Download or read book GB T 19233 2020 Translated English of Chinese Standard GBT 19233 2020 GB T19233 2020 GBT19233 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-08-02 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard stipulates the test and calculation method that uses the carbon balance method to calculate fuel consumption, and the inspection and determination method of production conformity through the determination of automobile carbon dioxide (CO2), carbon monoxide (CO) and hydrocarbon (HC) emissions.

Download or read book GB T 3103 3 2020 Translated English of Chinese Standard GBT 3103 3 2020 GB T3103 3 2020 GBT3103 3 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 3103 specifies the tolerances of plain washers of which the nominal diameter is 1mm~150mm, the product grades are A, C and F, are used for combined connection of bolts, screws, studs and nuts. This Part is applicable to non-combined and combined plain washers, standard and non-standard plain washers.

Download or read book GB T 4423 2020 Translated English of Chinese Standard GBT 4423 2020 GB T4423 2020 GBT4423 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-12-20 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies classification and marking, technical requirements, test methods, inspection rules, marks, packaging, transportation, storage and quality certificate, purchase order (or contract) content for copper and copper alloy cold-drawn rod and bar. This Standard is applicable to general purpose round, rectangular, square and regular hexagonal copper and copper alloy cold-drawn rod and bar.

Download or read book GB T 32 3 2020 Translated English of Chinese Standard GBT 32 3 2020 GB T32 3 2020 GBT32 3 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-02-08 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 32 specifies the types and dimensions, technical conditions and reference standards, and designation of hexagon bolts with wire holes on head of fine pitch thread. This Part is applicable to hexagon bolts with wire holes on head, of nominal thread diameter of d = 8 mm ~ 48 mm, fine pitch thread, property grades of 5.6, 8.8, 10.9, A2-70, A4-70, A2-50, A4-50, CU2, CU3 and AL4, products grades of A and B.

Download or read book GB T 15330 2020 Translated English of Chinese Standard GBT 15330 2020 GB T15330 2020 GBT15330 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-02-08 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies test principle, instruments and equipment, preparation of test piece, test steps and result calculation for water penetration rate of pressure-sensitive tape. This Standard includes test methods for water penetration rate on vertical direction and on cross section direction of pressure-sensitive tape. The test method for water penetration rate on vertical direction of pressure-sensitive tape is applicable to single-sided or double-sided pressure-sensitive tape. The test method for water penetration rate on cross section direction of pressure sensitive tape is applicable to double-sided pressure-sensitive tape.

Download or read book GB T 5193 2020 Translated English of Chinese Standard GBT 5193 2020 GB T5193 2020 GBT5193 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-07-13 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the principle, test conditions, instruments and equipment, samples, contrast test blocks, test procedures, evaluation of test results, test records and reports for ultrasonic inspection for titanium and titanium alloy products. This Standard is applicable to the ultrasonic inspection for titanium and titanium alloy products of which the cross-section thickness is 6mm~500mm. The titanium and titanium alloy products of other specifications may refer to this Standard for implementation.

Download or read book GB T 5243 2020 Translated English of Chinese Standard GBT 5243 2020 GB T5243 2020 GBT5243 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements for marking, packaging, transportation and storage of cemented carbide products. This Standard is applicable to the cemented carbide products.

Download or read book GB T 8813 2020 Translated English of Chinese Standard GBT 8813 2020 GB T8813 2020 GBT8813 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-11-28 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies methods for determining the following parameters: a) Compressive strength and relative deformation; or b) Compressive stress at 10% relative deformation; and c) Compression modulus of rigid cellular plastics, if needed.

Download or read book GB T 15331 2020 Translated English of Chinese Standard GBT 15331 2020 GB T15331 2020 GBT15331 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-02-08 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies test principle, instruments and equipment, preparation of test piece, test steps and result calculation for water vapor transmission rate of pressure-sensitive tapes. This Standard includes test methods for vertical water vapor transmission rate and section water vapor transmission rate. The test method for vertical water vapor transmission rate is applicable to single-sided or double-sided pressure sensitive tape. The test method for section water vapor transmission rate is applicable to double-sided pressure-sensitive tape.

Download or read book GB T 799 2020 Translated English of Chinese Standard GBT 799 2020 GB T799 2020 GBT799 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-05-22 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the type dimensions, technical conditions, reference standards and marking of foundation bolts. This Standard applies to foundation bolts, of which is thread specification is M8 ~ M72, the performance grades are 4.6 and 5.6, and the product grade is C.

Download or read book GB T 39603 2020 Translated English of Chinese Standard GBT 39603 2020 GB T39603 2020 GBT39603 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-04-04 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard provides guidance and suggestions for carrying out the evaluation of the recall effectiveness of detective motor vehicle products, as well as information of the basic procedure of the recall effectiveness evaluation, the recall effectiveness evaluation model, the recall effectiveness evaluation process and the disposal of the evaluation results.

Download or read book GB T 39733 2020 Translated English of Chinese Standard GBT 39733 2020 GB T39733 2020 GBT39733 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-01-24 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the classification, technical requirements, inspection methods, acceptance rules, transportation and quality certificates of recycling iron-steel materials. This document applies to recycling iron-steel materials used as ferrite charge raw materials in ironmaking, steelmaking, casting and ferroalloy smelting.

Download or read book GB T 9263 2020 Translated English of Chinese Standard GBT 9263 2020 GB T9263 2020 GBT9263 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-05-22 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the test method of testing the slip resistance of anti-skid coatings by using friction coefficient test device. This Standard is applicable to the slip resistance test of a single coating or composite coating system of anti-skid coatings in the laboratory. Field test may also take this Standard as a reference.

Download or read book GB T 39364 2020 Translated English of Chinese Standard GBT 39364 2020 GB T39364 2020 GBT39364 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-05-02 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the location where laboratory samples are cut from a single (sheet) of leather, and the method for marking the cut laboratory samples. This Standard applies to the sampling of leather which is processed from various mammalian animal skins. This Standard does not apply to the sampling of leather which is processed from bird, fish and reptile skins.

Download or read book GB T 38893 2020 Translated English of Chinese Standard GBT 38893 2020 GB T38893 2020 GBT38893 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-08-13 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the composition, content, requirements, inspection methods and inspection items of the safety monitoring system for industrial truck. This standard applies to counterbalanced forklifts, reach forklifts, side forklifts, leg forklifts, pallet stackers, three-way stacker forklifts. Other types of industrial trucks may use it as a reference.

Download or read book GB T 1731 2020 Translated English of Chinese Standard GBT 1731 2020 GB T1731 2020 GBT1731 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-02-20 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the determination of flexibility of coating and putty films by a flexibility tester. Use the smallest spindle diameter that does not cause damage to the coating and putty films to represent the flexibility of the coating and putty films. This Standard applies to the determination of flexibility of coating and putty films.

Download or read book GB T 7996 2020 Translated English of Chinese Standard GBT 7996 2020 GB T7996 2020 GBT7996 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-05-22 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the nominal capacity and diameter of glass-lined equipment. This Standard applies to glass-lined equipment.