Download or read book Fundamentals of Turbomachinery written by William W. Peng and published by John Wiley & Sons. This book was released on 2007-12-21 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to turbomachines and their applications With up-to-date coverage of all types of turbomachinery for students and practitioners, Fundamentals of Turbomachinery covers machines from gas, steam, wind, and hydraulic turbines to simple pumps, fans, blowers, and compressors used throughout industry. After reviewing the history of turbomachinery and the fluid mechanical principles involved in their design and operation, the book focuses on the application and selection of machines for various uses, teaching basic theory as well as how to select the right machine for a specific use. With a practical emphasis on engineering applications of turbomachines, this book discusses the full range of both turbines and pumping devices. For each type, the author explains: * Basic principles * Preliminary design procedure * Ideal performance characteristics * Actual performance curves published by the manufacturers * Application and appropriate selection of the machine Throughout, worked sample problems illustrate the principles discussed and end-of-chapter problems, employing both SI and the English system of units, provide practice to help solidify the reader's grasp of the material.
Download or read book Fundamentals of Turbomachines written by Erik Dick and published by Springer. This book was released on 2015-03-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the working principles of all kinds of turbomachines. The same theoretical framework is used to analyse the different machine types. Fundamentals are first presented and theoretical concepts are then elaborated for particular machine types, starting with the simplest ones.For each machine type, the author strikes a balance between building basic understanding and exploring knowledge of practical aspects. Readers are invited through challenging exercises to consider how the theory applies to particular cases and how it can be generalised. The book is primarily meant as a course book. It teaches fundamentals and explores applications. It will appeal to senior undergraduate and graduate students in mechanical engineering and to professional engineers seeking to understand the operation of turbomachines. Readers will gain a fundamental understanding of turbomachines. They will also be able to make a reasoned choice of turbomachine for a particular application and to understand its operation. Basic design of the simplest turbomachines as a centrifugal fan, an axial steam turbine or a centrifugal pump, is also possible using the topics covered in the book.
Download or read book Fundamentals Of Turbomachinery written by VENKANNA, B. K. and published by PHI Learning Pvt. Ltd.. This book was released on 2009 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the basic principles of turbomachinery in a clear, practical presentation that ties theory logically and rigorously with the design and application part of turbomachines such as centrifugal compressors, centrifugal pumps, axial flow compressors, steam and gas turbines, and hydraulic turbines. The contents of the book have been designed to meet the requirements of undergraduate and postgraduate students of mechanical engineering. The book helps students develop an intuitive understanding of fluid machines by honing them through a systematic problem-solving methodology. Key Features Simple and elegant presentation to enable students to grasp the essentials of the subject easily and quickly Focuses on problem-solving techniques Provides an excellent selection of more than 300 graded solved examples to foster understanding of the theory Gives over 100 chapter-end problems Provides a succinct summary of equations at the end of each chapter Provides solutions to several question papers at the end of the book.
Download or read book Principles of Turbomachinery written by Seppo A. Korpela and published by John Wiley & Sons. This book was released on 2019-07-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: A newly updated and expanded edition that combines theory and applications of turbomachinery while covering several different types of turbomachinery In mechanical engineering, turbomachinery describes machines that transfer energy between a rotor and a fluid, including turbines, compressors, and pumps. Aiming for a unified treatment of the subject matter, with consistent notation and concepts, this new edition of a highly popular book provides all new information on turbomachinery, and includes 50% more exercises than the previous edition. It allows readers to easily move from a study of the most successful textbooks on thermodynamics and fluid dynamics to the subject of turbomachinery. The book also builds concepts systematically as progress is made through each chapter so that the user can progress at their own pace. Principles of Turbomachinery, 2nd Edition provides comprehensive coverage of everything readers need to know, including chapters on: thermodynamics, compressible flow, and principles of turbomachinery analysis. The book also looks at steam turbines, axial turbines, axial compressors, centrifugal compressors and pumps, radial inflow turbines, hydraulic turbines, hydraulic transmission of power, and wind turbines. New chapters on droplet laden flows of steam and oblique shocks help make this an incredibly current and well-rounded resource for students and practicing engineers. Includes 50% more exercises than the previous edition Uses MATLAB or GNU/OCTAVE for all the examples and exercises for which computer calculations are needed, including those for steam Allows for a smooth transition from the study of thermodynamics, fluid dynamics, and heat transfer to the subject of turbomachinery for students and professionals Organizes content so that more difficult material is left to the later sections of each chapter, allowing instructors to customize and tailor their courses for their students Principles of Turbomachinery is an excellent book for students and professionals in mechanical, chemical, and aeronautical engineering.
Download or read book Introduction to Turbomachinery written by David Japikse and published by . This book was released on 1997 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on many years of hands-on teaching experience involving students and practicing engineers alike, this text offers an ideal introduction to the design and performance of turbomachinery. Pumps, compressors, and turbines are described in detail, with emphasis on their key features and the flow equations relevant to each part of the machine. Experimental data are presented to aid understanding. Also covered are boundary layer and computational techniques for flow prediction, stability limits, and structural and modal analysis of blades and rotors. Test bed, laboratory, and workshop procedures for turbomachinery development together with instrumentation issues are also covered, drawing on the authors' wide experience. Fully illustrated and comprehensive in its treatment of turbomachinery types, Introduction to Turbomachinery provides the most up-to-date account of the subject for final-year undergraduates or new graduates beginning a study of turbomachinery, as well as a refresher and reference text for established practitioners.
Download or read book Principles of Turbomachinery written by R. K. Turton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text outlines the fluid and thermodynamic principles that apply to all classes of turbomachines, and the material has been presented in a unified way. The approach has been used with successive groups of final year mechanical engineering students, who have helped with the development of the ideas outlined. As with these students, the reader is assumed to have a basic understanding of fluid mechanics and thermodynamics. However, the early chapters combine the relevant material with some new concepts, and provide basic reading references. Two related objectives have defined the scope of the treatment. The first is to provide a general treatment of the common forms of turbo machine, covering basic fluid dynamics and thermodynamics of flow through passages and over surfaces, with a brief derivation of the fundamental governing equations. The second objective is to apply this material to the various machines in enough detail to allow the major design and performance factors to be appreciated. Both objectives have been met by grouping the machines by flow path rather than by application, thus allowing an appreciation of points of similarity or difference in approach. No attempt has been made to cover detailed points of design or stressing, though the cited references and the body of information from which they have been taken give this sort of information. The first four chapters introduce the fundamental relations, and the suc ceeding chapters deal with applications to the various flow paths.
Download or read book Fluid Mechanics Thermodynamics of Turbomachinery written by Sydney Lawrence Dixon and published by Pergamon. This book was released on 1978 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated, this well established and highly successful book gives a competent account of the fundamental theory of turbomachines. A concise and unified approach to the subject is employed which fills the need for a comprehensive introductory text suitable for most engineering curricula. The theoretical approach, based firmly on the fundamental principles of thermodynamics and fluid mechanics, makes the book particularly suitable for undergraduate courses. It has also proved very useful to professional engineers who require a relevant text on the basic physical processes in turbomachines and their theoretical representation. Several modifications have been incorporated in the text in the light of recent advances in the subject. Further information on cavitation has been included and a new section on the optimum design of a pump inlet taking account of cavitation limitations has been added. Certain chapters have been extended: the section on 'Constant specific mass flow' design now includes the flow equations for a following rotor row, and the section on the definition of blade shapes has been extended to include the parabolic arc camber line blade. A list of symbols used in the text has been added. Each chapter contains a selection of useful problems and answers are provided at the end of the book. SI/Metric units are used throughout
Download or read book Basic Concepts in Turbomachinery written by and published by Bookboon. This book was released on with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbomachinery written by Marco Gambini and published by Springer Nature. This book was released on 2020-09-17 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of preliminary sizing procedures for turbomachinery. Applicable to both conventional and non-conventional fluids, these procedures enable users to optimize the kinematics, thermodynamics and geometry of the turbomachinery (in the preliminary design phase) using geometric correlations and losses models; to accurately predict the efficiency of turbomachinery – in most cases, in excellent agreement with CFD calculations; and to consistently analyze all turbomachines (axial and radial turbines, axial and centrifugal compressors, centrifugal pumps). The book is intended for bachelor's and master's students in industrial, mechanical and energy engineering, as well as researchers and professionals in the energy systems and turbomachinery sectors, guiding them step by step through the first sizing of turbomachines and the verification of the technological feasibility of turbomachines designed for new conversion systems operating with unconventional fluids.
Download or read book Logan s Turbomachinery written by Bijay Sultanian and published by CRC Press. This book was released on 2019-01-15 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Logan's Turbomachinery: Flowpath Design and Performance Fundamentals, Third Edition is the long-awaited revision of this classic textbook, thoroughly updated by Dr. Bijay Sultanian. While the basic concepts remain constant, turbomachinery design has advanced since the Second Edition was published in 1993. Airfoils in modern turbomachines feature three-dimensional geometries, Computational Fluid Mechanics (CFD) has become a standard design tool, and major advances have been made in the materials and manufacturing technologies that affect turbomachinery design. The new edition adresses these trends to best serve today's students, and design engineers working in turbomachinery industries.
Download or read book Principles of Turbomachinery in Air Breathing Engines written by Erian A. Baskharone and published by Cambridge University Press. This book was released on 2006-07-31 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for advanced undergraduate and graduate students in mechanical and aerospace engineering taking a course commonly called Principles of Turbomachinery or Aerospace Propulsion. The book begins with a review of basic thermodynamics and fluid mechanics principles to motive their application to aerothermodynamics and real-life design issues. This approach is ideal for the reader who will face practical situations and design decisions in the gas turbine industry. The text is fully supported by over 200 figures, numerous examples, and homework problems.
Download or read book Turbomachinery written by Rama S.R. Gorla and published by CRC Press. This book was released on 2003-08-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbomachinery presents the theory and design of turbomachines with step-by-step procedures and worked-out examples. This comprehensive reference emphasizes fundamental principles and construction guidelines for enclosed rotators and contains end-of-chapter problem and solution sets, design formulations, and equations for clear understanding of key aspects in machining function, selection, assembly, and construction. Offering a wide range of illustrative examples, the book evaluates the components of incompressible and compressible fluid flow machines and analyzes the kinematics and dynamics of turbomachines with valuable definitions, diagrams, and dimensionless parameters.
Download or read book Turbomachinery Flow Physics and Dynamic Performance written by Meinhard T. Schobeiri and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past three decades turbomachines experienced a steep increase in efficiency and performance. Based on fundamental principles of turbomachinery thermo-fluid mechanics, numerous CFD based calculation methods are being developed to simulate the complex 3-dimensional, highly unsteady turbulent flow within turbine or compressor stages. The objective of this book is to present the fundamental principals of turbomachinery fluid-thermodynamic design process of turbine and compressor components, power generation and aircraft gas turbines in a unified and compact manner. The book provides senior undergraduate students, graduate students and engineers in the turbomachinery industry with a solid background of turbomachinery flow physics and performance fundamentals that are essential for understanding turbomachinery performance and flow complexes.
Download or read book Turbomachinery Fluid Dynamics and Heat Transfer written by Hah and published by CRC Press. This book was released on 1997-02-04 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This festschrift in honor of Professor Budugur Lakshminarayana's 60th birthday-based on the proceedings of a symposium on Turbomachinery Fluid Dynamics and Heat Transfer held recently at The Pennsylvania State University, University Park-provides authoritative and conclusive research results as well as new insights into complex flow features found in the turbomachinery used for propulsion, power, and industrial applications. Explaining in detail compressors, heat transfer fields in turbines, computational fluid dynamics, and unsteady flows, Turbomachinery Fluid Dynamics and Heat Transfer covers: Mixing mechanisms, annulus wall boundary layers, and the flow field in transonic turbocompressors The numerical implementation of turbulence models in a computer code Secondary flows, film cooling, and thermal turbulence modeling The visualization method of modeling using liquid crystals Innovative techniques in the computational modeling of compressor and turbine flows measurement in unsteady flows as well as axial flows and compressor noise generation And much more Generously illustrated and containing key bibliographic citations, Turbomachinery Fluid Dynamics and Heat Transfer is an indispensable resource for mechanical, design, aerospace, marine, manufacturing, materials, industrial, and reliability engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Aerothermodynamics of Turbomachinery written by Naixing Chen and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is now an essential and effective tool used in the design of all types of turbomachine, and this topic constitutes the main theme of this book. With over 50 years of experience in the field of aerodynamics, Professor Naixing Chen has developed a wide range of numerical methods covering almost the entire spectrum of turbomachinery applications. Moreover, he has also made significant contributions to practical experiments and real-life designs. The book focuses on rigorous mathematical derivation of the equations governing flow and detailed descriptions of the numerical methods used to solve the equations. Numerous applications of the methods to different types of turbomachine are given and, in many cases, the numerical results are compared to experimental measurements. These comparisons illustrate the strengths and weaknesses of the methods – a useful guide for readers. Lessons for the design of improved blading are also indicated after many applications. Presents real-world perspective to the past, present and future concern in turbomachinery Covers direct and inverse solutions with theoretical and practical aspects Demonstrates huge application background in China Supplementary instructional materials are available on the companion website Aerothermodynamics of Turbomachinery: Analysis and Design is ideal for senior undergraduates and graduates studying in the fields of mechanics, energy and power, and aerospace engineering; design engineers in the business of manufacturing compressors, steam and gas turbines; and research engineers and scientists working in the areas of fluid mechanics, aerodynamics, and heat transfer. Supplementary lecture materials for instructors are available at www.wiley.com/go/chenturbo
Download or read book Structural Dynamics of Turbo Machines written by A. S. Rangwala and published by New Age International. This book was released on 2009 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: STRUCTURAL DYNAMICS OF TURBO-MACHINES presents a detailed and comprehensive treatment of structural vibration evaluation of turbo-machines. Starting with the fundamentals of the theory of vibration as related to various aspects of rotating machines, the dynamic analysis procedures of a broad spectrum of turbo-machines is covered. An in-depth procedure for analyzing the torsional and flexural oscillations of the components and of the rotor-bearing system is presented. The latest trends in design and analysis are presented, chief among them: Blade and coupled disk-blade mod.
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
