Download or read book GB T 2670 2 2017 Translated English of Chinese Standard GBT 2670 2 2017 GB T2670 2 2017 GBT2670 2 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-09-02 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2670 specifies the type and dimension, technical conditions, and marking of hexalobular socket countersunk head tapping screws. This Part is applicable to the hexalobular socket countersunk head tapping screws with Thread Specification of ST 2.9 ~ ST 6.3, Product Grade A.
Download or read book GB T 35270 2017 Translated English of Chinese Standard GBT 35270 2017 GB T35270 2017 GBT35270 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-20 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the requirements, inspection methods, instructions for use, inspection rules, as well as the technical features such as packaging, transportation and storage of baby carriers. This standard is applicable to the carrier products which are used for baby (aged for 4 months and above) whose head has a certain upright support force and can be attached vertically to the trunk of an adult body.
Download or read book GB T 2 2016 Translated English of Chinese Standard GBT 2 2016 GB T2 2016 GBT2 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-07-09 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the form and dimensions of ends of parts with external metric screw thread (e.g. bolt, screw and stud ends) recommended for use. This Standard applies to standardized or non-standardized threaded parts.
Download or read book GB T 1171 2017 Translated English of Chinese Standard GBT 1171 2017 GB T1171 2017 GBT1171 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-07-21 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the structure, types and marks, requirements, sampling, test methods and marking, labeling, packaging, transportation and storage of classical V-belts (hereinafter referred to as V-belts) for general drive. This Standard applies to classical V-belts used for general mechanical drive devices. This Standard does not apply to mechanical drive devices such as automobiles and motorcycles.
Download or read book GB T 34014 2017 Translated English of Chinese Standard GBT 34014 2017 GB T34014 2017 GBT34014 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-10-14 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the objects, composition of code structures, representation method for code structures and data carriers of coding of automotive traction battery. This Standard applies to automotive traction batteries, super capacitors and other rechargeable energy storage devices.
Download or read book GB T 5014 2017 Translated English of Chinese Standard GBT 5014 2017 GB T5014 2017 GBT5014 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-05 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the types, basic parameters, main dimensions, marking method, technical requirements and inspection rules of the LX type and LXZ type elastic pin coupling. This Standard is applicable to the driving shaft system connecting the two coaxial lines with transmission nominal torque of 250N-m ~ 1800N-m at working temperature of - 20 ~ +70 Celsius, and has the function of compensating the relative displacement of the two axes and buffering the axes.
Download or read book GB T 4942 2 1993 Translated English of Chinese Standard GBT 4942 2 1993 GB T4942 2 1993 GBT4942 2 1993 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-06-11 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements in classification, grading, marking, definition, testing method, and requalification of enclosure protection degree of low-voltage electrical apparatus (hereinafter referred as to electric apparatus).
Download or read book GB T 6653 2017 Translated English of Chinese Standard GBT 6653 2017 GB T6653 2017 GBT6653 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-06-02 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the dimension, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, package, mark and quality certificate of steel plates and strips for welded gas cylinders. This Standard is applicable to the hot-rolled steel plates and strips with thickness of 2.0mm~14.0mm, and cold-rolled steel plates and strips with thickness of 1.5mm~4.0mm used for the welded gas cylinder.
Download or read book GB T 21296 2 2020 Translated English of Chinese Standard GBT 21296 2 2020 GB T21296 2 2020 GBT21296 2 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-03-20 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 21296 specifies the terms and definitions, type and specification, metrological requirements, technical requirements, production and installation requirements, installation conditions and maintenance requirements, system function and data requirements, test methods, inspection rules, marking, packaging, transportation and storage of full-draught automatic instrument for weighing road vehicles in motion (hereinafter referred to as full-draught WIM).
Download or read book GB T 17799 1 2017 Translated English of Chinese Standard GB T 17799 1 2017 GBT17799 1 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-12-15 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electromagnetic compatibility (EMC) immunity requirements specified in this Part of GB/T 17799 are applicable to electrical and electronic equipment used in residential, commercial and light industrial environments, covering the immunity requirements in the frequency range of 0 Hz~400 GHz. Frequency bands not specified in this Part do not need to be measured. If there are no relevant specific product or product type EMC immunity standards, the general EMC immunity standards in this Part apply. This Part applies to equipment directly connected to the low-voltage public mains network or to a dedicated DC power supply powered by a low-voltage public mains network. This Part also applies to battery-powered equipment or equipment powered by non-public, non-industrial low-voltage distribution systems that are to be used in the locations described below. The environments included in this Part are indoor and outdoor environments in residential, commercial and light industrial premises. The descriptions of some site environments are listed below, including (but not limited to): - Residential place, such as: residence, apartment, etc.; - Retail outlets, such as stores, supermarkets, etc.; - Commercial buildings, such as offices, banks, etc.; - Public entertainment areas, such as: cinemas, public bars, dance halls, etc.; - Outdoor places, such as gas stations, parking lots, playgrounds and sports centers, etc.; - Light industrial places, such as workshops, laboratories, maintenance centers, etc. Any place that receives low-voltage power supply directly from the public mains network belongs to residential, commercial and light industrial environments. GB/T 17799.1-2017 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery. Page 6 of 14 The purpose of this Part is to specify the immunity test requirements for continuous and transient conducted and radiated disturbances, including electrostatic discharge, for equipment within the applicable scope. This Part specifies immuni...
Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.
Download or read book GB T 1097 2003 Translated English of Chinese Standard GBT 1097 2003 GB T1097 2003 GBT1097 2003 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-03-08 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the square and rectangular keys with width of b=8mm~45mm.
Download or read book GB T 67 2016 Translated English of Chinese Standard GBT 67 2016 GB T67 2016 GBT67 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-17 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the type and dimension, technical conditions and markings of slotted pan head screws.
Download or read book GB T 10088 2018 Translated English of Chinese Standard GBT 10088 2018 GB T10088 2018 GBT10088 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-11-16 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the module and diameter of cylindrical worm. This Standard applies to worms of cylindrical worm gears.
Download or read book GB T 14092 2 2023 Translated English of Chinese Standard GB T 14092 2 2023 GBT14092 2 2023 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-12-01 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the environmental parameters and severity levels of machinery products in the environmental condition of cold. This document applies to machinery products used in the environmental condition of cold. The environmental condition stipulated in this document include the environmental parameters and severity levels that the products are subject to and affected by. Applicable items and levels are selected for various types of products in accordance with the degree of environmental impact that they are subject to.
Download or read book GB T 21117 2007 Translated English of Chinese Standard GBT 21117 2007 GB T21117 2007 GBT21117 2007 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-03-17 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: GBT 21117-2007 specifies the magnetostrictive level meter - product classification, basic parameters, technical requirements, test methods, inspection rules, signs, instructions, packaging, storage and transport. This Standard applies to the magnetostrictive.
Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3870 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
