Download or read book Fracture Toughness and Atom Probe Characterization of a Highly Embrittled RPV Weld written by MA. Sokolov and published by . This book was released on 2004 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Heavy-Section Steel Irradiation Program at Oak Ridge National Laboratory (ORNL) includes a task to investigate the shape of the fracture toughness master curve for reactor pressure vessel steel highly embrittled as a consequence of irradiation exposure. A radiation-sensitive reactor pressure vessel (RPV) weld with intentionally enhanced copper content, designated KS-01, is characterized in terms of static initiation (KIc, KJc) and Charpy impact toughness in the unirradiated and irradiated conditions. The objective of this project is to investigate the ability of highly embrittled material to maintain the shape of the unirradiated transition fracture toughness curve, as well as to examine the ability of the Charpy 41-J shift to predict the fracture toughness shift at such a high level of embrittlement. Irradiation of this weld was performed at the University of Michigan Ford Reactor. Specimens of KS-01 weld were irradiated to about 0.74 x 1019 neutron/cm2 at 288°C. Irradiation resulted in Charpy ductile-to-brittle transition temperature (DBTT) shift of 169°C. It was anticipated that this shift would result in a fracture toughness transition temperature (at 100 MPa?m) in the irradiated condition near or slightly above the pressurized thermal shock screening criterion for weld metals, ToPTS = 129°C. The fracture toughness characterization of KS-01 weld in the unirradiated and irradiated conditions was mainly performed by testing 1T C(T), although some 0.5T C(T) and precracked Charpy specimens were used in this study. The master curve analysis showed that this material exhibited shift of reference fracture toughness transition temperature, To, of 165°C as result of radiation, which is in remarkable agreement with Charpy DBTT shift. The absolute value of To in the irradiated condition was determined to be equal to 139°C. This weld exhibited a low ductile initiation toughness (JQ) after irradiation. It left a relatively narrow temperature window to examine the shape of the transition region. Irradiated median fracture toughness values up to 148 MPa?m follow the master curve shape. However, low toughness brittle fractures occurred at temperatures further above To (To + 61°C) than expected with a leveling of the KJc data from the master curve shape. The microstructure of the weld was characterized with the ORNL's energy-compensated optical position-sensitive atom probe. Atom probe tomography revealed a high number density (~3 x 1024m-3) of Cu-, Mn-, Ni-, Si-, and P-enriched precipitates and a lower number density (~1 x 1023 m-3) of P clusters.
Download or read book Effects of Radiation on Materials written by Martin L. Grossbeck and published by ASTM International. This book was released on 2004 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Irradiation Embrittlement of Reactor Pressure Vessels RPVs in Nuclear Power Plants written by Naoki Soneda and published by Elsevier. This book was released on 2014-09-01 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactor Pressure Vessels (RPVs) contain the fuel and therefore the reaction at the heart of nuclear power plants. They are a life-determining structural component: if they suffer serious damage, the continued operation of the plant is in jeopardy. This book critically reviews irradiation embrittlement, the main degradation mechanism affecting RPV steels, and mitigation routes for managing the RPV lifetime. Part I reviews RPV design and fabrication in different countries, with an emphasis on the materials required, their important properties, and manufacturing technologies. Part II then considers RVP embrittlement in operational nuclear power plants using different reactors. Chapters are devoted to embrittlement in light-water reactors, including WWER-type reactors and Magnox reactors. Finally, Part III presents techniques for studying embrittlement, including irradiation simulation techniques, microstructural characterisation techniques, and probabilistic fracture mechanics. Irradiation Embrittlement of Reactor Pressure Vessels (RPVs) in Nuclear Power Plants provides a thorough review of an issue that is central to the safety of nuclear power generation. The book includes contributions from an international team of experts, and will be a useful resource for nuclear plant operators and managers, relevant regulatory and safety bodies, nuclear metallurgists and other academics in this field Discusses reactor pressure vessel (RPV) design and the effect irradiation embrittlement can have, the main degradation mechanism affecting RPVs Examines embrittlement processes in RPVs in different reactor types, as well as techniques for studying RPV embrittlement
Download or read book Fracture Toughness Characterization of Japanese Reactor Pressure Vessel Steels written by F. J. Loss and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ageing Studies and Lifetime Extension of Materials written by Les Mallinson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first International Conference on Ageing Studies and Lifetime Extension of Materials was held on th July 12-14 , 1999 at St. Catherine's College, Oxford, United Kingdom. Over 230 delegates attended during the three days and heard nearly ninety papers, together with over thirty poster presentations. Sixteen of these papers were keynotes from invited speakers eminent in their field of research. The proceedings were organised into six separate sessions: observation and understanding of real-time and accelerated ageing; experimental techniques; modelling and theoretical studies; lifetime prediction and validation; lifetime extension; and material design for ageing. In doing this, it was hoped to cover most issues of scientific concern inthefield ofmaterials ageing. One important aspect was that the conference did not concentrateon any particular group or type ofmaterial; rather the aim was to attract contributions from workers engaged in ageing studies with as wide a range of materials as possible. In this way, it was hoped that delegates could interactwith and learnfrom those whom they perhapswould not normally come across and that metallurgists could learn from polymer scientists, ceramicists could talk to modellers, and so on, in this important field. A read through the diverse papers contained within these proceedings will confirm that this aim was happily satisfied. Why hold such a meeting? In the modem world, engineered systems are expected to last longer.
Download or read book Dynamic Fracture Toughness Characterization of HY 100 Under Matched Welds written by Stephen M. Graham and published by . This book was released on 2000-02-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welds in marine structures are typically fabricated such that the yield strength of the weld metal is higher than the base plate (over-matched). Allowing the weld metal yield strength to be less than the base metal (under- matching) can increase productivity and weld metal toughness; however, there is some concern that under-matching increases the crack driving force and decreases the weld metal tearing resistance. This study examined fracture behavior of two HY-100 under-matched welds under dynamic loading. A new test fixture that provided greater control of specimen deflection during impact testing of SE(B) specimens was developed, as was a procedure for applying the Normalization Method to the analysis of dynamic fracture toughness tests. Successful application of Normalization involved using multiple specimens with varying ductile crack growth to establish the correct form for the plasticity function. The accuracy of the measured J(sub Id) was verified by comparing with multi- specimen J(sub Id) values. The results from these tests showed that the proximity of the crack tip to the fusion line had more effect on fracture behavior than mismatch level. Narrower fusion line margins led to lower tearing resistance and a greater propensity for fracture instability.
Download or read book INIS Atomindex written by and published by . This book was released on 1995 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by R. K. Nanstad and published by ASTM International. This book was released on 1999 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by Todd R. Allen and published by ASTM International. This book was released on 2006 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Toughness Characterization Procedures and Interpretations to Fracture safe Design for Structural Aluminium Alloys written by R. W. Judy and published by . This book was released on 1969 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by Arvind S. Kumar and published by ASTM International. This book was released on 1994 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Embrittlement of Nuclear Reactor Pressure Vessel Steels written by Lendell E. Steele and published by ASTM International. This book was released on 1993 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acta Polytechnica Scandinavica written by and published by . This book was released on 1998 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors’ unique personal insight from decades of frontline research, engineering and management. Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book Atom Probe Tomography written by Michael K. Miller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microanalytical technique of atom probe tomography (APT) permits the spatial coordinates and elemental identities of the individual atoms within a small volume to be determined with near atomic resolution. Therefore, atom probe tomography provides a technique for acquiring atomic resolution three dimensional images of the solute distribution within the microstructures of materials. This monograph is designed to provide researchers and students the necessary information to plan and experimentally conduct an atom probe tomography experiment. The techniques required to visualize and to analyze the resulting three-dimensional data are also described. The monograph is organized into chapters each covering a specific aspect of the technique. The development of this powerful microanalytical technique from the origins offield ion microscopy in 1951, through the first three-dimensional atom probe prototype built in 1986 to today's commercial state-of-the-art three dimensional atom probe is documented in chapter 1. A general introduction to atom probe tomography is also presented in chapter 1. The various methods to fabricate suitable needle-shaped specimens are presented in chapter 2. The procedure to form field ion images of the needle-shaped specimen is described in chapter 3. In addition, the appearance of microstructural features and the information that may be estimated from field ion microscopy are summarized. A brief account of the theoretical basis for processes of field ionization and field evaporation is also included.
