Download or read book Functionalizing Graphene and Carbon Nanotubes written by Filipe Vargas Ferreira and published by Springer. This book was released on 2016-08-22 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles all current information on the different types of functionalization of carbon nanotubes (CNTs) and graphene, both covalent and non-covalent. The book starts with a general overview of the synthesis, characterization and application of functionalized CNTs and graphene. Special attention is dedicated to the characterization of functionalized materials, a topic rarely addressed on the literature. The authors provide a comparison between the functionalization of these two types of carbon materials.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. - Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery - Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines - High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Functionalization of Graphene written by Vasilios Georgakilas and published by John Wiley & Sons. This book was released on 2014-04-03 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: All set to become the standard reference on the topic, this book covers the most important procedures for chemical functionalization, making it an indispensable resource for all chemists, physicists, materials scientists and engineers entering or already working in the field. Expert authors share their knowledge on a wide range of different functional groups, including organic functional groups, hydrogen, halogen, nanoparticles and polymers.
Download or read book Emerging Applications of Carbon Nanotubes and Graphene written by Bhanu Pratap Singh and published by CRC Press. This book was released on 2023-02-27 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews recent and emerging applications of carbon nanotubes and graphene materials in a wide range of sectors. Detailed applications include structural materials, ballistic materials, energy storage and conversion, batteries, supercapacitors, smart sensors, environmental protection, nanoelectronics, optoelectronic and photovoltaics, thermoelectric, and conducting wires. It further covers human and structural health monitoring, and thermal management applications. Key selling features: Exclusively takes an application-oriented approach to cover emerging areas in carbon nanotubes and graphene Covers fundamental and applied knowledge related to carbon nanomaterials Includes advanced applications like human and structural health monitoring, smart sensors, ballistic protection and so forth Discusses novel applications such as thermoelectrics along with environmental protection related application Explores aspects of energy storage, generation and conversion including batteries, supercapacitors, and photovoltaics This book is aimed at graduate students and researchers in electrical, nanomaterials, chemistry, and other related areas.
Download or read book Properties and Functionalization of Graphene written by Dinadayalane Tandabany and published by Elsevier. This book was released on 2022-05-10 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties and Functionalization of Graphene: Computational Chemistry Approaches, Volume 21 shows how computational chemistry can be used to explore molecular interactions when modeling and manipulating graphene's properties for varied applications. Sections compare results and experimental evidence, cover the experimental techniques employed in the functionalization of graphene and associated challenges, and delve into the properties of functionalized graphene. Under the guidance of its expert editor, this book shares insights from a global team of specialists, making it an authoritative, practical guide for all those studying, developing or applying graphene across a whole range of fields. - Provides practical insights into the latest computational approaches used in modeling the properties of functionalized graphene - Includes detailed methods and step-by-step guidance on key processes that are supported throughout with examples - Highlights the electronic properties of functionalized graphene
Download or read book Polymer Composites with Functionalized Nanoparticles written by Krzysztof Pielichowski and published by Woodhead Publishing. This book was released on 2018-09-22 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Composites with Functional Nanoparticles: Synthesis, Properties, and Applications reviews the latest research in the area of polymer nanocomposites and functionalized nanoparticles, providing an introduction for those new to the field, and supporting further research and development. The book helps researchers and practitioners better understand the key role of nanoparticle functionalization for improving the compatibility of inorganic metallic nanomaterials with organic polymers, and for the fabrication of nanostructured materials with special properties. A range of nanoparticles, such as carbon nanotubes are covered, along with descriptions of the methods of functionalization to support better compatibility with polymer matrices. The book also discusses the various applications of this technology, including uses in electronics and the medical and energy industries. - Summarizes the latest research in functionalized nanoparticles for modification of polymer matrices, providing a valuable platform for further research - Includes functionalization of a range of nanoparticles for incorporation into nanocomposites, including carbon nanotubes, graphene, gold and silver, silica and clay - Provides detailed coverage of application areas, including energy, electronics, biomedical applications, and end-of-life considerations
Download or read book Functionalized Graphene Nanocomposites and Their Derivatives written by Mohammad Jawaid and published by Elsevier. This book was released on 2018-11-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized Graphene Nanocomposites and Their Derivatives: Synthesis, Processing and Applications explains how the functionalization technique is used to create graphene nanocomposites, also exploring its current uses in industrial applications. Graphene-based nanocomposites are one of the major advancements in polymer-based materials, thus the synthesis, nanoscale dimensions, high aspect ratio, mechanical, electrical and thermal properties of graphene and its derivative have all been major areas of research in the last decade. This important reference covers these updates and is a critical book for those working in the fields of materials processing and characterization. - Explains how graphene is functionalized and used in the fabrication of nanocomposites for a range of applications - Explores why the properties of functionalized graphene make it such a useful, versatile material - Describes, in detail, the functionalization process for utilization in graphene
Download or read book Progress on Sanitation and Drinking Water 2015 Update and MDG Assessment written by and published by World Health Organization. This book was released on 2015-10-02 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite significant progress in water and sanitation much still remains to be done. This report shows how the world has changed since 1990. It provides an assessment of progress towards the MDG target and insight into the remaining challenges. Section A provides an overview of progress against the parameters specified in the MDG target for water and sanitation in both urban and rural areas. It presents data for the world as a whole and compares progress across regions. The report goes on to examine trends over the MDG period by region and by level of service. It pays particular attention to the numbers of people who have gained the highest level of service in drinking water supply - piped water on premises - and those with no service at all who use surface water for drinking and practice open defecation. In order to understand the nature of progress it is important to look carefully at the way improvements in water and sanitation have benefited different socioeconomic groups. This report sheds light on equality gaps between urban and rural dwellers and between the richest and poorest segments of the population. It presents several new ways to visualize progress on extending service to the poor designed to reveal the nature of inequalities and give the reader insight into the great challenge that still exists in ensuring that progress reaches everyone. The JMP was established in 1990 and is celebrating its Jubilee Year in 2015. Section B provides a retrospective analysis of the evolution of water sanitation and hygiene monitoring over the past 25 years.
Download or read book Applications of Graphene and Graphene Oxide based Nanomaterials written by Sekhar Ray and published by William Andrew. This book was released on 2015-02-12 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanomaterials have a unique place in Nanoscience owing to their exceptional electrical, thermal, chemical and mechanical properties and have found application in areas as diverse as composite materials, energy storage and conversion, sensors, drug delivery, field emission devices and nano-scale electronic components. Conjugated carbon nanomaterial covers the areas of carbon nanotubes, fullerenes and graphene. Graphene is the newest of the carbon nanomaterials and promises to be a very active field. Already since its isolation in 2004 it has grabbed the attention of the chemistry, materials and physics communities. It promises to rival carbon nanotubes in terms of properties and potential applications with the number of publications rising from ca. 130 in 2005 to ca. 2,800 in 2010. In this short book Sekhar Ray gives an overview on graphene and graphene-oxide with a strong focus on applications. Structured in three chapters, one on graphene, one on graphene-oxide and one on graphene based nanoparticles his resource describes in each chapter the preparation (including synthesis and functionalization) and material properties before detailing a whole range of applications. Ray finishes each chapter with information on remaining challenges and perspectives. - Written by an expert in the field who, during his last 17 years of research, has published more than 80 peer reviewed articles in recognized international journals - Gives full-chapter overviews on Graphene, Graphene-Oxide, and Graphene based nanoparticles - Focusses on applications
Download or read book Carbon Nanotubes and Related Structures written by Dirk M. Guldi and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the most prominent experts and pioneers in the field, this ready reference combines fundamental research, recent breakthroughs and real-life applications in one well-organized treatise. As such, both newcomers and established researchers will find here a wide range of current methods for producing and characterizing carbon nanotubes using imaging as well as spectroscopic techniques. One major part of this thorough overview is devoted to the controlled chemical functionalization of carbon nanotubes, covering intriguing applications in photovoltaics, organic electronics and materials design. The latest research on novel carbon-derived structures, such as graphene, nanoonions and carbon pea pods, round off the book.
Download or read book Chemical Functionalization of Carbon Nanomaterials written by Vijay Kumar Thakur and published by CRC Press. This book was released on 2015-07-28 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-based nanomaterials are rapidly emerging as one of the most fascinating materials in the twenty-first century. Chemical Functionalization of Carbon Nanomaterials: Chemistry and Applications provides a thorough examination of carbon nanomaterials, including their variants and how they can be chemically functionalized. It also gives a comprehe
Download or read book Advances in Graphene Science written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-07-31 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is proving to be the magic material of the 21th century. It is widely accepted that it is the strongest material ever studied and can be an efficient substitute for silicon. Besides, fascinating properties of graphene, such as the highest electrical conductivity among the discovered substances, have dramatically shocked science and technology world. Graphene is a carbon based layer with high atomic density. Its extraordinary characteristics such as extremely high mechanical strength, hardness, and adjustable thermal and electrical conductivity, as well as excellent surface and optical feature through chemical marking, have received great deal of attention by many researchers. This book collects new advances of this interesting nanomaterial.
Download or read book Advanced Carbon Materials and Technology written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of carbon materials is multidisciplinary and is related to physics, chemistry, biology, applied sciences and engineering. The research on carbon materials has mostly focused on aspects of fundamental physics as they unique electrical, thermal and mechanical properties applicable for the range of applications. The electrons in graphene and other derived carbon materials behave as dirac fermions due to their interaction with the ions of the lattice. This direction has led to the discovery of new phenomena such as Klein tunneling in carbon based solid state systems and the so-called half-integer quantum Hall effect. Advanced Carbon Materials and Technology presents cutting-edge chapters on the processing, properties and technological developments of graphene, carbon nanotubes, carbon fibers, carbon particles and other carbon based structures including multifunctional graphene sheets, graphene quantum dots, bulky balls, carbon balls, and their polymer composites. This book brings together respected international scholars writing on the innovative methodologies and strategies adopted in carbon materials research area including Synthesis, characterization and functionalization of carbon nanotubes and graphene Surface modification of graphene Carbon based nanostructured materials Graphene and carbon nanotube based electrochemical (bio)sensors for environmental monitoring Carbon catalysts for hydrogen storage materials Optical carbon nanoobjects Graphene and carbon nanotube based biosensors Carbon doped cryogel films Bioimpact of carbon nanomaterials Photocatalytic nature of carbon nanotube based composites Engineering behavior of ash fills Fly ash syntactic foams microstructure
Download or read book Functionalized Carbon Nanomaterials for Theranostic Applications written by Shadpour Mallakpour and published by Elsevier. This book was released on 2022-09-17 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized Carbon Nanomaterials for Theranostic Applications offers insights into the developments and trends that are progressing fast in the field of functionalized carbon nanomaterials-based devices as diagnostic tools for early stage detection of human diseases. The book provides information on how functionalized carbon nanomaterials are being used as the basis for products, such as early disease diagnostic kits, quantum dots for medical imaging and a growing list of other applications. Sections cover different mechanical, absorption, optical and electrical properties than those found in original nanomaterials. This is an important reference source that will be valuable to materials scientists, biomedical engineers and pharmaceutical scientists who are looking to increase their understanding on how functionalized carbon nanomaterials are being used for a variety of theranostic applications. - Provides readers with information on how to develop functionalized carbon nanomaterials based diagnostic devices and tools - Identifies fabrication and characterization methods for integrated devices for use in theranostic applications - Assesses major challenges for manufacturing functionalized carbon nanomaterial materials for theranostic devices on an industrial scale
Download or read book Fullerens Graphenes and Nanotubes written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2018-05-28 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fullerens, Graphenes and Nanotubes: A Pharmaceutical Approach shows how carbon nanomaterials are used in the pharmaceutical industry. While there are various books on the carbonaceous nanomaterials available on the market, none approach the subject from a pharmaceutical point-of-view. In this context, the book covers different applications of carbonaceous nanomaterials. Chapters examine different types of carbon nanomaterials and explore how they are used in such areas as cancer treatments, pulse sensing and prosthetics. Readers will find this book to be a valuable reference resource for those working in the areas of carbon materials, nanomaterials and pharmaceutical science. - Explains how the unique properties of carbon-based nanomaterials allow them to be used to create effective drug delivery systems - Covers how carbon-based nanomaterials should be prepared for use in pharmaceutical applications - Discusses the relative toxicity of a range of carbon-based nanomaterials - Considers the safety of their use in different types of drugs
Download or read book Carbon nanotubes and graphene for photonic applications written by B.A. Baker and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes have been explored in light-harvesting and photovoltaic devices because of their unique optoelectronic properties. This chapter provides a brief description of the optoelectronic properties of carbon nanotubes, particularly single-wall carbon nanotubes (SWCNTs), and their implication in various solar cell applications including donor–acceptor solar cells, polymer solar cells, and dye-sensitized solar cells, where carbon nanotubes are utilized as photoactive materials. Carbon-nanotube-based electrodes in photovoltaic devices are also introduced. Carbon-nanotube-based light-harvesting devices are reviewed in terms of fabrication and material processing as well as performance. Finally, advanced emerging methods and the future outlook for carbon-nanotube-based solar cells are discussed.
Download or read book Carbon Composites written by Eduardo A. Castro and published by CRC Press. This book was released on 2023-06-02 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume demonstrates the unique place in nanotechnology and nanoscience that carbon nanomaterials occupy owing to their exceptional chemical, mechanical, thermal, and electrical properties. Carbon nanomaterials have diverse applications in super strong composite materials, smart sensors, energy storage and conversion, super-capacitors, and more. Focusing on materials rather than mechanics, this volume discusses the key roles of materials science and engineering in the development of composite materials. The result of research by many highly qualified experts in the field of experimental and theoretical research on graphene and its derivatives, the volume describes experimental methods for obtaining and characterizing samples of chemically modified graphene. It reviews the potential application areas and modifications of graphene-based composite materials and interprets the interesting physical effects discovered for the first time for graphene materials under consideration. This book covers the innovative methodologies and strategies adopted in carbon materials research area including: Synthesis, characterization, and functionalization of carbon nanotubes and graphene Surface modification of graphene Carbon-based nanostructured materials The use of carbon nanomaterials for energy applications Development of carbon nanotubes reinforced metal matrix composites and non-metallic composites and their myriad potential end-use applications Key challenges to the successful and widespread implementation of carbon nanotubes reinforced metal matrix composites and non-metallic composites Methods for quantification and improved control of carbon nanotubes distributions Recent research and design trends for carbon nanomaterials-based sensors for a variety of applications Advances and potential applications in environmental monitoring and healthcare The book will be useful for postgraduate students and researchers as well as for experts in industrial sectors. It will also appeal to those involved in materials science and nanotechnology.
