Download or read book Dynamic Analysis and Control System Design of Automatic Transmissions written by Joel M Maguire and published by SAE International. This book was released on 2013-02-12 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the basic working principle and the mechanical construction of automatic transmissions has not changed significantly, increased requirements for performance, fuel economy, and drivability, as well as the increasing number of gears has made it more challenging to design the systems that control modern automatic transmissions. New types of transmissions—continuously variable transmissions (CVT), dual clutch transmissions (DCT), and hybrid powertrains—have presented added challenges. Gear shifting in today’s automatic transmissions is a dynamic process that involves synchronized torque transfer from one clutch to another, smooth engine speed change, engine torque management, and minimization of output torque disturbance. Dynamic analysis helps to understand gear shifting mechanics and supports creation of the best design for gear shift control systems in passenger cars, trucks, buses, and commercial vehicles. Based on the authors’ graduate-level teaching material, this well-illustrated book relays how the fundamental principles of hydraulics and control systems are applied to today’s automatic transmissions. It opens with coverage of basic automatic transmission mechanics and then details dynamics and controls associated with modern automatic transmissions. Topics covered include: gear shifting mechanics and controls, dynamic models of planetary automatic transmissions, design of hydraulic control systems, learning algorithms for achieving consistent shift quality, torque converter clutch controls, centrifugal pendulum vibration absorbers, friction launch controls, shift scheduling and integrated powertrain controls, continuously variable transmission ratio controls, dual-clutch transmission controls, and more. The book includes many equations and clearly explained examples. Sample Simulink models of various transmission mechanical, hydraulic and control subsystems are also provided. Chapter Two, which covers planetary gear automatic transmissions, includes homework questions, making it ideal for classroom use. In addition to students, new engineers will find the book helpful because it provides the basics of transmission dynamics and control. More experienced engineers will appreciate the theoretical discussions that will help elevate the reader’s knowledge. Although many automatic transmission-related books have been published, most focus on mechanical construction, operation principles, and control hardware. None tie the dynamic analysis, control system design, and analytic investigation of the mechanical, hydraulic, and electronic controls as does this book.

Download or read book Gear Drive Systems written by Peter Lynwander and published by CRC Press. This book was released on 2019-01-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outstanding reference provides the complete range of practical and theoretical information - with over 250 detailed illustartions, fugures and table- needed to design, manufacture and operate reliable, efficient gear drive systems, emphasizing parallel shaft and planetary units with spur and helical gearing.

Download or read book Gearing Transmissions and Mechanical Systems written by Daizhong Su and published by . This book was released on 2000-07-26 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 90 papers cover gears, gearboxes, and geared systems; mechanisms, couplings, and linkages; mechanical transmissions including continuous variable transmission, belt drives, chain drives, and other transmissions; tribology, mechanical systems such as robots, hydraulic systems, and machinery; virtual reality; Internet-based technology; system integration; artificial intelligence; and advanced computer- aided design, manufacturing, engineering. Each has been reviewed by at least three peers. Among the topics are the terminology and classification of facial toothed joints and gearings, a web-based agile system for designing rolling bearings, the control of vibration characteristics of a metal pushing belt-planetary gear continuously variable transmission, optimizing pumping units performances with fiberglass sucker rod strings, and research on architecture for autonomous interface agents. There is no subject index. Distributed in the US by ASME. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Automotive Power Transmission Systems written by Yi Zhang and published by John Wiley & Sons. This book was released on 2018-07-18 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides technical details and developments for all automotive power transmission systems The transmission system of an automotive vehicle is the key to the dynamic performance, drivability and comfort, and fuel economy. Modern advanced transmission systems are the combination of mechanical, electrical and electronic subsystems. The development of transmission products requires the synergy of multi-disciplinary expertise in mechanical engineering, electrical engineering, and electronic and software engineering. Automotive Power Transmission Systems comprehensively covers various types of power transmission systems of ground vehicles, including conventional automobiles driven by internal combustion engines, and electric and hybrid vehicles. The book covers the technical aspects of design, analysis and control for manual transmissions, automatic transmission, CVTs, dual clutch transmissions, electric drives, and hybrid power systems. It not only presents the technical details of key transmission components, but also covers the system integration for dynamic analysis and control. Key features: Covers conventional automobiles as well as electric and hybrid vehicles. Covers aspects of design, analysis and control. Includes the most recent developments in the field of automotive power transmission systems. The book is essential reading for researchers and practitioners in automotive, mechanical and electrical engineering.

Download or read book Theory and Practice of Gearing and Transmissions written by Veniamin Goldfarb and published by Springer. This book was released on 2015-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing. Furthermore, this volume honours the work of Faydor L. Litvin on the 100th anniversary of this birth. He is acknowledged as the founder of the modern theory of gearing. An exhaustive list of his contributions and achievements and a biography are included.

Download or read book Design of Mechanical Power Transmissions written by Carl F. Zorowski and published by Createspace Independent Publishing Platform. This book was released on 2016-10-06 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Mechanical Power Transmissions addresses the classic problem of the need for an intermediate device between a mechanical power source and driven load that converts the motor output torque and speed to the torque and speed needs of the load. The content emphasizes the mathematical modeling and design performance analysis of the more commonly available fixed and variable ratio mechanical transmissions. A special feature of this monograph is that in every analytic development the solution process begins with the application of fundamental engineering principles to appropriate physical models. All presentations include a combination of text explanation of the solution development together with illustrations of the symbolic mathematical process. The goal is to provide an understanding of the basic theory and models that are appropriate to the engineering application of the relevant subject matter in a succinct manner. The knowledge content covered includes: Chapter 1: definitions of force, torque, work and power: relation between torque, speed and power. Chapter 2: rolling contact, involute gear tooth geometry, diametral pitch, gear ratios, simple and compound gear trains. Chapter 3: planetary gear system analysis, general gear ratio relationships, classic gear ratio outputs, interpretation. Chapter 4: example applications, manual mechanical hoist, variable high gear ratio hybrid planetary. Chapter 5: fixed ratio transmission performance, effect of input/output rotation on reaction torque, energy loss inclusion. Chapter 6: variable speed ratio transmissions, fluid coupling, torque converter, strengths and weaknesses. Chapter 7: transmission selection, variable speed power output and load, start up time. This monograph is not intended to be a textbook or comprehensive reference source. Its purpose is to assist the once acquainted reader in recalling relevant knowledge content or to provide concise complimentary assistance to those acquiring the knowledge for the first time in a structured learning environment.

Download or read book Advanced Gear Engineering written by Veniamin Goldfarb and published by Springer. This book was released on 2017-07-10 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent developments in practically all spheres of mechanical engineering related to different kinds of gears and transmissions. Topics treated range from fundamental research to the advanced applications of gears in various practical fields, prospects of manufacturing development, results and trends of numerical and experimental research of gears, new approaches to gear design and aspects of their optimization synthesis.

Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book New Approaches to Gear Design and Production written by Veniamin Goldfarb and published by Springer Nature. This book was released on 2020-01-25 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.

Download or read book Gears in Design Production and Education written by Natalya Barmina and published by Springer Nature. This book was released on 2021-05-31 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fourth volume in the series devoted to gear engineering and computer-aided design, production, testing and education. It comprises fundamental and applied research contributions by scientists and gear experts from all the world and covers recent developments and historical achievements in various spheres of mechanical engineering related to different kinds of gears, transmissions, and drive systems. It gathers contributions describing the advanced approaches to research, design, testing and production of practically all common and new kinds of gears for a vast number of advanced applications. Special attention is paid to issues of higher education in the field of gears. The book is intended as a tribute to professor Veniamin Goldfarb (1941-2019), one of the world-known leaders in the field of gear research, education and production, who contributed much to the active international cooperation of gear experts and to promotion of MMS science. The introductory chapter of this book relates his research to major developments in the field of mechanisms and machine science and outlines important contributions that he made within the period of 1964-2019.

Download or read book Dynamics of Mechanical Systems written by Harold Josephs and published by CRC Press. This book was released on 2002-06-19 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical systems are becoming increasingly sophisticated and continually require greater precision, improved reliability, and extended life. To meet the demand for advanced mechanisms and systems, present and future engineers must understand not only the fundamental mechanical components, but also the principles of vibrations, stability, and bala

Download or read book Automotive Power Transmission Systems written by Yi Zhang and published by John Wiley & Sons. This book was released on 2018-10-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides technical details and developments for all automotive power transmission systems The transmission system of an automotive vehicle is the key to the dynamic performance, drivability and comfort, and fuel economy. Modern advanced transmission systems are the combination of mechanical, electrical and electronic subsystems. The development of transmission products requires the synergy of multi-disciplinary expertise in mechanical engineering, electrical engineering, and electronic and software engineering. Automotive Power Transmission Systems comprehensively covers various types of power transmission systems of ground vehicles, including conventional automobiles driven by internal combustion engines, and electric and hybrid vehicles. The book covers the technical aspects of design, analysis and control for manual transmissions, automatic transmission, CVTs, dual clutch transmissions, electric drives, and hybrid power systems. It not only presents the technical details of key transmission components, but also covers the system integration for dynamic analysis and control. Key features: Covers conventional automobiles as well as electric and hybrid vehicles. Covers aspects of design, analysis and control. Includes the most recent developments in the field of automotive power transmission systems. The book is essential reading for researchers and practitioners in automotive, mechanical and electrical engineering.

Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions.

Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-01-24 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as: straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. Includes fully-developed exercises to draw the reader's attention to the problems that are of interest to the designer, as well as to clarify the calculation procedure Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears

Download or read book Proceedings of the 2nd International Conference on Mechanical System Dynamics written by Xiaoting Rui and published by Springer Nature. This book was released on with total page 4383 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gears and Gear Drives written by Damir T. Jelaska and published by John Wiley & Sons. This book was released on 2012-08-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding how gears are formed and how they interact or ‘mesh’ with each other is essential when designing equipment that uses gears or gear trains. The way in which gear teeth are formed and how they mesh is determined by their geometry and kinematics, which is the topic of this book. Gears and Gear Drives provides the reader with comprehensive coverage of gears and gear drives. Spur, helical, bevel, worm and planetary gears are all covered, with consideration given to their classification, geometry, kinematics, accuracy control, load capacity and manufacturing. Cylindrical gear geometry is the basis for dealing with any gear drives, so this is covered in detail. Key features: Contains hundreds of 2D and 3D figures to illustrate all types of gears and gear drives, including planetary and worm gears Includes fundamental derivations and explanations of formulae Enables the reader to know how to carry out accuracy control and load capacity checks for any gear drive Includes directions for the practical design of gears and gear drives Covers DIN and ISO standards in the area Gears and Gear Drives is a comprehensive reference for gears and gear drive professionals and graduate students in mechanical engineering departments and covers everything important to know how to design, control and manufacture gear drives.

Download or read book Gear Drive Systems written by Peter Lynwander and published by CRC Press. This book was released on 1983-06-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents practical gearbox design and application information to individuals responsible for the specification and operation of mechanical systems incorporating gear drives. It focuses on parallel shaft and planetary units using spur and helical gearing.