Download or read book Foundations of Real Time Computing Scheduling and Resource Management written by André M. van Tilborg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in real-time scheduling and resource management. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D.C. A companion volume by the title Foundations of Real-Time Computing: Fonnal Specifications and Methods complements this book by addressing many of the most advanced approaches currently being investigated in the arena of formal specification and verification of real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real-time computing systems on a scientific basis. Many of the papers in this book take care to define the notion of real-time system precisely, because it is often easy to misunderstand what is meant by that term. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the very difficult problems of scheduling tasks and resource management in computer systems whose performance is inextricably fused with the achievement of deadlines. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End-use applications of deadline-driven real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.

Download or read book Foundations of Real Time Computing written by Andre M Van Tilborg and published by . This book was released on 1991-07-31 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundations of Real Time Computing Formal Specifications and Methods written by André M. van Tilborg and published by Springer. This book was released on 2013-09-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in formal specification and verification of real-time computing systems. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D. C. A companion volume by the title Foundations of Real-Time Computing: Scheduling and Resource Management complements this hook by addressing many of the recently devised techniques and approaches for scheduling tasks and managing resources in real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real time computing systems on a scientific basis. The notion of real-time system has alternative interpretations, not all of which are intended usages in this collection of papers. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the formal specification and verification of computer software and systems whose correct performance is dependent on carefully orchestrated interactions with time, e. g. , meeting deadlines and synchronizing with clocks. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End use applications of real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.

Download or read book Foundations of Real Time Computing Scheduling and Resource Management written by André M. van Tilborg and published by Springer Science & Business Media. This book was released on 1991-07-31 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in real-time scheduling and resource management. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D.C. A companion volume by the title Foundations of Real-Time Computing: Fonnal Specifications and Methods complements this book by addressing many of the most advanced approaches currently being investigated in the arena of formal specification and verification of real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real-time computing systems on a scientific basis. Many of the papers in this book take care to define the notion of real-time system precisely, because it is often easy to misunderstand what is meant by that term. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the very difficult problems of scheduling tasks and resource management in computer systems whose performance is inextricably fused with the achievement of deadlines. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End-use applications of deadline-driven real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.

Download or read book Foundations of Real Time Computing Formal Specifications and Methods written by André M. van Tilborg and published by Springer. This book was released on 1991 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in formal specification and verification of real-time computing systems. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D. C. A companion volume by the title Foundations of Real-Time Computing: Scheduling and Resource Management complements this hook by addressing many of the recently devised techniques and approaches for scheduling tasks and managing resources in real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real time computing systems on a scientific basis. The notion of real-time system has alternative interpretations, not all of which are intended usages in this collection of papers. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the formal specification and verification of computer software and systems whose correct performance is dependent on carefully orchestrated interactions with time, e. g. , meeting deadlines and synchronizing with clocks. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End use applications of real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.

Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Fault Tolerant Real Time Systems written by Stefan Poledna and published by Springer Science & Business Media. This book was released on 2007-11-23 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time computer systems are very often subject to dependability requirements because of their application areas. Fly-by-wire airplane control systems, control of power plants, industrial process control systems and others are required to continue their function despite faults. Fault-tolerance and real-time requirements thus constitute a kind of natural combination in process control applications. Systematic fault-tolerance is based on redundancy, which is used to mask failures of individual components. The problem of replica determinism is thereby to ensure that replicated components show consistent behavior in the absence of faults. It might seem trivial that, given an identical sequence of inputs, replicated computer systems will produce consistent outputs. Unfortunately, this is not the case. The problem of replica non-determinism and the presentation of its possible solutions is the subject of Fault-Tolerant Real-Time Systems: The Problem of Replica Determinism. The field of automotive electronics is an important application area of fault-tolerant real-time systems. Systems like anti-lock braking, engine control, active suspension or vehicle dynamics control have demanding real-time and fault-tolerance requirements. These requirements have to be met even in the presence of very limited resources since cost is extremely important. Because of its interesting properties Fault-Tolerant Real-Time Systems gives an introduction to the application area of automotive electronics. The requirements of automotive electronics are a topic of discussion in the remainder of this work and are used as a benchmark to evaluate solutions to the problem of replica determinism.

Download or read book Event Triggered and Time Triggered Control Paradigms written by Roman Obermaisser and published by Springer Science & Business Media. This book was released on 2004-09-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Event-Triggered and Time-Triggered Control Paradigms presents a valuable survey about existing architectures for safety-critical applications and discusses the issues that must be considered when moving from a federated to an integrated architecture. The book focuses on one key topic - the amalgamation of the event-triggered and the time-triggered control paradigm into a coherent integrated architecture. The architecture provides for the integration of independent distributed application subsystems by introducing multi-criticality nodes and virtual networks of known temporal properties. The feasibility and the tangible advantages of this new architecture are demonstrated with practical examples taken from the automotive industry. Event-Triggered and Time-Triggered Control Paradigms offers significant insights into the architecture and design of integrated embedded systems, both at the conceptual and at the practical level.

Download or read book Real Time Systems Engineering and Applications written by Michael Schiebe and published by Springer Science & Business Media. This book was released on 2007-08-28 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-Time Systems Engineering and Applications is a well-structured collection of chapters pertaining to present and future developments in real-time systems engineering. After an overview of real-time processing, theoretical foundations are presented. The book then introduces useful modeling concepts and tools. This is followed by concentration on the more practical aspects of real-time engineering with a thorough overview of the present state of the art, both in hardware and software, including related concepts in robotics. Examples are given of novel real-time applications which illustrate the present state of the art. The book concludes with a focus on future developments, giving direction for new research activities and an educational curriculum covering the subject. This book can be used as a source for academic and industrial researchers as well as a textbook for computing and engineering courses covering the topic of real-time systems engineering.

Download or read book Fundamentals of Computer Graphics written by Steve Marschner and published by CRC Press. This book was released on 2018-10-24 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on an impressive roster of experts in the field, Fundamentals of Computer Graphics, Fourth Edition offers an ideal resource for computer course curricula as well as a user-friendly personal or professional reference. Focusing on geometric intuition, the book gives the necessary information for understanding how images get onto the screen by using the complementary approaches of ray tracing and rasterization. It covers topics common to an introductory course, such as sampling theory, texture mapping, spatial data structure, and splines. It also includes a number of contributed chapters from authors known for their expertise and clear way of explaining concepts. Highlights of the Fourth Edition Include: Updated coverage of existing topics Major updates and improvements to several chapters, including texture mapping, graphics hardware, signal processing, and data structures A text now printed entirely in four-color to enhance illustrative figures of concepts The fourth edition of Fundamentals of Computer Graphics continues to provide an outstanding and comprehensive introduction to basic computer graphic technology and theory. It retains an informal and intuitive style while improving precision, consistency, and completeness of material, allowing aspiring and experienced graphics programmers to better understand and apply foundational principles to the development of efficient code in creating film, game, or web designs. Key Features Provides a thorough treatment of basic and advanced topics in current graphics algorithms Explains core principles intuitively, with numerous examples and pseudo-code Gives updated coverage of the graphics pipeline, signal processing, texture mapping, graphics hardware, reflection models, and curves and surfaces Uses color images to give more illustrative power to concepts

Download or read book Real Time Systems Engineering and Applications written by Michael Schiebe and published by Springer Science & Business Media. This book was released on 1992-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-Time Systems Engineering and Applications is a well-structured collection of chapters pertaining to present and future developments in real-time systems engineering. After an overview of real-time processing, theoretical foundations are presented. The book then introduces useful modeling concepts and tools. This is followed by concentration on the more practical aspects of real-time engineering with a thorough overview of the present state of the art, both in hardware and software, including related concepts in robotics. Examples are given of novel real-time applications which illustrate the present state of the art. The book concludes with a focus on future developments, giving direction for new research activities and an educational curriculum covering the subject. This book can be used as a source for academic and industrial researchers as well as a textbook for computing and engineering courses covering the topic of real-time systems engineering.

Download or read book Constructing Predictable Real Time Systems written by Alexander D. Stoyenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real time Systems written by Wolfgang A. Halang and published by World Scientific. This book was released on 1992 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first comprehensive text in English on real-time and embedded computing systems. It is addressed to engineering students of universities and polytechnics as well as to practitioners and provides the knowledge required for the implementation of industrial computerized process control and manufacturing automation systems. The book avoids mathematical treatment and supports the relevance of the concepts introduced by practical examples and case studies. Special emphasis is placed on a sound conceptual basis and on methodologies and tools for the development of high quality control software, since software dependability has been identified as the major problem area of computerized process automation.

Download or read book Foundations of Computing written by Pradeep K. Sinhs and published by Bpb Publications. This book was released on 2002-11-01 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Thoughtfully Organized Book Has Been Designed To Provide Its Readers With A Sound Foundation Of Computers And Information Technology. The Number Of Chapters, Chapter Topics, And The Contents Of Each Chapter Have Been Carefully Chosen To Introduce The Readers To All Important Concepts Through A Single Book. Each Chapter Addresses The Fundamental Concepts, Popular Technologies, And Current State-Of-The-Art Topics. Complete With Numerous Illustrations And Examples, Chapter Summaries, End-Of-Chapter Questions, And A Glossary Of Important Terms, Foundations Of Computing Is Designed To Serve As An Ideal Textbook For Various Courses Offered In Computer Science, Information Technology, And Other Related Areas. You Will Find Sufficient Coverage Of All Major Topics In The Field, Including Several New And Advanced Topics, Such As:Software Engineering,Object-Oriented Programming,Network, Distributed, And Real-Time Operating Systems,Unix, Windows, And Linux Operating Systems,Relational, Object-Oriented, And Multimedia Databases,Data Warehousing And Data Mining,Information Security In Computer Systems,Multimedia Computing Systems And Applications,Wireless Networks,The Internet,And Many More&..

Download or read book Software Engineering for Real Time Systems Volume 1 written by Jim Cooling and published by Engineering of Real-Time Embed. This book was released on 2018-08-20 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Engineering for Real-time Systems, a three-volume book-set, aims to provide a firm foundation in the knowledge, skills and techniques needed to develop and produce real-time, and in particular, embedded systems. Their core purpose is to convince readers that these systems need to be engineered in a rigorous, professional and organised way. The objective of volume 1 is to give a good grounding in the basics of the subject. It begins by describing what real-time systems are, their structures and applications, and the impact of these on software design in general. Following this is a chapter that shows clearly why a professional design approach is imperative in order to produce safe, reliable and correct software. Next up is a chapter that deals with the issues of requirements extraction, analysis and specification, including the topics of rapid and animation prototyping. Rounding off volume 1 is a chapter that introduces the basic concepts of software and program design, including modularization, structured programming and mainstream software design methods The material, which forms the foundations for later work, is essential reading for those new to real-time software. Note for lecturers who adopt this book as a required course textbook. Supporting material is available, covering both exercises (Word) and course slides (PowerPoint). This is provided free of charge. For further information contact me at [email protected]. The author: Jim Cooling has had many years experience in the area of real-time embedded systems, including electronic, software and system design, project management, consultancy, education and course development. He has published extensively on the subject, his books covering many aspects of embedded-systems work such as real-time interfacing, programming, software design and software engineering. Currently he is a partner in Lindentree Associates (which he formed in 1998), providing consultancy and training for real-time embedded systems. See: www.lindentreeuk.co.uk

Download or read book Embedded Microprocessor Systems written by Christian Müller-Schloer and published by IOS Press. This book was released on 1996 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded microprocessor systems are affecting our daily lives at a fast pace, mostly unrecognised by the general public. Most of us are aware of the part they are playing in increasing business efficiency through office applications such as personal computers, printers and copiers. Only a few people, however, fully appreciate the growing role of embedded systems in telecommunications and industrial environments, or even in everyday products like cars and home appliances. The challenge to engineers and managers is not only highlighted by the sheer size of the market, ' 1.5 billion microcontrollers and microprocessors are produced every year ' but also by the accelerating innovation in embedded systems towards higher complexity in hardware, software and tools as well as towards higher performance and lower consumption. To maintain competitiveness in this demanding environment, an optimum mix of innovation, time to market and system cost is required. Choosing the right options and strategies for products and companies is crucial and rarely obvious. In this book the editors have, therefore, skilfully brought together more than fifty contributions from some of the leading authorities in embedded systems. The papers are conveniently grouped in four sections.

Download or read book Real time Linked Dataspaces written by Edward Curry and published by Springer Nature. This book was released on 2019-11-18 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the dataspace paradigm as a best-effort approach to data management within data ecosystems. It establishes the theoretical foundations and principles of real-time linked dataspaces as a data platform for intelligent systems. The book introduces a set of specialized best-effort techniques and models to enable loose administrative proximity and semantic integration for managing and processing events and streams. The book is divided into five major parts: Part I “Fundamentals and Concepts” details the motivation behind and core concepts of real-time linked dataspaces, and establishes the need to evolve data management techniques in order to meet the challenges of enabling data ecosystems for intelligent systems within smart environments. Further, it explains the fundamental concepts of dataspaces and the need for specialization in the processing of dynamic real-time data. Part II “Data Support Services” explores the design and evaluation of critical services, including catalog, entity management, query and search, data service discovery, and human-in-the-loop. In turn, Part III “Stream and Event Processing Services” addresses the design and evaluation of the specialized techniques created for real-time support services including complex event processing, event service composition, stream dissemination, stream matching, and approximate semantic matching. Part IV “Intelligent Systems and Applications” explores the use of real-time linked dataspaces within real-world smart environments. In closing, Part V “Future Directions” outlines future research challenges for dataspaces, data ecosystems, and intelligent systems. Readers will gain a detailed understanding of how the dataspace paradigm is now being used to enable data ecosystems for intelligent systems within smart environments. The book covers the fundamental theory, the creation of new techniques needed for support services, and lessons learned from real-world intelligent systems and applications focused on sustainability. Accordingly, it will benefit not only researchers and graduate students in the fields of data management, big data, and IoT, but also professionals who need to create advanced data management platforms for intelligent systems, smart environments, and data ecosystems.