Download or read book General and Localized Corrosion of Austenitic And Borated Stainless Steels in Simulated Concentrated Ground Waters written by L. L. Wong and published by . This book was released on 2004 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boron containing stainless steels are used in the nuclear industry for applications such as spent fuel storage, control rods and shielding. It was of interest to compare the corrosion resistance of three borated stainless steels with standard austenitic alloy materials such as type 304 and 316 stainless steels. Tests were conducted in three simulated concentrated ground waters at 90 C. Results show that the borated stainless were less resistant to corrosion than the witness austenitic materials. An acidic concentrated ground water was more aggressive than an alkaline concentrated ground water.
Download or read book Corrosion of Austenitic Stainless Steels written by H S Khatak and published by Woodhead Publishing. This book was released on 2002-10-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study covers all types of corrosion of austenitic stainless steel. It also covers methods for detecting corrosion and investigating corrosion-related failure, together with guidelines for improving corrosion protection of steels. Details all types of corrosion of austenitic stainless steel Covers methods for detecting corrosion and investigating corrosion-related failure Outlines guidelines for improving corrosion protection of steels
Download or read book Transportation Storage and Disposal of Radioactive Materials written by and published by . This book was released on 2004 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Stainless Steels by Water Boiler Reactors Fuels written by Harold M. Busey and published by . This book was released on 1964 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Localized Corrosion of Type 304 Stainless Steel in Simulated Swimming Pool Water written by Tiangan Lian and published by . This book was released on 1995 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Localized Corrosion written by Fumio Hine and published by . This book was released on 1988 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on Sea Water Corrosion of Stainless Steels Mechanisms and Experiences written by European Federation of Corrosion and published by Woodhead Publishing Limited. This book was released on 1996 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at a workshop in 1995 organised by SINTEF Corrosion and Surface Technology (Trondheim) in co-operation with the EFC Working Parties on Marine Corrosion and Microbial Corrosion. Particular attention was given to biofilms, their causes, effects and prevention, as well as to the behaviour in seawater of high alloyed austenitic stainless steels including 6Mo, and super duplex stainless steels.
Download or read book LOCALIZED CORROSION OF AUSTENITIC STAINLESS STEELEXPOSED TO MIXTURES OF PLUTONIUM OXIDE AND CHLORIDE SALTS written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory corrosion tests were conducted to investigate the corrosivity of moist plutonium oxide/chloride (PuO2/Cl- ) salt mixtures on 304L and 316L stainless steel coupons. The tests exposed flat coupons for pitting evaluation and 'teardrop' stressed coupons for stress corrosion cracking (SCC) evaluation at room temperature to various mixtures of PuO2 and chloride-bearing salts for periods up to 500 days. The two flat coupons were placed so that the solid oxide/salt mixture contacted about one half of the coupon surface. One teardrop coupon was placed in contact with solid mixture; the second teardrop was in contact with the headspace gas only. The mixtures were loaded with nominally 0.5 wt % water under a helium atmosphere. Observations of corrosion ranged from superficial staining to pitting and SCC. The extent of corrosion depended on the total salt concentration and on the composition of the salt. The most significant corrosion was found in coupons that were exposed to 98 wt % PuO2, 2 wt % chloride salt mixtures that contained calcium chloride. SCC was observed in two 304L stainless steel teardrop coupons exposed in solid contact to a mixture of 98 wt % PuO2, 0.9 wt % NaCl, 0.9 wt % KCl, and 0.2 wt % CaCl2. The cracking was associated with the heat-affected zone of an autogenous weld that ran across the center of the coupon. Cracking was not observed in coupons exposed to the headspace gas, nor in coupons exposed to other mixtures with either 0.92 wt% CaCl2 or no CaCl2. The corrosion results point to the significance of the interaction between water loading and the concentration of the hydrating salt CaCl2 in the susceptibility of austenitic stainless steels to corrosion.
Download or read book The Resistance of Austenitic Stainless Steels to Pitting Corrosion in Simulated BFS OPC Pore Waters Containing Thiosulphate Ions written by A. J. Betts and published by . This book was released on 1989 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinetics of Localized Corrosion of Austenitic Stainless Steels written by Emily Powers and published by . This book was released on 1986 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Stainless Steels written by A. John Sedriks and published by John Wiley & Sons. This book was released on 1996-04-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete, Up-to-Date Introduction to Corrosion of StainlessSteels and Metallurgical Factors This fully updated Second Editionof Corrosion of Stainless Steels covers the tremendous advancesmade with stainless steels in recent decades, includingapplications in many new areas--from marine technologies andoff-shore oil production to power plants and the kitchen sink. Thisbook offers unique insights into the corrosion mechanisms affectingstainless steels, details problem-avoidance strategies, and helpsidentify corrosion-resistant capabilities for these remarkablealloys Sponsored by the Electrochemical Society, Corrosion osStainless Steels * Provides a comprehensive introduction to the selection,development, and production of all types of stainless steels * Emphasizes how metallurgical factors affect corrosionresistance * Examines the limitations of stainless steels within the contextof a discussion on higher alloys * Takes an interdisciplinary approach that demonstrates thecombined effects of metallurgy, chemistry, and electrochemistry oncorrosion resistance * Provides baseline knowledge and testing standards for stainlesssteels, and facilitates failure analysis for industrial purposes orlitigation related to equipment failure This is a much-needed text for materials scientists, chemicalengineers, corrosion specialists, graduate students, and anyone whoneeds to be brought up to date on this subject.
Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Mechanisms in Theory and Practice written by Philippe Marcus and published by CRC Press. This book was released on 2002-07-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Called "a useful contribution to the current litereture on corrosion science, engineering, and technology" by Corrosion Review, this book offers real-world applications and problem-solving techniques to reduce the occurrence of pits, cracks, and deterioration in industrial, automotive, marine, and electronic structures. It details the electrochemic
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Steels written by D. T. Llewellyn and published by Elsevier. This book was released on 2013-10-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels: Metallurgy and Applications deals with the metallurgy and applications of steel and covers the broad spectrum of the mainstream commercial grades as well as the service or manufacturing requirements that govern their use. Standard specifications and some of the design considerations that provide satisfactory service performance are considered. Brief reference is also made to some of the steel prices that were effective on January 1, 1991. Comprised of five chapters, this book begins with an overview of technological trends in the steelmaking industry since 1980s, paying particular attention to energy conservation, iron-making, continuous casting, and product requirements. The next chapter is devoted to low-carbon strip steels and their cold-forming behavior, applications, and metallurgical factors affecting cold formability. The third chapter focuses on low-carbon structural steels and their strengthening mechanisms, while the fourth chapter considers engineering steels and their heat treatment aspects. The final chapter describes stainless steels and their composition-structure relationships, commercial grades, corrosion resistance, welding, and cold working. The mechanical properties of stainless steels at elevated and sub-zero temperatures are also examined. This monograph will be of interest to students and practicing metallurgists.
