Download or read book Fundamental Study of the Machinability of Carbon Nanotube Reinforced Polymer Composites written by Johnson Samuel and published by . This book was released on 2009 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective manufacturing of micro/meso-scale parts and products using carbon nanotube (CNT) composites requires a knowledge base that will enable the design of these composites to meet both the micro-scale engineering and manufacturing requirements. This research has sought to understand the effect of CNTs on the machining performance of CNT composites and to identify critical microstructural parameters that influence their machinability.
Download or read book Carbon Nanotube Polymer Composites written by Brian P. Grady and published by John Wiley & Sons. This book was released on 2011-07-08 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accessible compendium of polymers in carbon nanotubes (CNTs) Carbon nanotubes (CNTs)—extremely thin tubes only a few nanometers in diameter but able to attain lengths thousands of times greater—are prime candidates for use in the development of polymer composite materials. Bringing together thousands of disparate research works, Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications covers CNT-polymers from synthesis to potential applications, presenting the basic science and engineering of this dynamic and complex area in an accessible, readable way. Designed to be of use to polymer scientists, engineers, chemists, physicists, and materials scientists, the book covers carbon nanotube fundamentals to help polymer experts understand CNTs, and polymer physics to help those in the CNT field, making it an invaluable resource for anyone working with CNT-polymer composites. Detailed chapters describe the mechanical, rheological, electrical, and thermal properties of carbon nanotube-polymer composites. Including a glossary that defines key terms, Carbon Nanotube-Polymer Composites is essential reading for anyone looking to gain a fundamental understanding of CNTs and polymers, as well as potential and current applications, including electronics (shielding and transparent electrodes), flame retardants, and electromechanics (sensors and actuators), and their challenges.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Carbon Nanotube Reinforced Composites written by Marcio Loos and published by Elsevier. This book was released on 2014-09-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Reinforced Composites introduces a wide audience of engineers, scientists and product designers to this important and rapidly expanding class of high performance composites. Dr Loos provides readers with the scientific fundamentals of carbon nanotubes (CNTs), CNT composites and nanotechnology in a way which will enable them to understand the performance, capability and potential of the materials under discussion. He also investigates how CNT reinforcement can be used to enhance the mechanical, electrical and thermal properties of polymer composites. Production methods, processing technologies and applications are fully examined, with reference to relevant patents. Finally, health and safety issues related to the use of CNTs are investigated. Dr. Loos compares the theoretical expectations of using CNTs to the results obtained in labs, and explains the reasons for the discrepancy between theoretical and experimental results. This approach makes the book an essential reference and practical guide for engineers and product developers working with reinforced polymers – as well as researchers and students in polymer science, materials and nanotechnology. A wealth of applications information is included, taken from the wide range of industry sectors utilizing CNT reinforced composites, such as energy, coatings, defense, electronics, medical devices, and high performance sports equipment. - Introduces a wide range of readers involved in plastics engineering, product design and manufacturing to the relevant topics in nano-science, nanotechnology, nanotubes and composites. - Assesses effects of CNTs as reinforcing agents, both in a materials context and an applications setting. - Focuses on applications aspects – performance, cost, health and safety, etc – for a wide range of industry sectors, e.g. energy, coatings, defense, electronics, medical devices, high performance sports equipment, etc.
Download or read book Carbon Nanotubes for Polymer Reinforcement written by Peng-Cheng Ma and published by CRC Press. This book was released on 2011-03-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in the twentieth century, carbon nanotubes (CNT) were an integral part of science and industry by the beginning of the twenty first century, revolutionizing chemistry, physics, and materials science. More recent advances in carbon nanotube production methods have resulted in a tremendous push to incorporate CNTs into polymer matrices. Al
Download or read book Polymer Carbon Nanotube Composites written by Tony McNally and published by Elsevier. This book was released on 2011-03-28 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of polymer carbon nanotube (CNT) composites is the key to these materials finding new applications in a wide range of industries, including but not limited to electronics, aerospace and biomedical/bioengineering. Polymer-carbon nanotube composites provides comprehensive and in-depth coverage of the preparation, characterisation, properties and applications of these technologically interesting new materials.Part one covers the preparation and processing of composites of thermoplastics with CNTs, with chapters covering in-situ polymerization, melt processing and CNT surface treatment, as well as elastomer and thermoset CNT composites. Part two concentrates on properties and characterization, including chapters on the quantification of CNT dispersion using microscopy techniques, and on topics as diverse as thermal degradation of polymer/CNT composites, the use of rheology, Raman spectroscopy and multi-scale modelling to study polymer/CNT composites, and CNT toxicity. In part three, the applications of polymer/CNT composites are reviewed, with chapters on specific applications such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing.With its distinguished editors and international team of contributors, Polymer-carbon nanotube composites is an essential reference for scientists, engineers and designers in high-tech industry and academia with an interest in polymer nanotechnology and nanocomposites. - Provides comprehensive and in-depth coverage of the preparation, characterisation and properties of these technologically interesting new materials - Reviews the preparation and processing of composites of thermoplastics with CNTs, covering in-situ polymerization, melt processing and CNT surface treatment - Explores applications of polymer/CNT composites such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing
Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.
Download or read book Development of an Enhanced Microstructure level Machining Model for Carbon Nanotube Reinforced Polymer Composites Using Cohesive Zone Interface written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book A Microstructure level Finite Element based Model for Simulation of Machining of Carbon Nanotube Reinforced Polymer Composites written by Ashutosh Dikshit and published by . This book was released on 2007 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Based Composites written by Antonio Pantano and published by Smithers Rapra. This book was released on 2012-09-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on carbon nanotube based composites and a reference to students and researchers from the academia and industry.
Download or read book Mechanical Characteristics of Continuous Carbon Nanotube and Continuously Reinforced Carbon Nanotube Composite written by Yupeng Li and published by . This book was released on 2016 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the outstanding mechanical, thermal and electronic properties of carbon nanotubes (CNTs), CNT and CNT reinforced polymer composite are becoming more and more pervasive in engineering applications, especially in energy absorbing and damping materials. Therefore, the underlying mechanism of the intriguing mechanical properties of CNT arrays and CNT reinforced composites is an essential and fundamental science for the potential applications of CNT related materials. It is fundamental and critical to investigate the mechanical properties of CNTs first, since the intrinsic properties and collective behavior of CNTs play an important role in the mechanical response of composite. The buckling behavior of vertically aligned carbon nanotubes (VACNT) was investigated. By taking van der Waals interactions into account, both experiments and modeling results confirm that VACNTs buckle in the bottom region with a high mode buckling, following wave damping effect. Then, the compressive behavior of VACNTs was quantified by strain energy density function. The effects of CNT structure/morphology, including diameter, cross section area, moment of inertia, defect degree and density, on mechanical properties were statistically investigated and compared with cellular materials, showing significant influence on determining the mechanical properties of VACNTs. The focus of CNT polymer composites is on the application-oriented viscoelastic properties. The static viscoelastic characterization was conducted by creep and stress relaxation tests with stress/strain variation and quantified by nonlinear power-law model. The dynamic properties were characterized by dynamic mechanical analysis (DMA) with frequency variation. And CNTs show significant enhancement in elastic response and considerable influence on viscous response. In addition, the temperature effects were investigated and composites show better thermal stability. By using timetemperature superposition (TTS) and Williams–Landel–Ferry (WLF) fitting, the prediction scale of viscoelastic behavior in time/frequency range can be significant enlarged. The viscoelastic responses are complicated by the intrinsic anisotropy of CNTs, so it is also essential to study their anisotropic properties. The compressive and viscoelastic characterization were performed on longitudinal, transverse and random composites and compared with PDMS. The results confirm the exceptional reinforcement of CNTs in longitudinal composites, which have lateral support from polymer matrix. And the increased damping effects of composites can be explained by the interfacial sliding and the energy dissipation between nanotubes and polymer matrix. Furthermore, the fatigue tests of CNT polymer composites were performed to investigate mechanical robustness and long-term stability. From the stress-number of cycles (S-N) data in cyclic DMA tests, CNTs improved the fatigue life of composites considerably, especially in high-cycle fatigue strength, caused by the hindering of crack propagation from CNTs, the interface debonding and the CNT reinforcement effects. Also, the microscopy images of fracture surfaces indicate different fatigue resistance and different fracture/crack mechanism between longitudinal and transverse composites.
Download or read book Carbon Nanotubes written by Arvind Agarwal and published by CRC Press. This book was released on 2017-06-20 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Foreword, written by legendary nano pioneer M. Meyyappan, Chief Scientist for Exploration Technology NASA Ames Research Center, Moffett Field, California, USA: ..".there is critical need for a book to summarize the status of the field but more importantly to lay out the principles behind the technology. This is what Professor Arvind Agarwal and his co-workers ... have done here." Carbon Nanotubes: Reinforced Metal Matrix Composites reflects the authors' desire to share the benefits of nanotechnology with the masses by developing metal matrix carbon nanotube (MM-CNT) composites for large-scale applications. Multiwall carbon nanotubes can now be produced on a large scale and at a significantly reduced cost. The book explores potential applications and applies the author's own research to highlight critical developmental issues for different MM-CNT composites--and then outline novel solutions. With this problem-solving approach, the book explores: Advantages, limitations, and the evolution of processing techniques used for MM-CNT composites Characterization techniques unique to the study of MM-CNT composites--and the limitations of these methods Existing research on different MM-CNT composites, presented in useful tables that include composition, processing method, quality of CNT dispersion, and properties The micro-mechanical strengthening that results from adding CNT The applicability of micro-mechanics models in MM-CNT composites Significance of chemical stability for carbon nanotubes in the metal matrix as a function of processing, and its impact on CNT/metal interface and mechanical properties Computational studies that have not been sufficiently covered although they are essential to research and development The critical issue of CNT dispersion in the metal matrix, as well as a unique way to quantify CNT distribution and subsequently improve control of the processing parameters for obtaining improved properties Carbon Nanotubes: Reinforced Metal Matrix Composites paints a vivid picture of scientific and application achievements in this field. Exploring the mechanisms through which CNTs are enhancing the properties of different metal-based composites, the authors provide a roadmap to help researchers develop MM-CNT composites and choose potential materials for use in emerging areas of technology.
Download or read book Carbon Nanotube Reinforced Composites written by Sie Chin Tjong and published by John Wiley & Sons. This book was released on 2009-04-08 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a broad insight into the potential applications of carbon nanotubes with metals and ceramic materials as a matrix, this book focuses on the preparation and the microstructural, physical, and mechanical characterizations of such novel nanocomposites. It features information on current synthesis and structure-property-relationships of metals and ceramics reinforced with CNT, organizing the vast array of surveys scattered throughout the literature in a single monograph. With its laboratory protocols and data tables this is invaluable reading for research workers and academics, as well as for applied scientists and industry personnel.
Download or read book Fiber Reinforced Nanocomposites Fundamentals and Applications written by Baoguo Han and published by Elsevier. This book was released on 2020-03-13 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced Nanocomposites: Fundamentals and Applications explores the fundamental concepts and emerging applications of fiber-reinforced nanocomposites in the automobile, aerospace, transportation, construction, sporting goods, optics, electronics, acoustics and environmental sector. In addition, the book provides a detailed overview of the properties of fiber-reinforced nanocomposites, including discussion on embedding these high-strength fibers in matrices. Due to the mismatch in structure, density, strain and thermal expansion coefficients between matrix and fibers, their thermo-mechanical properties strongly depend not only on the preparative methods, but also on the interaction between reinforcing phase and matrix phase. This book offers a concise overview of these advances and how they are leading to the creation of stronger, more durable classes of nanocomposite materials. - Explores the interaction between fiber, nanoreinforcers and matrices at the nanoscale - Shows how the properties of fiber-enforced nanocomposites are ideal for use for a variety of consumer products - Outlines the major challenges to creating fiber-reinforced nanocomposites effectively
Download or read book Carbon Nanotubes written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2011-08-17 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are a class of material with a great deal of promise for potential applications in various industries ranging from construction to aerospace. The main difference between polymeric nanocomposites and conventional composites is the filler that is being used for reinforcement. In the nanocomposites the reinforcement is on the order of nanometer that leads to a very different final macroscopic property. Due to this unique feature polymeric nanocomposites have been studied exclusively in the last decade using various nanofillers such as minerals, sheets or fibers. This books focuses on the preparation and property analysis of polymer nanocomposites with CNTs (fibers) as nano fillers. The book has been divided into three sections. The first section deals with fabrication and property analysis of new carbon nanotube structures. The second section deals with preparation and characterization of polymer composites with CNTs followed by the various applications of polymers with CNTs in the third section.
Download or read book Fundamentals on Manufacturing and Quality Control of Carbon Nanotube Reinforced Composites written by Julian Richter and published by . This book was released on 2010 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
