Download or read book GB T 6949 2010 Translated English of Chinese Standard GBT 6949 2010 GB T6949 2010 GBT6949 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-03-20 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the instruments and equipment, reagents, coal sample preparation, determination procedures, results calculation, and degree of precision for determination of apparent relative density of coal. This Standard applies to lignite, bituminous coal and anthracite.
Download or read book GB T 5313 2010 Translated English of Chinese Standard GBT 5313 2010 GB T5313 2010 GBT5313 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-05-22 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the through-thickness characteristic grades, test methods and inspection rules of steel plates. The through-thickness characteristic grade is a measurement for the lamellar-tearing resistance of steel plates, and the through-thickness characteristics may be assessed according to the reduction of area in through-thickness tensile test.
Download or read book GB T 25978 2010 Translated English of Chinese Standard GBT 25978 2010 GB T25978 2010 GBT25978 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-17 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the definition, performance requirements and test methods of plates and labels used on road vehicles for the descriptions of vehicle information.
Download or read book GB T 20564 4 2010 Translated English of Chinese Standard GBT 20564 4 2010 GB T20564 4 2010 GBT20564 4 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-10-14 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, sample preparation, test for physical properties of covers, penetration analysis determination method for inside liners of tyres, test for physical properties of inner tubes and test for physical properties of flaps for test methods for measuring physical properties of pneumatic tyres (covers, inner tubes and flaps).
Download or read book GB T 11263 2010 Translated English of Chinese Standard GBT 11263 2010 GB T11263 2010 GBT11263 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-02-24 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the ordering content, classification, code, dimensions, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of hot-rolled H section steel and T section steel cut by hot-rolled H section steel.
Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3870 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book GB T 26058 2010 Translated English of Chinese Standard GBT 26058 2010 GB T26058 2010 GBT26058 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-11-28 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies requirements, test methods, inspection rules and marks, packaging, transport, storage, quality certificate and contract (or order sheet) content for extruded tube of titanium and titanium alloys. This Standard is applicable to titanium and titanium alloy seamless tubes produced by extrusion for various purposes.
Download or read book GB T 9969 2008 Translated English of Chinese Standard GB T9969 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-11-05 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the basic requirements and preparation methods of instructions for use of industrial products. This standard applies to the preparation methods of instructions for use of industrial products for non-consumer products. This standard can also be applied to other forms of instructions for use.
Download or read book GB T 9115 2010 English translated version written by Codeofchina and published by https://www.codeofchina.com. This book was released on 2011-10-01 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 9115-2010 Code of Bills of Quantities and Valuation for Construction Works English-translated version
Download or read book GB T 2015 2017 Translated English of Chinese Standard GBT 2015 2017 GB T2015 2017 GBT2015 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms, definitions, components, materials, grading, code, technical requirements, test methods, inspection rules, packaging, mark, transportation and storage of white Portland cement. This Standard is applicable to the production and application of white Portland cement.
Download or read book GB T 228 1 2010 Translated English of Chinese Standard GBT 228 1 2010 GB T228 1 2010 GBT228 1 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-11-13 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 228 specifies the principle, definition, symbols, explanation, test piece and dimensional measurement, testing equipment, testing requirements, performance determination, the numerical rounding of determination results and testing report of the method for tensile testing of metallic materials.
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2777 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book GB T 50561 2010 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1.0.1 This code is formulated with a view to guiding the equipment installing and acceptance of Chinese building material industry, ensuring the quality and safety of equipment installation, promoting the technological progress and standardization process, as well as improving economic benefits. 1.0.2 This code is applicable to the equipment installing and acceptance of predecomposition production line in cement industry, float glass production line and building sanitary ceramics production line from foundation acceptance to equipment no-load test run in newly-built, reconstructed and expanded projects. 1.0.3 The installing and acceptance of continuous conveying equipment, fan and pump equipment as well as crane in cement plant, flat glass plant and building sanitary ceramics plant which are not involved in this code, shall be in accordance with the relevant requirements of the current national standards "Code for Construction and Acceptance of Continuous Conveyer Equipment Installation Engineering" (GB 50270), "Code for Construction and Acceptance of Computer, Fan and Pump Installation Engineering" (GB 50275) and "Code for Construction and Acceptance of Crane Installation Engineering" (GB 50278) respectively. The installing and acceptance of other equipment not involved shall be in accordance with the relevant requirements of the current national standard "General Code for Construction and Acceptance of Mechanical Equipment Installation Engineering" (GB 50231).The installing and acceptance of mechanical equipment with specific requirements and beyond this code shall be in accordance with the relevant requirements of random documents. 1.0.4 The installing and acceptance of electric system and control system for equipment shall be in accordance with the relevant requirements of the current professional standard "Specification for Construction Quality Checkout and Evaluation of Electric equipment" (DL/T 5161.1-17). If there is any special requirement, the installing and acceptance shall be in accordance with the relevant requirements of the random documents of equipment. 1.0.5 The refractory material for building relevant kilns in cement plant, flat glass plant and building sanitary ceramics plant shall not only meet the special requirements in the text of this code, but also comply with the requirements of the current national standard "Code for Construction and Acceptance of Industrial Furnaces Building" (GB 50211). The refractory material with special requirements and new designations shall meet the requirements of product specification. 1.0.6 The installing shall not only meet the requirements of this code, but also comply with the relevant national requirements of safety technology, labor protection, fire prevention and cleaner production. The power utilization of mechanical equipment under installation shall meet the current safety standards and codes for power supply and utilization at construction site. 1.0.7 The wastes generated during installation shall be stored and disposed collectively. The toxic or potential toxic wastes shall be treated according to the requirements of the current national standard "Standard for Pollution Control on Hazardous Waste Storage" (GB 18597), and the treatment processes and results shall be reported to the relevant national administrative departments in written form. 1.0.8 This code specifies the basic technical requirements for the equipment installing and acceptance of building material industry. If this code conflicts with the requirements of the national laws and administrative regulations, the national laws and administrative regulations shall apply. 1.0.9 The equipment installing and acceptance of building material industry shall not only meet the requirements of this code, but also comply with those specified in the current relevant national standards.
Download or read book GB T 11060 1 2010 English translated version written by Codeofchina.com and published by www.codeofchina.com. This book was released on 2010-12-01 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 11060.1-2010 Plain bearings - Thin-walled half bearings with or without flange - Tolerances design features and methods of test English-translated version
Download or read book YB T 4212 2010 Translated English of Chinese Standard YBT 4212 2010 YB T4212 2010 YBT4212 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-11-28 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, order content, dimensions, shape, weight and allowable deviations, technical requirements, test methods, inspection rules, packaging, markings and quality certificates of hot-rolled wide flat steel for structural use. This standard is applicable to strip-shaped wide flat steel which has a thickness of 4 mm ~ 40 mm, a width of 150 mm ~ 600 mm, in a rectangular cross-section for structural use, hot-rolled on all four sides.
Download or read book GB GBT GB T Chinese Standard English translated version Catalog001 written by Dr. Meng Yongye CODEOFCHINA and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3955 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book GB T 25119 2010 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements of service, design, manufacture, and testing of electronic equipment, as well as basic hardware and software requirements considered necessary for durable and reliable equipment. Additional requirements in other standards or specifications may complement this Standard, if applicable. List of subclauses of this Standard in which agreement between the parties is mentioned is detailed in Appendix B. This Standard applies to all electronic equipment for control, regulation, protection, supply, etc. installed on rail vehicles (including subway and urban rail vehicle).The equipment may be powered by the batteries or generators of vehicles or powered by a low-voltage power supply with or without a direct connection to the contact system (transformer, voltage divider and auxiliary power supply).For the purposes of this Standard, electronic equipment is defined as equipment mainly composed of semiconductor devices and recognized associated components. These components will mainly be mounted on printed boards. Note: sensors (current, voltage, speed, etc.) and firing unit printed board for power electronic equipment are covered by this Standard. Complete firing units are covered by GB/T 25122.1. This Standard is not applicable to the power electronic equipment in the main circuits and auxiliary circuits.