Download or read book GB T 28046 1 2011 Translated English of Chinese Standard GBT 28046 1 2011 GB T28046 1 2011 GBT28046 1 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location of systems/components on/in the vehicle.

Download or read book GB T 28046 2 2011 Translated English of Chinese Standard GBT 28046 2 2011 GB T28046 2 2011 GBT28046 2 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-05-20 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part describes the potential environmental loads, and specifies tests and requirements for the specific mounting location on/in the road vehicle. This Part applies to electrical and electronic systems/components for road vehicles. NOTE: Electrical loads are independent from the mounting location, but may vary due to the electrical resistance in the vehicle wiring harness and connection system.

Download or read book GB T 28046 3 2011 Translated English of Chinese Standard GBT 28046 3 2011 GB T28046 3 2011 GBT28046 3 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-10-05 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part describes the potential mechanical environmental stresses, and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.

Download or read book GB T 28046 4 2011 Translated English of Chinese Standard GBT 28046 4 2011 GB T28046 4 2011 GBT28046 4 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-08-02 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part describes the potential climatic environmental stresses and specifies tests and requirements recommended for the systems/components at the specific mounting location on/in the vehicle. This Part applies to electric and electronic systems/components for road vehicles.

Download or read book GB T 28046 2 2019 Translated English of Chinese Standard GBT 28046 2 2019 GB T28046 2 2019 GBT28046 2 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-01-20 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 28046 describes the electrical environmental loads of electrical and electronic equipment on the vehicles and specifies the tests and requirements. This Part applies to type M, N, O automotive electrical and electronic systems/components. Type L vehicle systems/components may refer to it.

Download or read book GB T 28046 5 2013 Translated English of Chinese Standard GBT 28046 5 2013 GB T28046 5 2013 GBT28046 5 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-06-18 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 28046 describes the chemical loads that may be encountered by systems/components installed at specific locations on/in the vehicle; and specifies the test and requirements. This Part is applicable to the automotive electrical and electronic systems/components. This Part is not applicable to the electrical and electronic systems/components that are continuously exposed to chemical reagents.

Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3871 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book GB GB T GBT Chinese Standard English translated version Catalog003 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3290 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.

Download or read book GB 150 1 2011 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1.1 This standard specifies the construction requirements of metal pressure vessels (hereinafter referred to as "Vessels"). This standard specifies the general requirements for the materials, design, fabrication, inspection and testing, and acceptance of metal pressure vessels (hereinafter referred to as “Vessels”). 1.2 Applicable design pressure of this Standard 1.2.1 For steel vessels, the design pressure shall not exceed 35MPa; 1.2.2 For vessels made of other metal materials, the applicable design pressure shall be determined according to the corresponding reference standards. 1.3 Applicable design temperature range of this Standard 1.3.1 Design temperature range: -269℃~900℃. 1.3.2 For steel vessels, the design temperature shall not exceed the allowable operating temperature range of the materials listed in GB 150.2 1.3.3 For vessels made of other metal materials, the design temperature shall be determined according to the allowable operating temperature of the materials listed in the corresponding reference standards of this Part. 1.4 Applicable structure forms of this Standard 1.4.1 The structure forms of the steel vessels to which this Standard is applicable shall be in accordance with the corresponding provisions of this Part and GB 150.2 ~ GB 150.4. 1.4.2 As for the vessels with specific structures and the vessels made of aluminum, titanium, copper, nickel and nickel alloy, as well as zirconium to which this Standard is applicable, the structure forms and applicable scope shall meet the corresponding requirements of the following standards: a) GB 151 Tubular Heat Exchangers; b) GB 12337 Steel Spherical Tanks; c) JB/T 4731 Steel Horizontal Vessels on Saddle Support; d) JB/T 4710 Steel Vertical Vessels Supported by Skirt; e) JB/T 4734 Aluminim Welded Vessels; f) JB/T 4745 Titanium Welded Vessels; g) JB/T 4755 Copper Pressure Vessels; h) JB/T 4756 Nickel and Nickel Alloy Pressure Vessels; i) NB/T 47011 Zirconium Pressure Vessels. 1.5 The following vessels are not within the applicable scope of this Standard: a) Vessels with design pressure lower than 0.1MPa and vacuum degree lower than 0.02MPa; b) Vessels under "Supervision Regulation on Safety Technology for Transportable Pressure Vessel"; c) Among equipment, the pressure chambers (such as pump casing, outer casing of compressors, outer casing of turbines, hydraulic cylinders etc.) which can be its own system or as components in swiveling or reciprocating movement machinery; d) Vessels subject to the neutron radiation damage failure risk in nuclear power plants. e) Vessels heated by direct flame; f) Vessels with inner diameter (for non-circular sections, refers to the maximum geometric dimensions of the inner boundaries of the sections, such as: diagonals of rectangles and major axes of ellipses) less than 150mm; g) Enamelled vessels and the vessels with other national standards or professional standards in the refrigeration and air conditioning industry. 1.6 Vessels scope 1.6.1 Connection between the vessel and the external pipe: a) The groove end face of the first pass of girth joints with welded connection; b) The first threaded connector end surface of screwed joint; c) The sealing surface of the first flange with flanged connection; d) The first sealing surface of special connecting piece or pipe fittings connection. 1.6.2 Bearing headers, flat covers and their fasteners of connection pipe, manhole and handhole, etc. 1.6.3 Attachment welds between non-pressure components and pressure components. 1.6.4 Non-pressure components such as support and skirt directly connected to the vessels. 1.6.5 Excessive pressure relief device of vessel (see Appendix B).

Download or read book GB T 1 1 2009 Translated English of Chinese Standard GBT 1 1 2009 GB T1 1 2009 GBT1 1 2009 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-05-16 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 1 specifies the standard structure, drafting expression rules, layout format; gives the relevant expression style. This part applies to the preparation of national standards, industry standards and local standards, as well as national standardization guidance technical documents. The preparation of other standards can refer to it for use.

Download or read book GB T 26837 2011 Translated English of Chinese Standard GBT 26837 2011 GB T26837 2011 GBT26837 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of stationary type and movable type industrial X-ray radiographic equipment. This standard applies to stationary type and movable type industrial X-ray radiographic equipment which has a tube-voltage not exceeding 500 kV.

Download or read book GB T 10609 1 2008 Translated English of Chinese Standard GBT 10609 1 2008 GB T10609 1 2008 GBT10609 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-02 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 10609 specifies the basic requirements, content, size, format of the title blocks in the technical drawings. This part applies to the title blocks in the technical drawings.

Download or read book GB T 26704 2011 Translated English of Chinese Standard GBT 26704 2011 GB T26704 2011 GBT26704 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-02-09 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, requirements, test method, inspection rule and signs, packaging, transportation, and storage of pencils. This Standard applies to graphite pencils and colored pencils. This Standard does not apply to water-soluble colored pencils and specialpurpose pencils.

Download or read book GB T 9074 1 2018 Translated English of Chinese Standard GBT 9074 1 2018 GB T9074 1 2018 GBT9074 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-05-18 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 9074 specifies the type size, technical conditions and marks for bolt or screw and washer assemblies with plain washers. This Part applies to bolt or screw and washer assemblies with plain washers of which the thread specifications are M2~M12, there is a flat bearing surface, the performance levels of bolt or screw are levels 8.8, 9.8 and 10.9, the hardness level of plain washer is 200 HV or 300 HV.

Download or read book GB T 879 1 2018 Translated English of Chinese Standard GBT 879 1 2018 GB T879 1 2018 GBT879 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-01-04 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 879 specifies type sizes, applications, technical specifications and markings for straight slotted, heavy-duty spring-type straight pins. This Part is applicable to spring-type straight pins of which the nominal diameter is d1 = 1mm~50mm, the material is steel, austenitic and martensitic stainless steel, with straight groove and withstanding heavy load.

Download or read book GB T 2015 2017 Translated English of Chinese Standard GBT 2015 2017 GB T2015 2017 GBT2015 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms, definitions, components, materials, grading, code, technical requirements, test methods, inspection rules, packaging, mark, transportation and storage of white Portland cement. This Standard is applicable to the production and application of white Portland cement.