested in biotechnologies applied to plant breeding will find this work an essential tool and reference for the field. Presents in-depth but easy-to-understand coverage of topics, so plant breeders can readily comprehend them and apply them to their breeding programs Includes chapters that address the already developed and optimized biotechnologies for cultivar development, with real-world application for users Features contributions by authors with several years of experience in their areas of expertise
