Download or read book Fugitive Dust Control Technology written by and published by . This book was released on 1983 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainability Guidelines for the Structural Engineer written by Structural Engineering Institute. Sustainability Committee and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sustainability Committee of the American Society of Civil Engineer s Structural Engineering Institute (ASCE SEI) prepared these guidelines to advance the understanding of sustainability in the structural community and to incorporate concepts of sustainability into structural engineering standards and practices. This book will educate and guide structural engineers as they meet the challenge to design and construct a sustainable built environment. The guidelines are organized into five sections: Sustainable Design and Construction, Sustainable Strategies, Building Materials, Infrastructure, and Case Studies. Although many of the subjects presented are related, each section and the related subsections have been written to stand alone, allowing this report to be used as a practical reference. This report was written for structural engineers, but related disciplines will also benefit from the contents. The book includes an important section on infrastructure because, many of the concepts and ideas presented in this guide relate to infrastructure, as well as design and construction.

Download or read book Dust Control Handbook for Industrial Minerals Mining and Processing written by Andrew B. Andrew B. Cecala and published by CreateSpace. This book was released on 2015-05-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the mining and processing of minerals, the mined ore undergoes a number of crushing, grinding, cleaning, drying, and product sizing operations as it is processed into a marketable commodity. These operations are highly mechanized, and both individually and collectively these processes can generate large amounts of dust. If control technologies are inadequate, hazardous levels of respirable dust may be liberated into the work environment, potentially exposing workers. Accordingly, federal regulations are in place to limit the respirable dust exposure of mine workers. Engineering controls are implemented in mining operations in an effort to reduce dust generation and limit worker exposure.

Download or read book Environmental Pollution and Control written by J. Jeffrey Peirce and published by Butterworth-Heinemann. This book was released on 1998-01-15 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex environmental problems are often reduced to an inappropriate level of simplicity. While this book does not seek to present a comprehensive scientific and technical coverage of all aspects of the subject matter, it makes the issues, ideas, and language of environmental engineering accessible and understandable to the nontechnical reader.Improvements introduced in the fourth edition include a complete rewrite of the chapters dealing with risk assessment and ethics, the introduction of new theories of radiation damage, inclusion of environmental disasters like Chernobyl and Bhopal, and general updating of all the content, specifically that on radioactive waste.Since this book was first published in 1972, several generations of students have become environmentally aware and conscious of their responsibilities to the planet earth. Many of these environmental pioneers are now teaching in colleges and universities, and have in their classes students with the same sense of dedication and resolve that they themselves brought to the discipline. In those days, it was sometimes difficult to explain what indeed environmental science or engineering was, and why the development of these fields was so important to the future of the earth and to human civilization. Today there is no question that the human species has the capability of destroying its collective home, and that we have indeed taken major steps toward doing exactly that.And yet, while, a lot has changed in a generation, much has not. We still have air pollution; we still contaminate our water supplies; we still dispose of hazardous materials improperly; we still destroy natural habitats as if no other species mattered. And worst of all, we still continue to populate the earth at an alarming rate. There is still a need for this book, and for the college and university courses that use it as a text, and perhaps this need is more acute now than it was several decades ago. Although the battle to preserve the environment is still raging, some of the rules have changed. We now must take into account risk to humans, and be able to manipulate concepts of risk management. With increasing population, and fewer alternatives to waste disposal, this problem is intensified. Environmental laws have changed, and will no doubt continue to evolve. Attitudes toward the environment are often couched in what has become known as the environmental ethic. Finally, the environmental movement has become powerful politically, and environmentalism can be made to serve a political agenda.In revising this book, we have attempted to incorporate the evolving nature of environmental sciences and engineering by adding chapters as necessary and eliminating material that is less germane to today's students. We have nevertheless maintained the essential feature of this book -- to package the more important aspects of environmental engineering science and technology in an organized manner and present this mainly technical material to a nonengineering audience.This book has been used as a text in courses which require no prerequisites, although a high school knowledge of chemistry is important. A knowledge of college level algebra is also useful, but calculus is not required for the understanding of the technical and scientific concepts.We do not intend for this book to be scientifically and technically complete. In fact, many complex environmental problems have been simplified to the threshold of pain for many engineers and scientists. Our objective, however, is not to impress nontechnical students with the rigors and complexities of pollution control technology but rather to make some of the language and ideas of environmental engineering and science more understandable.

Download or read book Control Techniques for Particulate Emissions from Stationary Sources written by and published by . This book was released on 1982 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dust Control for Haul Roads written by and published by . This book was released on 1981 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Dust Suppression Technology and Its Applications in Mines Open pit Mines written by Yuan Wang and published by Springer Nature. This book was released on 2022-01-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the study of chemical dust suppression in mine dust pollution control by means of theories, experiments, computer simulation, and case application, aiming at providing chemical dust suppression solutions for mining worksites. It has seven chapters, including the following contents: (1) introduces fundamental theories and applications of chemical dust suppression, analyzes the dust source intensity of worksites and the mechanisms of dust generation, and summarizes the dust control measures for different mining worksites. (2) According to the mechanisms of dust generation in different mining worksites, targeted dust suppressants were developed. Through optimization by monomer experiment and orthogonal experiment, the optimum formula of different types of dust suppressants was obtained, and its properties were characterized. (3) The dust suppressant field application process was introduced, and the economic benefits were analyzed. This book is expected to provide valuable references both for researchers and engineering technicians engaged in environmental engineering, safety engineering, occupational health, and mining metallurgical engineering, and it also serves as a textbook for graduate students in above disciplines.

Download or read book Industrial Air Quality and Ventilation written by Ivan Nikolayevich Logachev and published by CRC Press. This book was released on 2014-02-20 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of industrial ventilation and air quality, a lack of adequate analysis for aerodynamic processes, as well as a shortage of properly equipped computer facilities, has forced specialists to rely on an empirical approach to find answers in the past. Commonly based on crude models, practical data, or countertypes, the answers often offered

Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book Gauging control technology and regulatory impacts in occupational safety and health an appraisal of OSHA s analytic approach written by and published by DIANE Publishing. This book was released on with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EPA 600 2 written by and published by . This book was released on 1972 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reclamation of Mine impacted Land for Ecosystem Recovery written by Nimisha Tripathi and published by John Wiley & Sons. This book was released on 2016-02-04 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mining activities significantly impact the environment; they generate huge quantities of spoil, promote deforestation and the loss of agricultural production, as well as releasing contaminants that result in the loss of valuable soil resources. These negative impacts are now being recognized and this book shows how corrective action can be taken. The introduction of sustainable mining requires mitigation strategies that start during the mine planning stage and extend to after mineral extraction has ceased, and post-closure activities are being executed. Reclamation of Mine-impacted Land for Ecosystem Recovery covers: methods of rejuvenation of mine wasteland including different practices of physical, chemical and ecological engineering methods; benefits of rejuvenation: stabilization of land surfaces; pollution control; aesthetic improvement; general amenity; plant productivity; and carbon sequestration as well as restoring biodiversity and ecosystem function; best management practices and feasible solutions to the impacts of mining which will reduce the pollution load by reducing the discharge rate and the pollutant concentration; reduce erosion and sedimentation problems, and result in improved abandoned mine lands; and ecosystem development. The authors explain how mining impacts on soil properties and how soil carbon reserves/soil fertility can be restored when mining has ceased. Restoration involves a coordinated approach that recognizes the importance of key soil properties to enable re-vegetation to take place rapidly and ecosystems to be established in a low cost and sustainable way. This book’s unique combination of the methods for reclamation technologies with policies and best practice worldwide will provide the background and the guidance needed by scientists, researchers and engineers engaged in land reclamation, as well as by industry managers.

Download or read book Permanent Regulatory Program Implementing Section 501 b of the Surface Mining Control and Reclamation Act of 1977 written by and published by . This book was released on 1979 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Federal Register written by and published by . This book was released on 2012-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EPA Environmental Engineering Sourcebook written by J. Russell Boulding and published by Routledge. This book was released on 2019-03-04 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Environmental Protection Agency (U.S. EPA) publishes several series of documents that provide up-to-date information about environmental site assessment and remediation. The EPA Environmental Engineering Sourcebook includes papers and bulletins that focus on remediation of soil and groundwater, making them available in a convenient form. This book compiles thirty-five documents- written by recognized leaders - on major methods and promising new techniques for hazardous waste treatment and site remediation. Each chapter evaluates the type of contaminant and site characteristics needed to select a technology for use at hazardous waste sites. The EPA Environmental Engineering Sourcebook presents EPA documents in an easy-to-use, concise format. It contains numerous graphs, charts and figures that make it an important resource for those involved in environmental protection, site remediation, and site assessment. Features Contains chapters written by recognized leaders Examines major methods as well as assesses new techniques for hazardous waste treatment and site remediation Presents information in an easy-to-use, concise format Evaluates each type of contaminant and site characteristics for selecting technology at hazardous waste sites

Download or read book Pollution Control Handbook for Oil and Gas Engineering written by Nicholas P. Cheremisinoff and published by John Wiley & Sons. This book was released on 2016-04-20 with total page 1408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a major new handbook that covers hundreds of subjects that cross numerous industry sectors; however, the handbook is heavily slanted to oil and gas environmental management, control and pollution prevention and energy efficient practices. Multi-media pollution technologies are covered : air, water, solid waste, energy. Students, technicians, practicing engineers, environmental engineers, environmental managers, chemical engineers, petroleum engineers, and environmental attorneys are all professionals who will benefit from this major new reference source. The handbook is organized in three parts. Part A provides an extensive compilation of abbreviations and concise glossary of pollution control and engineering terminology. More than 400 terms are defined. The section is intended to provide a simple look-up guide to confusing terminology used in the regulatory field, as well as industry jargon. Cross referencing between related definitions and acronyms are provided to assist the user. Part B provides physical properties and chemical safety information. This part is not intended to be exhaustive; however it does provide supplemental information that is useful to a number of the subject entries covered in the main body of the handbook. Part C is the Macropedia of Subjects. The part is organized as alphabetical subject entries for a wide range of pollution controls, technologies, pollution prevention practices and tools, computational methods for preparing emission estimates and emission inventories and much more. More than 100 articles have been prepared by the author, providing a concise overview of each subject, supplemented by sample calculation methods and examples where appropriate, and references. Subjects included are organized and presented in a macropedia format to assist a user in gaining an overview of the subject, guidance on performing certain calculations or estimates as in cases pertinent to preliminary sizing and selection of pollution controls or in preparing emissions inventories for reporting purposes, and recommended references materials and web sites for more in-depth information, data or computational tools. Each subject entry provides a working overview of the technology, practice, piece of equipment, regulation, or other relevant issue as it pertains to pollution control and management. Cross referencing between related subjects is included to assist the reader to gain as much of a practical level of knowledge.