Download or read book Functional and Structural Micro and Nano Ceramic and Metal Matrix Composites written by Martin Pech-Canul and published by Wiley. This book was released on 2018-12-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal and Ceramic Based Composites written by S.T. Mileiko and published by Elsevier. This book was released on 1997-12-12 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern scientific and technological fields are frequently of an interdisciplinary nature, and the field of fibrous composites is no exception. Unlike fibre-reinforced plastics, the family of metal- and ceramic-based composites is still quite a new group of materials with a large variety of mechanical and physical properties. Up until now it has been difficult to produce these materials as the necessary technical information has not been well documented. The main purpose of this book is to link together fabrication, structure and properties chains, so as to clarify which structure provides the necessary properties, and how one can attain the correct composite structure. To this end, the book not only contains topics of a purely technical nature, but also a description of the failure mechanics of metal- and ceramic-matrix composites, as this is the key to understanding the structure-properties segment of the chain mentioned. The book is divided into three parts. Part I presents a general view of composites with the accent on metal- and ceramic-matrix composites. It also contains a brief description of modern fibres and composites and can be considered, at least for beginners, as a starting point for further study. Part II looks at the composite microstructures considered to be either optimal or reasonable in resisting a particular loading. Finally Part II describes a variety of mechanical, physical, and chemical potential for organizing these microstructures. Experimental data on technologies, material structures, and material properties are used throughout the book to support theoretical conclusions or to obtain important physical parameters.

Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications Examines properties of different ceramic nanocomposites, as well as failure mechanisms Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field

Download or read book INNOVATIVE PRODUCTION AND APPLICATION OF STRUCTURAL AND FUNCATIONAL CERAMIC AND METAL MATRIX COMPOSITES written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Graphene Composite Materials written by Cheng Yang and published by World Scientific. This book was released on 2023-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium introduces in detail the basic theory, process methods, property evaluation, research progress, development trend, and basic scientific issues in the combination of graphene and its composite materials in recent years.The useful reference text focuses on four categories of graphene composite materials based on the matrix materials, metal, resin, rubber composites, and composite coatings. The research background, research achievements, and possible applications in the corresponding fields of each section are also reviewed.

Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-11 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Download or read book Mechanics of Composite and Multi functional Materials Volume 5 written by Raman Singh and published by Springer Nature. This book was released on 2019-12-04 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Recycled Constituent Composites Damage Detection Advanced Imaging of Composites Multifunctional Materials Composite Interfaces Tunable Composites

Download or read book Metal Matrix Composites written by Suneev Anil Bansal and published by CRC Press. This book was released on 2022-08-23 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives in-depth coverage of Metal Matrix Composites (MMCs) focusing on micro and nano-reinforcements including hybrid structures, and applications like tribological and corrosion behavior, heat exchanger and so forth. Each chapter covers different perspectives of micro/nano reinforcement and related applications. Major topics covers include new-age reinforcement, fracture, and corrosion behavior, tribological, elastic, elastoplastic, and thermal behavior of MMCs. Features: Presents detailed analysis on new age reinforcements in Metal Matrix Composites (MMCs). Discusses application-based analysis of MMCs. Covers details about convergence of hybrid composite from conventional alloys. Includes mechanisms and effects of various reinforcement on pertinent properties. Reviews properties and applications of various MMCs. This book aims at graduate students, researchers and professionals in micro/nano science & technology, mechanical engineering, industrial engineering, metallurgy, and composites.

Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.

Download or read book Metal Matrix Composites Innovations Advances and Applications written by T. S. Srivatsan and published by Springer. This book was released on 2018-01-15 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes papers on recent research carried out in the field of metal-matrix composites (MMCs). Processing, microstructure, and mechanical properties of MMCs and unreinforced matrix alloys will be covered with a focus on aluminum, titanium, nickel, and copper MMCs. Those involved in the research of MMCs and unreinforced alloys, particularly in aerospace, space, and automotive materials research, will find this volume indispensible.

Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit

Download or read book Recent Advances in Layered Materials and Structures written by Sarmila Sahoo and published by Springer Nature. This book was released on 2021-02-22 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides topical information on innovative, structural and functional materials and composites with applications in various engineering fields covering the structure, properties, manufacturing process, and applications of these materials. It covers various topics in layered structures and layered materials. It discusses the latest developments in the materials engineering field. This book will be useful for academicians, researchers, and practitioners working in the fields of materials engineering, layered structures, and composite materials.

Download or read book Advances in Ceramics for Environmental Functional Structural and Energy Applications II Ceramic Transactions written by Amar S. Bhalla and published by John Wiley & Sons. This book was released on 2019-08-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains a collection of 22 papers presented at the 2018 Materials Science and Technology Meeting (MS&T’18) held in Columbus, Ohio, October 14-18, 2018. Symposia topics included in this volume are: • Advances in Dielectric Materials and Electronic Devices • Innovative Processing and Synthesis of Ceramics, Glasses and Composites • International Symposium on Ceramic Matrix Composites • Materials for Nuclear Applications and Extreme Environments • Nanotechnology for Energy, Environment, Electronics, Healthcare and Industry • Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work – Rustum Roy Symposium • Additive Manufacturing of Composites and Complex Materials • Eco-Friendly and Sustainable Ceramics

Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.

Download or read book Nanoengineering of Structural Functional and Smart Materials written by Mark J. Schulz and published by CRC Press. This book was released on 2005-08-29 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: In chapters contributed by 24 university & government laboratories, Nanoengineering of Structural, Functional, and Smart Materials combines wide-ranging research aimed at the development of multifunctional materials that are strong, lightweight, and versatile. This book explores promising and diverse approaches to the design of nanoscale

Download or read book Polymer Matrix Composite Materials written by Debdatta Ratna and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-11-20 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides accessible and comprehensive information on polymer matrix composites. It presents the basic concept of design of composite materials. It includes chapters on materials testing and characterization, such as mechanical testing and thermal analysis, and lifetime prediction. It discusses both structural and functional applications. Offers comprehensive information on processing, properties and applications polymer matrix composites Presents and reviews the recent development in the field e.g. damage tolerant composites, biocomposites, additive manufacturing Includes latest techniques of performance evaluation and life time assessment of composite materials

Download or read book Composites and Their Properties written by Ning Hu and published by BoD – Books on Demand. This book was released on 2012-08-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are a class of material, which receives much attention not only because it is on the cutting edge of active material research fields due to appearance of many new types of composites, e.g., nanocomposites and bio-medical composites, but also because there are a great deal of promises for their potential applications in various industries ranging from aerospace to construction due to their various outstanding properties. This book mainly deals with fabrication and property characterization of various composites by focusing on the following topics: functional and structural nanocomposites, numerical and theoretical modelling of various damages in long fiber reinforced composites and textile composites, design, processing and manufacturing technologies and their effects on mechanical properties of composites, characterization of mechanical and physical properties of various composites, and metal and ceramic matrix composites. This book has been divided into five sections to cover the above contents.