Download or read book Future Directions in Polymer Colloids written by Mohamed S. El-Aasser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future Directions In Polymer Colloids Hohamed S. EI-Aasser, and Robert H. Fitch (editors) It is appropriate that the first NATO-Advanced Research Workshop on "FUTURE DIRECTIONS IN POLYMER COLLOIDS" was held approximately fifty years after the first synthetic polymer latexes were made on a commercial scale during the mid-1930s. Since that time the field of what is now known as polymer colloids has been evolving rapidly, not only on the practical level, but also on the scientific and engineering levels. Billions of pounds of copolymers are manufactured annually by means of the emulsion polymerization process. "Commodity" polymers as well "specialty" polymers are prepared today for use in a wide variety of applications: synthetic rubber, floor coatings, paints, adhesives, binders for non-woven fabrics, high-impact polymers latex foam, additives for construction materials such as cement and concrete, and rheological modifiers. They are also used in numerous biomedical applications: such as diagnostic tests, immunoassays, biological cell-labeling, (identi fication and separation), and drug delivery systems. Small quantities of monodisperse polymer colloids are used as size calibration standards and find extensive use as model colloids to test theories in colloids surface and rheological studies. Advances have been made in our understanding of the mechanism and kinetics of the emulsion polymerization process as well as the stability of polymer colloids. Equal advances were made in engineering areas related to polymer colloids, e. g. modeling of batch, semi-continuous and continuous emulsion polymerization and copolymer ization processes.

Download or read book New Directions in Guided Wave and Coherent Optics written by D.B. Ostrowsky and published by Springer. This book was released on 1971-01-31 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: As optical fiber communication systems have moved out of the laboratory and into commercial use over the past several years, the general field of guided wave and coherent optics has undergone a radical transformation. Research in optical communication has turned heavily towards single-mode technology and, totally new phenomena and applications of the existing technology, outside the communication field, have begun to proliferate. It was for this reason that we decided to organize a NATO Advanced Study Institute assembling the leading workers in this new domain, in order to define the state of the art, and, develop an idea of the new directions the field might take. The lectures and seminars presented at this Advanced Study Institute form the basis for this book. The subjects treated can be roughly grouped as : - New phenomena in optical fibers such as non-linear effects, soliton propagation and polarization conservation. - New applications of fibers, to measurements of rotation pressure, temperature etc ... and medical uses. - Advanced and exploratory work on single-mode fiber communica tion systems including the use of coherent transmission schemes and optical amplification. - Recent developments of optical information treatment based on four-wave mixing. - Integrated optical devices and technologies including bistable devices, parametric oscillators, and optical logic. In addition to these major topics, a number of national reviews and specialized seminars treating new guided wave structures and materials are included. The co-editors admit being rather pleased with the result.

Download or read book Polymer Colloids written by Robert Fitch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid Science is an ancient art. Unfortunately many scientists still regard it as such~ We hope that this book will dispel all such illusions by providing convincing evidence that a quiet renaissance has occurred. The New Colloid Science is based on rigorous, quantitative theory and works with extremely well de fined experimental systems. The former was first made possible by the advent of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of the stability of lyophobic colloids in 1948. This is based on a consideration of the electrostatic interactions among colloidal par ticles bearing fixed charges in a medium containing moving counter ions. The Hamiltonian formulation of this model by Weiss, Mock, and Moon herein is a significant development in our theoretical pro gress. During about the same period we have advanced experimentally from poorly defined "glue-like" systems to monodisperse colloids, synthesized for the first time in 1955 when J. W. Vanderhoff and E. B. Bradford announced their polystyrene colloids with extremely narrow particle size distributions. Vanderhoff and his coworkers have now set another milestone by fully characterizing the surfaces of these systems, as described in this monograph. The revolution is snowballing. Krieger and his coworkers have shown that the opalescent colors exhibited by "deionized" monodis perse latexes are due to Bragg diffraction of these liquid-crystal systems, that they exhibit reversible "melting" and that they may serve as macroscopic models for order-disorder phenomena.

Download or read book Polymer Colloids II written by Robert M. Fitch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is comprised of most of the papers presented at a symposium held in Miami Beach during the national meeting of the American Chemical Society in September, 1978. In a sense, it is a sequel to the first ACS symposium held on this topic and published under the title "Polymer Colloids" in 1971 by Plenum Press. That volume contained 12 papers, whereas "Polymer Colloids II" contains 33, an indication of the magnitude of the growth of the field in less than a decade. Increased sophistication probably best characterizes the changes which have taken place, especially in the realm of instru mentation. Ten years ago techniques such as quasielastic light scattering, X-ray photoelectron spectroscopy (XPS - also known as ESCA), ion scattering spectroscopy (ISS), ultrasonic absorption spectroscopy and hydrodynamic exclusion chromatography (REC) were unavailable to the polymer colloid chemist. Recent advances in all of these methods are described in this volume. Although the book deals primarily with "synthetic latexes" or "emulsion polymers" as colloids, there are a number of papers which deal with their synthesis: particle nucleation in emulsion polymer ization, the synthesis of emulsifier-free polymer colloids using novel reagents, molecular weight distributions derived from the kinetics of emulsion polymerization, and anionically polymerized non-aqueous polymer colloids. The kinetics and thermodynamics of the swelling of latex particles by monomers is also dealt with here.

Download or read book Emulsion Polymerisation and Latex Applications written by Christopher D. Anderson and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term latex covers emulsion polymers, polymer dispersions and polymer colloids. This review report provides a general overview of the emulsion polymerisation processes and explains how the resulting latices are used in industrial applications. The classes of emulsion polymers are surveyed and the commercial technologies and potential future uses discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.

Download or read book Science and Technology of Polymer Colloids written by Gary W. Poehlein and published by Springer. This book was released on 1983 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings of the NATO Advanced Study Institute on Polymer Colloids, University of Bristol, Bristol, UK, June 28-July 8, 1982"--Verso t.p.

Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.

Download or read book An Introduction to Polymer Colloids written by Françoise Candau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in the subject of Polymer Colloids over the last twenty five years or so has been very large resulting now in major international conferences on an annual basis and many national ones as well. The interest stems not only from the wide range of applications of these materials but also from a curiosity as to the mechanism of formation and their growing use as model particles to investigate fundamental aspects of physics and chemistry. In July 1988 a NATO Advanced Study Institute was held in Strasbourg, France, at the Centre St. Thomas. As an educational introduction to this I nstitute a series of eight lectures was given to cover the fundamental aspects of the subject. These eight lectures have now been compiled into an Introductory Text covering, emulsion poly merization, dispersion polymerization, inverse emulsion polymerization, the morphology of copolymer latices, the colloidal properties of latices, characterization methods and rheology. It is hoped that these will serve a wide audience, undergraduates, graduate-students and research workers, both in industry and academe. The chapters all contain review material up to date at the time of publication. fhe 1988 NATO Advanced Study I nstitute was made possible by a grant from the NATO-AS I programme and the following companies: BASF, Ludwigshafen, West Germany The Dow Chemical Company, Michigan, USA Dow Chemical Rheinwerk GmbH, Rheinmunster, West Germany ICI PLC, Runcorn, England S. C. Johnson and Son Inc., Racine, USA NORSOLOR, Verneuil en Halatte, France Rhone Poulenc, Aubervilliers, France.

Download or read book Surface and Colloid Science written by Fernando Galembeck and published by Springer Science & Business Media. This book was released on 2004-12-08 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 58 contributions to the 11th International Conference on Surface and Colloid Science, a highly successful conference sponsored by the International Association of Colloid and Interface Scientists and held in Iguassu Falls, Brazil, in September 2003. Topics covered are the following: Biocolloids and Biological Applications, Charged Particles and Interfaces, Colloid Stability, Colloidal Dispersions, Environmental Colloidal Science, Interfaces and Adsorption, Nanostructures and Nanotechnology, Self-Assembly and Structured Fluids, Surfactants and Polymers, Technology and Applications, Colloids and Surfaces in Oil Production. Surface and colloid science has acquired great momentum during the past twenty years and this volume is a good display of new results and new directions in this important area.

Download or read book Functional Polymer Colloids Microparticles written by Reza Arshady and published by . This book was released on 2002 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Colloidal Polymers written by Abdelhamid Elaissari and published by CRC Press. This book was released on 2003-08-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amidst developments in nanotechnology and successes in catalytic emulsion polymerization of olefins, polymerization in dispersed media is arousing an increasing interest from both practical and fundamental points of view. This text describes ultramodern approaches to synthesis, preparation, characterization, and functionalization of latexes, nanoparticles, and numerous additional colloidal polymer systems. In chapters contributed by leading international researchers, it communicates critical parameters for method selection, presents guidelines for controlling structural and colloid properties, presents recent results and information on polymer colloids, and describes other tools to assist in the production of desirable outcomes.

Download or read book Emerging Themes in Polymer Science written by Anthony J Ryan and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books offer coverage of the current work of top researchers, but rarely is any attempt made to look beyond the present day. Emerging Themes in Polymer Science is a unique book which not only documents the latest research but also provides an insight into the likely future of polymer science. At the heart of the debate, and a key feature of the book, is the relationship between polymer science and biology. Also discussed are polymer semi-conductors and devices; polymer colloids; biomaterials; tissue engineering and polymers; neutron and synchrotron research; theory; and rheology. Anyone involved in polymer research, including those in the fields of electronics and nanotechnology, will welcome this book.

Download or read book Polymer Mediated Phase Stability of Colloids written by Álvaro González García and published by Springer Nature. This book was released on 2019-10-28 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid–polymer mixtures are subject of intensive research due to their wide range of applicability, for instance in coatings and food-stuffs. This thesis constitutes a fundamental investigation towards a better control over the stability of such suspensions. Through the chapters, different key parameters governing the stability of colloid–polymer mixtures are explored. How the colloid (pigment) shape and the effective polymer-colloid affinity modulate the stability of the suspension are examples of these key parameters. Despise the mostly theoretical results presented, the thesis is written in a format accessible to a broad scientific audience. Some of the equations of state presented might of direct use to experimentalists. Furthermore, new theoretical insights about colloid–polymer mixtures are put forward. These include four-phase coexistences in effective two-component, quantification of depletant partitioning at high colloidal concentrations, multiple re-entrant phase behaviour of the colloidal fluid–solid coexistence, and a condition where polymers are neither depleted nor adsorbed from/to the colloidal surface.

Download or read book Colloidal Biomolecules Biomaterials and Biomedical Applications written by Abdelhamid Elaissari and published by CRC Press. This book was released on 2003-10-21 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Biomolecules, Biomaterials, and Biomedical Applications is an authoritative presentation of established and recent techniques promising to revolutionize the areas of biomedical diagnostics, therapeutics, pharmaceutics, and drug delivery. This exceptional book details an original homogeneous assay for biomolecule detection and capture through duplex colloid particles, as well as new methods for utilizing peptides in particle agglutination. Featuring contributions from over 30 prominent researchers, it investigates physical studies of the agglutination of sensitive latexes, and indicates benefits to drug delivery through supercritical fluid process production of polymer particles.

Download or read book Science and Technology of Polymer Colloids Characterization stabilization and application properties written by Gary W. Poehlein and published by . This book was released on 1983 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Surface and Colloid Science written by P. Somasundaran and published by CRC Press. This book was released on 2006 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerisation produces high value polymers in a low cost, environmentally friendly process. The drive to develop environmentally benign production methods for polymers has resulted in widespread development and implementation of the emulsion polymerisation technique. In addition, when combined with novel polymerisation mechanisms the process can give rise to a range of polymer products with particularly useful properties. Emulsion polymerisation is a complex process, governed by the interplay of both chemical and physical properties including polymerisation kinetics and dispersion stability. Successful industrial application relies on understanding and controlling those properties. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, Chemistry and Technology of Emulsion Polymerisation provides a practical and intuitive explanation of emulsion polymerisation. In the development of industrial processes, coupling that understanding with everyday practice can be a further difficult step, so the book emphasises a clear, comprehensive and straightforward discussion to illustrate how the principles relate to practical application. Written for research chemists, technologists and engineers in the polymer, fine and specialty chemicals industries, and in university or government laboratories, this book will be particularly valuable to those early on in their careers. The comprehensive and straightforward coverage will also ensure it is an important resource for advanced courses in emulsion polymerisation.