Download or read book GAS Turbine Combustion Second Edition written by Arthur H. Lefebvre and published by CRC Press. This book was released on 1998-09-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides understanding of the basic physical, chemical, and aerodynamic processes associated with gas turbine combustion and their relevance and application to combustor performance and design. It also introduces the many new concepts for ultra-low emissions combustors, and new advances in fuel preparation and liner wall-cooling techniques for their success. It details advanced and practical approaches to combustor design for the clean burning of alternative liquid fuels derived from oil shades, tar sands, and coal. Additional topics include diffusers, combustion performance fuel injection, combustion noise, heat transfer, and emissions.
Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po
Download or read book Combustion Engineering Second Edition written by Kenneth W. Ragland and published by CRC Press. This book was released on 2011-06-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Second Edition maintains the same goal as the original: to present the fundamentals of combustion science with application to today’s energy challenges. Using combustion applications to reinforce the fundamentals of combustion science, this text provides a uniquely accessible introduction to combustion for undergraduate students, first-year graduate students, and professionals in the workplace. Combustion is a critical issue impacting energy utilization, sustainability, and climate change. The challenge is to design safe and efficient combustion systems for many types of fuels in a way that protects the environment and enables sustainable lifestyles. Emphasizing the use of combustion fundamentals in the engineering and design of combustion systems, this text provides detailed coverage of gaseous, liquid and solid fuel combustion, including focused coverage of biomass combustion, which will be invaluable to new entrants to the field. Eight chapters address the fundamentals of combustion, including fuels, thermodynamics, chemical kinetics, flames, detonations, sprays, and solid fuel combustion mechanisms. Eight additional chapters apply these fundamentals to furnaces, spark ignition and diesel engines, gas turbines, and suspension burning, fixed bed combustion, and fluidized bed combustion of solid fuels. Presenting a renewed emphasis on fundamentals and updated applications to illustrate the latest trends relevant to combustion engineering, the authors provide a number of pedagogic features, including: Numerous tables with practical data and formulae that link combustion fundamentals to engineering practice Concise presentation of mathematical methods with qualitative descriptions of their use Coverage of alternative and renewable fuel topics throughout the text Extensive example problems, chapter-end problems, and references These features and the overall fundamentals-to-practice nature of this book make it an ideal resource for undergraduate, first level graduate, or professional training classes. Students and practitioners will find that it is an excellent introduction to meeting the crucial challenge of engineering sustainable combustion systems in a cost-effective manner. A solutions manual and additional teaching resources are available with qualifying course adoption.
Download or read book Gas Turbine Performance written by Philip P. Walsh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant addition to the literature on gas turbine technology, the second edition of Gas Turbine Performance is a lengthy text covering product advances and technological developments. Including extensive figures, charts, tables and formulae, this book will interest everyone concerned with gas turbine technology, whether they are designers, marketing staff or users.
Download or read book Aircraft Engines and Gas Turbines second edition written by Jack L. Kerrebrock and published by MIT Press. This book was released on 1992-04-22 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Engines and Gas Turbines is widely used as a text in the United States and abroad, and has also become a standard reference for professionals in the aircraft engine industry. Unique in treating the engine as a complete system at increasing levels of sophistication, it covers all types of modern aircraft engines, including turbojets, turbofans, and turboprops, and also discusses hypersonic propulsion systems of the future. Performance is described in terms of the fluid dynamic and thermodynamic limits on the behavior of the principal components: inlets, compressors, combustors, turbines, and nozzles. Environmental factors such as atmospheric pollution and noise are treated along with performance. This new edition has been substantially revised to include more complete and up-to-date coverage of compressors, turbines, and combustion systems, and to introduce current research directions. The discussion of high-bypass turbofans has been expanded in keeping with their great commercial importance. Propulsion for civil supersonic transports is taken up in the current context. The chapter on hypersonic air breathing engines has been expanded to reflect interest in the use of scramjets to power the National Aerospace Plane. The discussion of exhaust emissions and noise and associated regulatory structures have been updated and there are many corrections and clarifications.
Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2014-10-23 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering basic theory, components, installation, maintenance, manufacturing, regulation and industry developments, Gas Turbines: A Handbook of Air, Sea and Land Applications is a broad-based introductory reference designed to give you the knowledge needed to succeed in the gas turbine industry, land, sea and air applications.Providing the big picture view that other detailed, data-focused resources lack, this book has a strong focus on the information needed to effectively decision-make and plan gas turbine system use for particular applications, taking into consideration not only operational requirements but long-term life-cycle costs in upkeep, repair and future use.With concise, easily digestible overviews of all important theoretical bases and a practical focus throughout, Gas Turbines is an ideal handbook for those new to the field or in the early stages of their career, as well as more experienced engineers looking for a reliable, one-stop reference that covers the breadth of the field. Covers installation, maintenance, manufacturer's specifications, performance criteria and future trends, offering a rounded view of the area that takes in technical detail as well as well as industry economics and outlook Updated with the latest industry developments, including new emission and efficiency regulations and their impact on gas turbine technology Over 300 pages of new/revised content, including new sections on microturbines, non-conventional fuel sources for microturbines, emissions, major developments in aircraft engines, use of coal gas and superheated steam, and new case histories throughout highlighting component improvements in all systems and sub-systems
Download or read book Aircraft Engines and Gas Turbines written by Jack L. Kerrebrock and published by Mit Press. This book was released on 1992 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Engines and Gas Turbines is widely used as a text in the United States and abroad, and has also become a standard reference for professionals in the aircraft engine industry. Unique in treating the engine as a complete system at increasing levels of sophistication, it covers all types of modern aircraft engines, including turbojets, turbofans, and turboprops, and also discusses hypersonic propulsion systems of the future. Performance is described in terms of the fluid dynamic and thermodynamic limits on the behavior of the principal components: inlets, compressors, combustors, turbines, and nozzles. Environmental factors such as atmospheric pollution and noise are treated along with performance.This new edition has been substantially revised to include more complete and up-to-date coverage of compressors, turbines, and combustion systems, and to introduce current research directions. The discussion of high-bypass turbofans has been expanded in keeping with their great commercial importance. Propulsion for civil supersonic transports is taken up in the current context. The chapter on hypersonic air breathing engines has been expanded to reflect interest in the use of scramjets to power the National Aerospace Plane. The discussion of exhaust emissions and noise and associated regulatory structures have been updated and there are many corrections and clarifications.Jack L. Kerrebrock is Richard Cockburn Maclaurin Professor of Aeronautic's and Astronautics at the Massachusetts Institute of Technology.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Aircraft Propulsion and Gas Turbine Engines written by Ahmed F. El-Sayed and published by CRC Press. This book was released on 2017-07-06 with total page 1448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Propulsion and Gas Turbine Engines, Second Edition builds upon the success of the book’s first edition, with the addition of three major topic areas: Piston Engines with integrated propeller coverage; Pump Technologies; and Rocket Propulsion. The rocket propulsion section extends the text’s coverage so that both Aerospace and Aeronautical topics can be studied and compared. Numerous updates have been made to reflect the latest advances in turbine engines, fuels, and combustion. The text is now divided into three parts, the first two devoted to air breathing engines, and the third covering non-air breathing or rocket engines.
Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.
Download or read book Fundamentals of Gas Turbines written by William W. Bathie and published by John Wiley & Sons. This book was released on 1996 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the fundamentals of the gas turbine engine, including cycles, components, component matching, and environmental considerations.
Download or read book Gas Turbine Emissions written by Timothy C. Lieuwen and published by Cambridge University Press. This book was released on 2013-07-08 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of clean, sustainable energy systems is a preeminent issue in our time. Gas turbines will continue to be important combustion-based energy conversion devices for many decades to come, used for aircraft propulsion, ground-based power generation, and mechanical-drive applications. This book compiles the key scientific and technological knowledge associated with gas turbine emissions into a single authoritative source.
Download or read book Gas Turbine Emissions written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2013-07-08 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of clean, sustainable energy systems is one of the pre-eminent issues of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage, and gas turbines will continue to be important combustion-based energy conversion devices for many decades to come, used for aircraft propulsion, ground-based power generation, and mechanical-drive applications. This book compiles the key scientific and technological knowledge associated with gas turbine emissions into a single authoritative source. The book has three sections: the first section reviews major issues with gas turbine combustion, including design approaches and constraints, within the context of emissions. The second section addresses fundamental issues associated with pollutant formation, modeling, and prediction. The third section features case studies from manufacturers and technology developers, emphasizing the system-level and practical issues that must be addressed in developing different types of gas turbines that emit pollutants at acceptable levels.
Download or read book Aerothermodynamics of Gas Turbine and Rocket Propulsion written by Gordon C. Oates and published by AIAA. This book was released on 1997 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Handbook Second Edition written by Tony Giampaolo and published by Fairmont Press. This book was released on 2002-12-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.
Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2011-04-01 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major reference book offers the professional engineer - and technician - a wealth of useful guidance on nearly every aspect of gas turbine design, installation, operation, maintenance and repair. The author is a noted industry expert, with experience in both civilian and military gas turbines, including close work as a technical consultant for GE and Rolls Royce. • Guidance on installation, control, instrumentation/calibration, and maintenance, including lubrication, air seals, bearings, and filters• Unique compendium of manufacturer’s specifications and performance criteria, including GE, and Rolls-Royce engines• Hard-to-find help on the economics and business-management aspect of turbine selection, life-cycle costs, and the future trends of gas turbine development and applications in aero, marine, power generation and beyond
Download or read book Elements of Gas Turbine Propulsion written by Jack D. Mattingly and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to gas turbine engines and jet propulsion for aerospace or mechanical engineers. The text is divided into four parts: introduction to aircraft propulsion; basic concepts and one-dimensional/gas dynamics; parametric (design point) and performance (off-design) analysis of air breathing propulsion systems; and analysis and design of major gas turbine engine components (fans, compressors, turbines, inlets, nozzles, main burners, and afterburners). Design concepts are introduced early (aircraft performance in introductory chapter) and integrated throughout. Written with extensive student input on the design of the book, the book builds upon definitions and gradually develops the thermodynamics, gas dynamics, and gas turbine engine principles.
