Download or read book GB T 37521 3 2019 Translated English of Chinese Standard GBT 37521 3 2019 GB T37521 3 2019 GBT37521 3 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-08-31 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 37521 specifies the basic requirements, flow, procedures and methods, preparation, implementation, and disposal of explosive devices for security check for anti-explosives at key place. This Part applies to the process of security check for anti-explosives at key place.

Download or read book GB T 37521 1 2019 Translated English of Chinese Standard GBT 37521 1 2019 GB T37521 1 2019 GBT37521 1 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-08-31 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 37521 specifies the basic requirements for the implementation of security check for anti-explosives at key place and the requirements such as scheme, agency, personnel, equipment and facilities, and equipping for security check for anti-explosives. This Part applies to the security check for anti-explosives at key place. It may also be used for reference when other places need to be subjected to security check for anti-explosives.

Download or read book GB T 21255 2019 Translated English of Chinese Standard GBT 21255 2019 GB T21255 2019 GBT21255 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-11-06 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 20671 specifies the principle, instruments and apparatuses, test samples, test procedures, test reports and precision of the method for determining the degree of influence on the physical properties of nonmetallic gasket materials after immersion in the test liquid. This Part applies to the determination of the liquid resistance of Type 1, Type 2, Type 3 and Type 7 materials which are described in GB/T 20671.1-2020.

Download or read book GB T 33610 3 2019 Translated English of Chinese Standard GBT 33610 3 2019 GB T33610 3 2019 GBT33610 3 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-09-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 33610 specifies the method for determining the deodorization performance of textiles by gas chromatograph. This part applies to the determination of indole, isovaleric acid and 2-nonenal in various textile products.

Download or read book GB T 3654 3 2019 Translated English of Chinese Standard GBT 3654 3 2019 GB T3654 3 2019 GBT3654 3 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-08-31 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 3654 stipulates the determination of silicon content in ferroniobium through gravimetric method. This Part is applicable to the determination of silicon content in ferroniobium; the range of determination (mass fraction): 1.00% ~ 10.00%.

Download or read book GB T 19941 3 2019 Translated English of Chinese Standard GBT 19941 3 2019 GB T19941 3 2019 GBT19941 3 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-01-10 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19941 specifies high performance liquid chromatography (HPLC) method for the determination of formaldehyde emission in leather and fur. This Part is applicable to determination of formaldehyde emission in various leathers, furs and their products.

Download or read book GB T 37503 2019 Translated English of Chinese Standard GBT 37503 2019 GB T37503 2019 GBT37503 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-01-04 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the types, service quality requirements and service quality evaluation of logistics public information platform. This Standard is applicable to the service and evaluation of logistics public information platform.

Download or read book GB T 8721 2019 Translated English of Chinese Standard GBT 8721 2019 GB T8721 2019 GBT8721 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-09-14 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the determination principle, instruments and apparatuses, samples, test steps and result calculation for tensile strength of carbon materials. This Standard applies to the determination of tensile strength of carbon materials at room temperature.

Download or read book GB T 16596 2019 Translated English of Chinese Standard GBT 16596 2019 GB T16596 2019 GBT16596 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-08-17 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies procedures for using rectangular coordinates and polar coordinates to establish the front, back, and three-dimensional wafer coordinate systems. This Standard applies to the establishment of wafer coordinate systems with and without pattern. The coordinate system is used to determine and record the exact locations of test results such as defects and particles on the wafer.

Download or read book GB T 37335 2019 Translated English of Chinese Standard GBT 37335 2019 GB T37335 2019 GBT37335 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the design bases, design contents and methods, design requirements and design check of structural full penetration weld of self-elevating drilling units. This Standard is applicable to the design of structural full penetration weld of self-elevating drilling units. The design of structural full penetration weld of other types of self-elevating units may also refer to this Standard.

Download or read book GB T 37781 2019 Translated English of Chinese Standard GBT 37781 2019 GB T37781 2019 GBT37781 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-02 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, principle, tests, and test report of the tests for bending strength of glass. The three-point bending method in this Standard applies to the test for bending strength of brittle materials such as glass.

Download or read book GB T 37470 2019 Translated English of Chinese Standard GBT 37470 2019 GB T37470 2019 GBT37470 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-30 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the definition, classification, requirements, test methods, inspection rules, product marking, package, transportation, storage and safety measures for the structural 3D code anti-counterfeiting technology products. This Standard is applicable to the anti-counterfeiting technology products with structural 3D code.

Download or read book GB T 38191 2019 Translated English of Chinese Standard GBT 38191 2019 GB T38191 2019 GBT38191 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-01-20 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard stipulates the structural features, technical requirements and test methods of nickel alloy self-lubricated bearing material. This Standard is applicable to nickel alloy self-lubricated bearing material.

Download or read book GB T 8826 2019 Translated English of Chinese Standard GBT 8826 2019 GB T8826 2019 GBT8826 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-05-02 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, technical requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of rubber antioxidant - polymerized 2,2,4-trimethyl-1,2-dihydroquinoline (hereinafter referred to as rubber antioxidant TMQ).

Download or read book GB T 37682 2019 Translated English of Chinese Standard GBT 37682 2019 GB T37682 2019 GBT37682 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-08-31 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the ordering requirements, manufacturing process, technical requirements, inspection rules and test methods, acceptance and quality certification, identification and packaging of large exposed gear steel castings. This Standard applies to the ordering, manufacture, and inspection of large gear steel castings in the form of exposed drive, which are cast using the sand mold.

Download or read book GB T 37598 2019 Translated English of Chinese Standard GBT 37598 2019 GB T37598 2019 GBT37598 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-09-14 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies to use blue fracture test method to inspect macro nonmetallic inclusions in steel, including sample preparation, inspection method, inspection result and inspection report. This Standard is applicable to inspect macro non-metallic inclusions in steel, of which length is not less than 1mm, width is not less than 0.1mm.

Download or read book GB T 16266 2019 Translated English of Chinese Standard GBT 16266 2019 GB T16266 2019 GBT16266 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-16 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard stipulates contact corrosion test method of packaging materials against the contacted metallic surface. It includes test environment conditions, reagents, test materials, instruments and equipment, samples, test procedures and test report. This Standard is applicable to contact corrosion test of packaging materials against steel and aluminum. The contact corrosion test against the surface of other metallic materials may take this as a reference.