Download or read book GASFLOW MPI A Scalable Computational Fluid Dynamics Code for Gases Aerosols and Combustion Band 2 Users Manual Revision 1 0 written by Xiao, Jianjun and published by KIT Scientific Publishing. This book was released on 2016-04-06 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Karlsruhe Institute of Technology (KIT) is developing the parallel computational fluid dynamics code GASFLOW-MPI as a best-estimate tool for predicting transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containments and other facility buildings. GASFLOW-MPI is a finite-volume code based on proven computational fluid dynamics methodology that solves the compressible Navier-Stokes equations for three-dimensional volumes in Cartesian or cylindrical coordinates.
Download or read book GASFLOW MPI A Scalable Computational Fluid Dynamics Code for Gases Aerosols and Combustion Band 1 Theory and Computational Model Revision 1 0 written by Xiao, Jianjun and published by KIT Scientific Publishing. This book was released on 2016-04-06 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Karlsruhe Institute of Technology (KIT) is developing the parallel computational fluid dynamics code GASFLOW-MPI as a best-estimate tool for predicting transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containments and other facility buildings. GASFLOW-MPI is a finite-volume code based on proven computational fluid dynamics methodology that solves the compressible Navier-Stokes equations for three-dimensional volumes in Cartesian or cylindrical coordinates.
Download or read book GASFLOW MPI A Scalable Computational Fluid Dynamics Code for Gases Aerosols and Combustion Band 1 Theory and Computational Model Revision 1 0 und Band 2 Users Manual KIT Scientific Reports 7710 und 7711 written by Jianjun Xiao and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prevention of Hazardous Fires and Explosions written by V.E. Zarko and published by Springer Science & Business Media. This book was released on 1999-05-31 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Novosibirsk, Russia, May 12-15, 1998
Download or read book Combustion Flames and Explosions of Gases written by Bernard Lewis and published by Academic Press. This book was released on 2013-10-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion, Flames, and Explosions of Gases, Second Edition focuses on the processes, methodologies, and reactions involved in combustion phenomena. The publication first offers information on theoretical foundations, reaction between hydrogen and oxygen, and reaction between carbon monoxide and oxygen. Discussions focus on the fundamentals of reaction kinetics, elementary and complex reactions in gases, thermal reaction, and combined hydrogen-carbon monoxide-oxygen reaction. The text then elaborates on the reaction between hydrocarbons and oxygen and combustion waves in laminar flow. The manuscript tackles combustion waves in turbulent flow and air entrainment and burning of jets of fuel gases. Topics include effect of turbulence spectrum and turbulent wrinkling on combustion wave propagation; ignition of high-velocity streams by hot solid bodies; burners with primary air entrainment; and description of jet flames. The book then takes a look at detonation waves in gases; emission spectra, ionization, and electric-field effects in flames; and methods of flame photography and pressure recording. The publication is a valuable reference for readers interested in combustion phenomena.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cleaner Combustion written by Frédérique Battin-Leclerc and published by Springer Science & Business Media. This book was released on 2013-09-06 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.
Download or read book Training Guidelines in Non destructive Testing Techniques written by International Atomic Energy Agency and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nano and Bio Based Technologies for Wastewater Treatment written by Elvis Fosso-Kankeu and published by John Wiley & Sons. This book was released on 2019-05-21 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents recent challenges related to new forms of pollution from industries and discusses adequate state-of-the-art technologies capable to remediate such forms of pollution. Over the past few decades the boom in the industrial sector has contributed to the release in the environment of pollutants that have no regulatory status and which may have significant impact on the health of humans and animals. These pollutants also referred to as "emerging pollutants", are mostly aromatic compounds which derive from excretion of pharmaceutical, industrial effluents and municipal discharge. It is recurrent these days to find water treatment plants which no longer produce water that fits the purpose of domestic consumption based on newly established guidelines. This situation has prompted water authorities and researchers to develop tools for proper prediction and control of the dispersion of pollutants in the environment to ensure that appropriate measures are taken to prevent the occurrence of outbreaks due to sudden load of these pollutants in the water system. The chapters in this book cover a wide range of nano and bio-based techniques that have been designed for the real time detection of emerging contaminants in environmental water sources, geochemical models that are continuously improved for the prediction of inorganic contaminants migration from the mine solid wastes into ground and surface waters. Remediation strategies are also discussed and include effective techniques based on nanotechnology, advanced membrane filtration, oxidative and bio-degradation processes using various types of nanocatalysts, biocatalysts or supporting polymer matrices which are under advanced investigations for their implementation at large scale for the removal of recalcitrant pollutants from polluted water. Nano and Bio-Based Technologies for Wastewater Treatment: Prediction and Control Tools for the Dispersion of Pollutants in the Environment is divided is two sections. The first section covers the occurrence of emerging pollutants in environmental water while the second section covers state-of-the-art research on the removal of emerging pollutants from water using sustainable technologies. A total of 13 chapters addressing various topics related to the two sections are essentially based on recent developments in the respective field which could have a significant impact on the enhancement of the performance of wastewater treatment plants around the world, and especially in developing countries where access to clean and safe water remains a daily challenge.
Download or read book Climate Change and Island and Coastal Vulnerability written by J. Sundaresan and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Climate Change and Island and Coastal Vulnerability” is the outcome of a selection of peer reviewed edited papers presented at the International Workshop on Climate Change and Island Vulnerability (IWCCI) held at Kadmat Island, Lakshadweep, India in October 2010. Marine and coastal biodiversity, sea level rise vulnerability, fisheries, climate change impact on livelihood options, water and sanitation in island ecosystem and mitigation, adaptation and governance are the focal themes. The basic concept conveyed in the book is that biodiversity of islands is to be protected as a natural mechanism to mitigate climate change. Probability recurrence of mass coral bleaching and the management of coral reefs and their future protection are discussed in this book. Marine productivity and climate change for the last ten thousand years in the Arabian Sea have been examined with core records. Green technology is suggested as an important tool for mitigation and adaptation programmes in climate change. Measures taken to project biomass utilisation of islands as an energy source is delineated. Climate change may pose a potential threat on human health. Improved sanitation packages and models that are cost effective and environment-friendly for islands are uniquely presented in this book.
Download or read book Advanced Direct Injection Combustion Engine Technologies and Development written by H Zhao and published by Elsevier. This book was released on 2014-01-23 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel economy, but ongoing research challenges remain in improving the technology for commercial applications. As fuel prices escalate DI engines are expected to gain in popularity for automotive applications. This important book, in two volumes, reviews the science and technology of different types of DI combustion engines and their fuels. Volume 1 deals with direct injection gasoline and CNG engines, including history and essential principles, approaches to improved fuel economy, design, optimisation, optical techniques and their applications. - Reviews key technologies for enhancing direct injection (DI) gasoline engines - Examines approaches to improved fuel economy and lower emissions - Discusses DI compressed natural gas (CNG) engines and biofuels
Download or read book The Theory of Laser Materials Processing written by John Dowden and published by . This book was released on 2017 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Breakdown Spectroscopy written by Sergio Musazzi and published by Springer. This book was released on 2014-07-08 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the Laser-Induced Breakdown Spectroscopy (LIBS) a widely used atomic emission spectroscopy technique for elemental analysis of materials. It is based on the use of a high-power, short pulse laser excitation. The book is divided into two main sections: the first one concerning theoretical aspects of the technique, the second one describing the state of the art in applications of the technique in different scientific/technological areas. Numerous examples of state of the art applications provide the readers an almost complete scenario of the LIBS technique. The LIBS theoretical aspects are reviewed. The book helps the readers who are less familiar with the technique to understand the basic principles. Numerous examples of state of the art applications give an almost complete scenario of the LIBS technique potentiality. These examples of applications may have a strong impact on future industrial utilization. The authors made important contributions to the development of this field.
Download or read book Dorland s Dictionary of Medical Acronyms and Abbreviations written by Dorland and published by Elsevier Health Sciences. This book was released on 2015-07-24 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical acronyms and abbreviations offer convenience, but those countless shortcuts can often be confusing. Now a part of the popular Dorland's suite of products, this reference features thousands of terms from across various medical specialties. Its alphabetical arrangement makes for quick reference, and expanded coverage of symbols ensures they are easier to find. Effective communication plays an important role in all medical settings, so turn to this trusted volume for nearly any medical abbreviation you might encounter. - Symbols section makes it easier to locate unusual or seldom-used symbols. - Convenient alphabetical format allows you to find the entry you need more intuitively. - More than 90,000 entries and definitions. - Many new and updated entries including terminology in expanding specialties, such as Nursing; Physical, Occupational, and Speech Therapies; Transcription and Coding; Computer and Technical Fields. - New section on abbreviations to avoid, including Joint Commission abbreviations that are not to be used. - Incorporates updates suggested by the Institute for Safe Medication Practices (ISMP).
Download or read book Transportation Proceedings written by and published by . This book was released on 1969 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Download or read book Electro Optics Handbook written by Ronald Waynant and published by McGraw Hill Professional. This book was released on 2000-04-06 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: All-inclusive opto electronics guide A valuable "must-have" tool for electronic and optical engineers, this Handbook is the only single-volume, tell-it-all guide to the use of optical devices and light in electronics systems. Developed by a towering figure in the field, this manual familiarizes you with UV, VUV and X-Ray lasers; visible, solid-state, semiconductor and infrared gas lasers; FEL and ultrashort laser pulses; visible and infrared optical materials; infrared and imaging detectors; optical fibers and fiber optic sensors; holography; laser spectroscopy and photochemistry; high resolution lithography for optoelectronics; and much more. In this up-to-the-minute edition you'll find new chapters on optical communications, electro-optic devices, and high intensity optical fields, in addition to extensively updated material throughout, and abundant charts, diagrams and data tables.
