Download or read book Fundamentals of the Theory of Plasticity written by L. M. Kachanov and published by Courier Corporation. This book was released on 2013-09-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for use by advanced engineering students and professionals, this volume focuses on plastic deformation of metals at normal temperatures, as applied to strength of machines and structures. 1971 edition.
Download or read book Theory of Plasticity written by Jagabanduhu Chakrabarty and published by Elsevier. This book was released on 2012-12-02 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with the mechanics of materials deformed beyond their elastic limit. A strong knowledge of plasticity is essential for engineers dealing with a wide range of engineering problems, such as those encountered in the forming of metals, the design of pressure vessels, the mechanics of impact, civil and structural engineering, as well as the understanding of fatigue and the economical design of structures. Theory of Plasticity is the most comprehensive reference on the subject as well as the most up to date -- no other significant Plasticity reference has been published recently, making this of great interest to academics and professionals. This new edition presents extensive new material on the use of computational methods, plus coverage of important developments in cyclic plasticity and soil plasticity. A complete plasticity reference for graduate students, researchers and practicing engineers; no other book offers such an up to date or comprehensive reference on this key continuum mechanics subject Updates with new material on computational analysis and applications, new end of chapter exercises Plasticity is a key subject in all mechanical engineering disciplines, as well as in manufacturing engineering and civil engineering. Chakrabarty is one of the subject's leading figures.
Download or read book Fundamentals of Engineering Plasticity written by William F. Hosford and published by Cambridge University Press. This book was released on 2013-07-22 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: William Hosford's book is ideal for those involved in designing sheet metal forming processes. Knowledge of plasticity is essential for the computer simulation of metal forming processes and understanding the advances in plasticity theory is key to formulating sound analyses. The author makes the subject simple by avoiding notations used by specialists in mechanics. R. Hill's authoritative book, Mathematical Theory of Plasticity (1950), presented a comprehensive treatment of continuum plasticity theory up to that time; much of the treatment in this book covers the same ground, but focuses on more practical topics. Hosford has included recent developments in continuum theory, including a newer treatment of anisotropy that has resulted from calculations of yielding based on crystallography, analysis of the role of defects, and forming limit diagrams. A much greater emphasis is placed on deformation mechanisms and the book also includes chapters on slip and dislocation theory and twinning.
Download or read book Plasticity written by P.M. Dixit and published by CRC Press. This book was released on 2014-10-23 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the Principles of Plasticity Most undergraduate programs lack an undergraduate plasticity theory course, and many graduate programs in design and manufacturing lack a course on plasticity—leaving a number of engineering students without adequate information on the subject. Emphasizing stresses generated in the material and its effect, Plasticity: Fundamentals and Applications effectively addresses this need. This book fills a void by introducing the basic fundamentals of solid mechanics of deformable bodies. It provides a thorough understanding of plasticity theory, introduces the concepts of plasticity, and discusses relevant applications. Studies the Effects of Forces and Motions on Solids The authors make a point of highlighting the importance of plastic deformation, and also discuss the concepts of elasticity (for a clear understanding of plasticity, the elasticity theory must also be understood). In addition, they present information on updated Lagrangian and Eulerian formulations for the modeling of metal forming and machining. Topics covered include: Stress Strain Constitutive relations Fracture Anisotropy Contact problems Plasticity: Fundamentals and Applications enables students to understand the basic fundamentals of plasticity theory, effectively use commercial finite-element (FE) software, and eventually develop their own code. It also provides suitable reference material for mechanical/civil/aerospace engineers, material processing engineers, applied mechanics researchers, mathematicians, and other industry professionals.
Download or read book Theory of Metal Forming Plasticity written by Andrzej Sluzalec and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is to reveal and discuss some aspects of the metal fo- ing plasticity theory. The modern theory describes deformation of metallic bodies in cold and hot regimes under combined thermal and mechanical loadings. Th- mal and deformation fields appear in metal forming in various forms. A thermal field influences the material properties, modifies the extent of plastic zones, etc. and the deformation of metallic body induces changes in temperature distribution. The thermal effects in metal forming plasticity can be studied at two levels, - pending on whether uncoupled or coupled theories of thermo-plastic response have to be applied. A majority of metal forming processes can be satisfactorily studied within an uncoupled theory. In such an approach the temperature enters the stress-strain relation through the material constants and through the thermal dilatation. The description of thermo-plastic deformation in metal forming is c- ried out on the ground of thermodynamics.
Download or read book Continuum Theory of Plasticity written by Akhtar S. Khan and published by John Wiley & Sons. This book was released on 1995-02-28 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only modern, up-to-date introduction to plasticity Despite phenomenal progress in plasticity research over the past fifty years, introductory books on plasticity have changed very little. To meet the need for an up-to-date introduction to the field, Akhtar S. Khan and Sujian Huang have written Continuum Theory of Plasticity--a truly modern text which offers a continuum mechanics approach as well as a lucid presentation of the essential classical contributions. The early chapters give the reader a review of elementary concepts of plasticity, the necessary background material on continuum mechanics, and a discussion of the classical theory of plasticity. Recent developments in the field are then explored in sections on the Mroz Multisurface model, the Dafalias and Popov Two Surface model, the non-linear kinematic hardening model, the endochronic theory of plasticity, and numerous topics in finite deformation plasticity theory and strain space formulation for plastic deformation. Final chapters introduce the fundamentals of the micromechanics of plastic deformation and the analytical coupling between deformation of individual crystals and macroscopic material response of the polycrystal aggregate. For graduate students and researchers in engineering mechanics, mechanical, civil, and aerospace engineering, Continuum Theory of Plasticity offers a modern, comprehensive introduction to the entire subject of plasticity.
Download or read book Computational Methods for Plasticity written by Eduardo A. de Souza Neto and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of computational plasticity encapsulates the numerical methods used for the finite element simulation of the behaviour of a wide range of engineering materials considered to be plastic – i.e. those that undergo a permanent change of shape in response to an applied force. Computational Methods for Plasticity: Theory and Applications describes the theory of the associated numerical methods for the simulation of a wide range of plastic engineering materials; from the simplest infinitesimal plasticity theory to more complex damage mechanics and finite strain crystal plasticity models. It is split into three parts - basic concepts, small strains and large strains. Beginning with elementary theory and progressing to advanced, complex theory and computer implementation, it is suitable for use at both introductory and advanced levels. The book: Offers a self-contained text that allows the reader to learn computational plasticity theory and its implementation from one volume. Includes many numerical examples that illustrate the application of the methodologies described. Provides introductory material on related disciplines and procedures such as tensor analysis, continuum mechanics and finite elements for non-linear solid mechanics. Is accompanied by purpose-developed finite element software that illustrates many of the techniques discussed in the text, downloadable from the book’s companion website. This comprehensive text will appeal to postgraduate and graduate students of civil, mechanical, aerospace and materials engineering as well as applied mathematics and courses with computational mechanics components. It will also be of interest to research engineers, scientists and software developers working in the field of computational solid mechanics.
Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.
Download or read book Plasticity written by Alexander Mendelson and published by . This book was released on 1983 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Plasticity written by Z. R. Wang and published by John Wiley & Sons. This book was released on 2018-05-14 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: An all-in-one guide to the theory and applications of plasticity in metal forming, featuring examples from the automobile and aerospace industries Provides a solid grounding in plasticity fundamentals and material properties Features models, theorems and analysis of processes and relationships related to plasticity, supported by extensive experimental data Offers a detailed discussion of recent advances and applications in metal forming
Download or read book Plasticity and Geotechnics written by Hai-Sui Yu and published by Springer Science & Business Media. This book was released on 2007-01-11 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and Geotechnics is the first attempt to summarize and present in a single volume the major achievements in the field of plasticity theory for geotechnical materials and its applications to geotechnical analysis and design. The book emerges from the author’s belief that there is an urgent need for the geotechnical and solid mechanics community to have a unified presentation of plasticity theory and its application to geotechnical engineering.
Download or read book Basics of Continuum Plasticity written by Kwansoo Chung and published by Springer. This book was released on 2018-05-02 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the basic principles of plasticity for students and engineers who wish to perform plasticity analyses in their professional lives, and provides an introduction to the application of plasticity theories and basic continuum mechanics in metal forming processes. This book consists of three parts. The first part deals with the characteristics of plasticity and instability under simple tension or compression and plasticity in beam bending and torsion. The second part is designed to provide the basic principles of continuum mechanics, and the last part presents an extension of one-dimensional plasticity to general three-dimensional laws based on the fundamentals of continuum mechanics. Though most parts of the book are written in the context of general plasticity, the last two chapters are specifically devoted to sheet metal forming applications. The homework problems included are designed to reinforce understanding of the concepts involved. This book may be used as a textbook for a one semester course lasting fourteen weeks or longer. This book is intended to be self-sufficient such that readers can study it independently without taking another formal course. However, there are some prerequisites before starting this book, which include a course on engineering mathematics and an introductory course on solid mechanics.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Continuum Mechanics and Plasticity written by Han-Chin Wu and published by CRC Press. This book was released on 2004-12-20 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous advances in computer technologies and methods have precipitated a great demand for refinements in the constitutive models of plasticity. Such refinements include the development of a model that would account for material anisotropy and produces results that compare well with experimental data. Key to developing such models-and to meeting many other challenges in the field- is a firm grasp of the principles of continuum mechanics and how they apply to the formulation of plasticity theory. Also critical is understanding the experimental aspects of plasticity and material anisotropy. Integrating the traditionally separate subjects of continuum mechanics and plasticity, this book builds understanding in all of those areas. Part I provides systematic, comprehensive coverage of continuum mechanics, from a review of Carteisian tensors to the relevant conservation laws and constitutive equation. Part II offers an exhaustive presentation of the continuum theory of plasticity. This includes a unique treatment of the experimental aspects of plasticity, covers anisotropic plasticity, and incorporates recent research results related to the endochronic theory of plasticity obtained by the author and his colleagues. By bringing all of these together in one book, Continuum Mechanics and Plasticity facilitates the learning of solid mechanics. Its readers will be well prepared for pursuing either research related to the mechanical behavior of engineering materials or developmental work in engineering analysis and design.
Download or read book Foundations of the Theory of Plasticity written by Lazarʹ Markovich Kachanov and published by North-Holland. This book was released on 1971 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuum Theory of Plasticity written by Akhtar S. Khan and published by John Wiley & Sons. This book was released on 1995-02-28 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only modern, up-to-date introduction to plasticity Despite phenomenal progress in plasticity research over the past fifty years, introductory books on plasticity have changed very little. To meet the need for an up-to-date introduction to the field, Akhtar S. Khan and Sujian Huang have written Continuum Theory of Plasticity--a truly modern text which offers a continuum mechanics approach as well as a lucid presentation of the essential classical contributions. The early chapters give the reader a review of elementary concepts of plasticity, the necessary background material on continuum mechanics, and a discussion of the classical theory of plasticity. Recent developments in the field are then explored in sections on the Mroz Multisurface model, the Dafalias and Popov Two Surface model, the non-linear kinematic hardening model, the endochronic theory of plasticity, and numerous topics in finite deformation plasticity theory and strain space formulation for plastic deformation. Final chapters introduce the fundamentals of the micromechanics of plastic deformation and the analytical coupling between deformation of individual crystals and macroscopic material response of the polycrystal aggregate. For graduate students and researchers in engineering mechanics, mechanical, civil, and aerospace engineering, Continuum Theory of Plasticity offers a modern, comprehensive introduction to the entire subject of plasticity.
Download or read book Theory of Elasticity written by A.I. Lurie and published by Springer Science & Business Media. This book was released on 2010-05-30 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classical theory of elasticity maintains a place of honour in the science ofthe behaviour ofsolids. Its basic definitions are general for all branches of this science, whilst the methods forstating and solving these problems serve as examples of its application. The theories of plasticity, creep, viscoelas ticity, and failure of solids do not adequately encompass the significance of the methods of the theory of elasticity for substantiating approaches for the calculation of stresses in structures and machines. These approaches constitute essential contributions in the sciences of material resistance and structural mechanics. The first two chapters form Part I of this book and are devoted to the basic definitions ofcontinuum mechanics; namely stress tensors (Chapter 1) and strain tensors (Chapter 2). The necessity to distinguish between initial and actual states in the nonlinear theory does not allow one to be content with considering a single strain measure. For this reason, it is expedient to introduce more rigorous tensors to describe the stress-strain state. These are considered in Section 1.3 for which the study of Sections 2.3-2.5 should precede. The mastering of the content of these sections can be postponed until the nonlinear theory is studied in Chapters 8 and 9.
